Commit 8b4c0009 authored by Vishal Thanki's avatar Vishal Thanki Committed by Kalle Valo

rt2x00usb: Use usb anchor to manage URB

With current driver, it is observed that a URB is not
completed while the USB disconnect is initiated. Due to
that, the URB completion handler is trying to access
the resource which was freed as a part of USB disconnect.
Managing the URBs with anchor will make sure that all
the URBs are handled gracefully before device gets
disconnected.
Signed-off-by: default avatarVishal Thanki <vishalthanki@gmail.com>
Acked-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent e32993eb
......@@ -38,6 +38,7 @@
#include <linux/kfifo.h>
#include <linux/hrtimer.h>
#include <linux/average.h>
#include <linux/usb.h>
#include <net/mac80211.h>
......@@ -1002,6 +1003,8 @@ struct rt2x00_dev {
/* Extra TX headroom required for alignment purposes. */
unsigned int extra_tx_headroom;
struct usb_anchor *anchor;
};
struct rt2x00_bar_list_entry {
......
......@@ -1422,11 +1422,14 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
cancel_work_sync(&rt2x00dev->intf_work);
cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
cancel_work_sync(&rt2x00dev->sleep_work);
#ifdef CONFIG_RT2X00_LIB_USB
if (rt2x00_is_usb(rt2x00dev)) {
usb_kill_anchored_urbs(rt2x00dev->anchor);
hrtimer_cancel(&rt2x00dev->txstatus_timer);
cancel_work_sync(&rt2x00dev->rxdone_work);
cancel_work_sync(&rt2x00dev->txdone_work);
}
#endif
if (rt2x00dev->workqueue)
destroy_workqueue(rt2x00dev->workqueue);
......
......@@ -171,8 +171,11 @@ static void rt2x00usb_register_read_async_cb(struct urb *urb)
{
struct rt2x00_async_read_data *rd = urb->context;
if (rd->callback(rd->rt2x00dev, urb->status, le32_to_cpu(rd->reg))) {
if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
usb_anchor_urb(urb, rd->rt2x00dev->anchor);
if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
usb_unanchor_urb(urb);
kfree(rd);
}
} else
kfree(rd);
}
......@@ -206,8 +209,11 @@ void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
usb_fill_control_urb(urb, usb_dev, usb_rcvctrlpipe(usb_dev, 0),
(unsigned char *)(&rd->cr), &rd->reg, sizeof(rd->reg),
rt2x00usb_register_read_async_cb, rd);
if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
usb_anchor_urb(urb, rt2x00dev->anchor);
if (usb_submit_urb(urb, GFP_ATOMIC) < 0) {
usb_unanchor_urb(urb);
kfree(rd);
}
usb_free_urb(urb);
}
EXPORT_SYMBOL_GPL(rt2x00usb_register_read_async);
......@@ -313,8 +319,10 @@ static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data)
entry->skb->data, length,
rt2x00usb_interrupt_txdone, entry);
usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
usb_unanchor_urb(entry_priv->urb);
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
......@@ -402,8 +410,10 @@ static bool rt2x00usb_kick_rx_entry(struct queue_entry *entry, void *data)
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
usb_unanchor_urb(entry_priv->urb);
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
......@@ -818,6 +828,13 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
if (retval)
goto exit_free_reg;
rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
sizeof(struct usb_anchor),
GFP_KERNEL);
if (!rt2x00dev->anchor)
goto exit_free_reg;
init_usb_anchor(rt2x00dev->anchor);
return 0;
exit_free_reg:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment