arm64: dts: allwinner: Add mali GPU supply for H6 boards

Enable and add supply to the Mali GPU node on all the
H6 boards.

Regarding the datasheet the maximum time for supply to reach
its voltage is 32ms.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -89,6 +89,11 @@ &emac {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -225,6 +230,7 @@ reg_dcdca: dcdca {
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -103,6 +103,11 @@ &ehci3 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -238,6 +243,7 @@ reg_dcdca: dcdca {
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -55,6 +55,11 @@ &ehci3 {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
@@ -163,6 +168,7 @@ reg_dcdca: dcdca {
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";

arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

@@ -85,6 +85,11 @@ &de {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -221,6 +226,7 @@ reg_dcdca: dcdca {
 			};
 
 			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
 				regulator-min-microvolt = <810000>;
 				regulator-max-microvolt = <1080000>;
 				regulator-name = "vdd-gpu";