[PATCH] I2O: fix and workaround for Motorola/Freescale controller

- This controller violates the I2O spec for the I/O registers.  The patch
  contains a workaround which moves the registers to the proper location.
  (originally author: Matthew Starzewski)

- If a message frame is beyond the mapped address range a error is
  returned.
Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/message/i2o/core.h

@@ -60,4 +60,7 @@ extern void i2o_iop_remove(struct i2o_controller *);
 #define I2O_IN_PORT	0x40
 #define I2O_OUT_PORT	0x44
 
+/* Motorola/Freescale specific register offset */
+#define I2O_MOTOROLA_PORT_OFFSET	0x10400
+
 #define I2O_IRQ_OUTBOUND_POST	0x00000008

drivers/message/i2o/pci.c

@@ -168,6 +168,24 @@ static int __devinit i2o_pci_alloc(struct i2o_controller *c)
 	c->in_port = c->base.virt + I2O_IN_PORT;
 	c->out_port = c->base.virt + I2O_OUT_PORT;
 
+	/* Motorola/Freescale chip does not follow spec */
+	if (pdev->vendor == PCI_VENDOR_ID_MOTOROLA && pdev->device == 0x18c0) {
+		/* Check if CPU is enabled */
+		if (be32_to_cpu(readl(c->base.virt + 0x10000)) & 0x10000000) {
+			printk(KERN_INFO "%s: MPC82XX needs CPU running to "
+			       "service I2O.\n", c->name);
+			i2o_pci_free(c);
+			return -ENODEV;
+		} else {
+			c->irq_status += I2O_MOTOROLA_PORT_OFFSET;
+			c->irq_mask += I2O_MOTOROLA_PORT_OFFSET;
+			c->in_port += I2O_MOTOROLA_PORT_OFFSET;
+			c->out_port += I2O_MOTOROLA_PORT_OFFSET;
+			printk(KERN_INFO "%s: MPC82XX workarounds activated.\n",
+			       c->name);
+		}
+	}
+
 	if (i2o_dma_alloc(dev, &c->status, 8, GFP_KERNEL)) {
 		i2o_pci_free(c);
 		return -ENOMEM;

include/linux/i2o.h

@@ -1115,9 +1115,11 @@ static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
 		return ERR_PTR(-ENOMEM);
 
 	mmsg->mfa = readl(c->in_port);
-	if (mmsg->mfa == I2O_QUEUE_EMPTY) {
+	if (unlikely(mmsg->mfa >= c->in_queue.len)) {
 		mempool_free(mmsg, c->in_msg.mempool);
-		return ERR_PTR(-EBUSY);
+		if(mmsg->mfa == I2O_QUEUE_EMPTY)
+			return ERR_PTR(-EBUSY);
+		return ERR_PTR(-EFAULT);
 	}
 
 	return &mmsg->msg;