ARM: S5PC100: CPU initialization

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

arch/arm/mach-s5pc100/cpu.c

+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+	/* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s5pc1xx_register_clocks();
+	s5pc100_register_clocks();
+	s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+	u32 vic_valid[] = {~0, ~0, ~0};
+
+	/* VIC0, VIC1, and VIC2 are fully populated. */
+	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+	.name	= "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+	.cls	= &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+	return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+	return sysdev_register(&s5pc100_sysdev);
+}

arch/arm/mach-s5pc100/include/mach/debug-macro.S

+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>

arch/arm/mach-s5pc100/include/mach/entry-macro.S

+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm

arch/arm/mach-s5pc100/include/mach/hardware.h

+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-s5pc100/include/mach/system.h

+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s5pc100/include/mach/uncompress.h

+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */

arch/arm/plat-s5pc1xx/cpu.c

+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
+		.length		= SZ_16,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}

arch/arm/plat-s5pc1xx/include/plat/s5pc100.h

+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+

arch/arm/plat-s5pc1xx/s5pc100-init.c

+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}