powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKED

The flag EEH_PE_RESET indicates blocking config space of the PE
during reset time. We potentially need block PE's config space
other than reset time. So it's reasonable to replace it with
EEH_PE_CFG_BLOCKED to indicate its usage.

There are no substantial code or logic changes in this patch.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/eeh.h

@@ -71,7 +71,7 @@ struct device_node;
 
 #define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
-#define EEH_PE_RESET		(1 << 2)	/* PE reset in progress	*/
+#define EEH_PE_CFG_BLOCKED	(1 << 2)	/* Block config access	*/
 
 #define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
 

arch/powerpc/kernel/eeh.c

@@ -673,18 +673,18 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 	switch (state) {
 	case pcie_deassert_reset:
 		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
-		eeh_pe_state_clear(pe, EEH_PE_RESET);
+		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		break;
 	case pcie_hot_reset:
-		eeh_pe_state_mark(pe, EEH_PE_RESET);
+		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
-		eeh_pe_state_mark(pe, EEH_PE_RESET);
+		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
-		eeh_pe_state_clear(pe, EEH_PE_RESET);
+		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		return -EINVAL;
 	};
 
@@ -1523,7 +1523,7 @@ int eeh_pe_reset(struct eeh_pe *pe, int option)
 	switch (option) {
 	case EEH_RESET_DEACTIVATE:
 		ret = eeh_ops->reset(pe, option);
-		eeh_pe_state_clear(pe, EEH_PE_RESET);
+		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		if (ret)
 			break;
 
@@ -1538,7 +1538,7 @@ int eeh_pe_reset(struct eeh_pe *pe, int option)
 		 */
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 
-		eeh_pe_state_mark(pe, EEH_PE_RESET);
+		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		ret = eeh_ops->reset(pe, option);
 		break;
 	default:

arch/powerpc/kernel/eeh_driver.c

@@ -528,13 +528,13 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe)
 	eeh_pe_dev_traverse(pe, eeh_report_error, &result);
 
 	/* Issue reset */
-	eeh_pe_state_mark(pe, EEH_PE_RESET);
+	eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 	ret = eeh_reset_pe(pe);
 	if (ret) {
-		eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_RESET);
+		eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_CFG_BLOCKED);
 		return ret;
 	}
-	eeh_pe_state_clear(pe, EEH_PE_RESET);
+	eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 
 	/* Unfreeze the PE */
 	ret = eeh_clear_pe_frozen_state(pe, true);
@@ -601,10 +601,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * config accesses. So we prefer to block them. However, controlled
 	 * PCI config accesses initiated from EEH itself are allowed.
 	 */
-	eeh_pe_state_mark(pe, EEH_PE_RESET);
+	eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 	rc = eeh_reset_pe(pe);
 	if (rc) {
-		eeh_pe_state_clear(pe, EEH_PE_RESET);
+		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		return rc;
 	}
 
@@ -613,7 +613,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	/* Restore PE */
 	eeh_ops->configure_bridge(pe);
 	eeh_pe_restore_bars(pe);
-	eeh_pe_state_clear(pe, EEH_PE_RESET);
+	eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 
 	/* Clear frozen state */
 	rc = eeh_clear_pe_frozen_state(pe, false);

arch/powerpc/kernel/rtas_pci.c

@@ -111,7 +111,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 #ifdef CONFIG_EEH
 	edev = of_node_to_eeh_dev(dn);
-	if (edev && edev->pe && edev->pe->state & EEH_PE_RESET)
+	if (edev && edev->pe && edev->pe->state & EEH_PE_CFG_BLOCKED)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 #endif
 
@@ -175,7 +175,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 #ifdef CONFIG_EEH
 	edev = of_node_to_eeh_dev(dn);
-	if (edev && edev->pe && (edev->pe->state & EEH_PE_RESET))
+	if (edev && edev->pe && (edev->pe->state & EEH_PE_CFG_BLOCKED))
 		return PCIBIOS_DEVICE_NOT_FOUND;
 #endif
 	ret = rtas_write_config(pdn, where, size, val);

arch/powerpc/platforms/powernv/eeh-ioda.c

@@ -373,7 +373,7 @@ static int ioda_eeh_get_pe_state(struct eeh_pe *pe)
 	 * moving forward, we have to return operational
 	 * state during PE reset.
 	 */
-	if (pe->state & EEH_PE_RESET) {
+	if (pe->state & EEH_PE_CFG_BLOCKED) {
 		result = (EEH_STATE_MMIO_ACTIVE  |
 			  EEH_STATE_DMA_ACTIVE   |
 			  EEH_STATE_MMIO_ENABLED |

arch/powerpc/platforms/powernv/pci.c

@@ -513,7 +513,7 @@ static bool pnv_pci_cfg_check(struct pci_controller *hose,
 	edev = of_node_to_eeh_dev(dn);
 	if (edev) {
 		if (edev->pe &&
-		    (edev->pe->state & EEH_PE_RESET))
+		    (edev->pe->state & EEH_PE_CFG_BLOCKED))
 			return false;
 
 		if (edev->mode & EEH_DEV_REMOVED)