mac80211: restrict aggregation to supported interface modes

We can only support aggregation on AP/STA right now. HT isn't defined
for IBSS, WDS or MESH. In the WDS/MESH cases it's not clear what to
put into the IBSS field, and we don't handle that in the code at all.
Also fix the code to handle VLAN correctly.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

net/mac80211/agg-rx.c

@@ -134,7 +134,8 @@ static void ieee80211_send_addba_resp(struct ieee80211_sub_if_data *sdata, u8 *d
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);

net/mac80211/agg-tx.c

@@ -41,7 +41,8 @@ static void ieee80211_send_addba_request(struct ieee80211_sub_if_data *sdata,
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
@@ -180,6 +181,19 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 		goto exit;
 	}
 
+	/*
+	 * The aggregation code is not prepared to handle
+	 * anything but STA/AP due to the BSSID handling.
+	 * IBSS could work in the code but isn't supported
+	 * by drivers or the standard.
+	 */
+	if (sta->sdata->vif.type != NL80211_IFTYPE_STATION &&
+	    sta->sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+	    sta->sdata->vif.type != NL80211_IFTYPE_AP) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
 	spin_lock_bh(&sta->lock);
 
 	/* we have tried too many times, receiver does not want A-MPDU */

net/mac80211/ht.c

@@ -190,7 +190,8 @@ void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	if (sdata->vif.type == NL80211_IFTYPE_AP)
+	if (sdata->vif.type == NL80211_IFTYPE_AP ||
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	else
 		memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);

net/mac80211/rx.c

@@ -1768,6 +1768,17 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 
 	switch (mgmt->u.action.category) {
 	case WLAN_CATEGORY_BACK:
+		/*
+		 * The aggregation code is not prepared to handle
+		 * anything but STA/AP due to the BSSID handling;
+		 * IBSS could work in the code but isn't supported
+		 * by drivers or the standard.
+		 */
+		if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+		    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+		    sdata->vif.type != NL80211_IFTYPE_AP)
+			return RX_DROP_MONITOR;
+
 		switch (mgmt->u.action.u.addba_req.action_code) {
 		case WLAN_ACTION_ADDBA_REQ:
 			if (len < (IEEE80211_MIN_ACTION_SIZE +