Merge kroah.com:/home/greg/linux/BK/bleed-2.6

into kroah.com:/home/greg/linux/BK/pci-2.6

Documentation/PCIEBUS-HOWTO.txt

+		The PCI Express Port Bus Driver Guide HOWTO
+	Tom L Nguyen tom.l.nguyen@intel.com
+			11/03/2004
+
+1. About this guide
+
+This guide describes the basics of the PCI Express Port Bus driver
+and provides information on how to enable the service drivers to
+register/unregister with the PCI Express Port Bus Driver.
+
+2. Copyright 2004 Intel Corporation
+
+3. What is the PCI Express Port Bus Driver
+
+A PCI Express Port is a logical PCI-PCI Bridge structure. There
+are two types of PCI Express Port: the Root Port and the Switch
+Port. The Root Port originates a PCI Express link from a PCI Express
+Root Complex and the Switch Port connects PCI Express links to
+internal logical PCI buses. The Switch Port, which has its secondary
+bus representing the switch's internal routing logic, is called the
+switch's Upstream Port. The switch's Downstream Port is bridging from
+switch's internal routing bus to a bus representing the downstream
+PCI Express link from the PCI Express Switch.
+
+A PCI Express Port can provide up to four distinct functions,
+referred to in this document as services, depending on its port type.
+PCI Express Port's services include native hotplug support (HP),
+power management event support (PME), advanced error reporting
+support (AER), and virtual channel support (VC). These services may
+be handled by a single complex driver or be individually distributed
+and handled by corresponding service drivers.
+
+4. Why use the PCI Express Port Bus Driver?
+
+In existing Linux kernels, the Linux Device Driver Model allows a
+physical device to be handled by only a single driver. The PCI
+Express Port is a PCI-PCI Bridge device with multiple distinct
+services. To maintain a clean and simple solution each service
+may have its own software service driver. In this case several
+service drivers will compete for a single PCI-PCI Bridge device.
+For example, if the PCI Express Root Port native hotplug service
+driver is loaded first, it claims a PCI-PCI Bridge Root Port. The
+kernel therefore does not load other service drivers for that Root
+Port. In other words, it is impossible to have multiple service
+drivers load and run on a PCI-PCI Bridge device simultaneously
+using the current driver model.
+
+To enable multiple service drivers running simultaneously requires
+having a PCI Express Port Bus driver, which manages all populated
+PCI Express Ports and distributes all provided service requests
+to the corresponding service drivers as required. Some key
+advantages of using the PCI Express Port Bus driver are listed below:
+
+	- Allow multiple service drivers to run simultaneously on
+	  a PCI-PCI Bridge Port device.
+
+	- Allow service drivers implemented in an independent
+	  staged approach.
+	
+	- Allow one service driver to run on multiple PCI-PCI Bridge
+	  Port devices. 
+
+	- Manage and distribute resources of a PCI-PCI Bridge Port
+	  device to requested service drivers.
+
+5. Configuring the PCI Express Port Bus Driver vs. Service Drivers
+
+5.1 Including the PCI Express Port Bus Driver Support into the Kernel
+
+Including the PCI Express Port Bus driver depends on whether the PCI
+Express support is included in the kernel config. The kernel will
+automatically include the PCI Express Port Bus driver as a kernel
+driver when the PCI Express support is enabled in the kernel.
+
+5.2 Enabling Service Driver Support
+
+PCI device drivers are implemented based on Linux Device Driver Model.
+All service drivers are PCI device drivers. As discussed above, it is
+impossible to load any service driver once the kernel has loaded the
+PCI Express Port Bus Driver. To meet the PCI Express Port Bus Driver
+Model requires some minimal changes on existing service drivers that
+imposes no impact on the functionality of existing service drivers.
+
+A service driver is required to use the two APIs shown below to
+register its service with the PCI Express Port Bus driver (see 
+section 5.2.1 & 5.2.2). It is important that a service driver
+initializes the pcie_port_service_driver data structure, included in
+header file /include/linux/pcieport_if.h, before calling these APIs.
+Failure to do so will result an identity mismatch, which prevents
+the PCI Express Port Bus driver from loading a service driver.
+
+5.2.1 pcie_port_service_register
+
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+
+This API replaces the Linux Driver Model's pci_module_init API. A
+service driver should always calls pcie_port_service_register at
+module init. Note that after service driver being loaded, calls
+such as pci_enable_device(dev) and pci_set_master(dev) are no longer
+necessary since these calls are executed by the PCI Port Bus driver.
+
+5.2.2 pcie_port_service_unregister
+
+void pcie_port_service_unregister(struct pcie_port_service_driver *new)
+
+pcie_port_service_unregister replaces the Linux Driver Model's
+pci_unregister_driver. It's always called by service driver when a
+module exits.
+
+5.2.3 Sample Code
+
+Below is sample service driver code to initialize the port service
+driver data structure.
+
+static struct pcie_port_service_id service_id[] = { {
+	.vendor = PCI_ANY_ID,
+	.device = PCI_ANY_ID,
+	.port_type = PCIE_RC_PORT,
+	.service_type = PCIE_PORT_SERVICE_AER,
+	}, { /* end: all zeroes */ }
+};
+
+static struct pcie_port_service_driver root_aerdrv = {
+	.name		= (char *)device_name,
+	.id_table	= &service_id[0],
+
+	.probe		= aerdrv_load,
+	.remove		= aerdrv_unload,
+
+	.suspend	= aerdrv_suspend,
+	.resume		= aerdrv_resume,
+};
+
+Below is a sample code for registering/unregistering a service
+driver.
+
+static int __init aerdrv_service_init(void)
+{
+	int retval = 0;
+	
+	retval = pcie_port_service_register(&root_aerdrv);
+	if (!retval) {
+		/*
+		 * FIX ME
+		 */
+	}
+	return retval;
+}
+
+static void __exit aerdrv_service_exit(void) 
+{
+	pcie_port_service_unregister(&root_aerdrv);
+}
+
+module_init(aerdrv_service_init);
+module_exit(aerdrv_service_exit);
+
+6. Possible Resource Conflicts
+
+Since all service drivers of a PCI-PCI Bridge Port device are
+allowed to run simultaneously, below lists a few of possible resource
+conflicts with proposed solutions.
+
+6.1 MSI Vector Resource
+
+The MSI capability structure enables a device software driver to call
+pci_enable_msi to request MSI based interrupts. Once MSI interrupts
+are enabled on a device, it stays in this mode until a device driver
+calls pci_disable_msi to disable MSI interrupts and revert back to
+INTx emulation mode. Since service drivers of the same PCI-PCI Bridge
+port share the same physical device, if an individual service driver
+calls pci_enable_msi/pci_disable_msi it may result unpredictable
+behavior. For example, two service drivers run simultaneously on the
+same physical Root Port. Both service drivers call pci_enable_msi to
+request MSI based interrupts. A service driver may not know whether
+any other service drivers have run on this Root Port. If either one
+of them calls pci_disable_msi, it puts the other service driver
+in a wrong interrupt mode. 
+
+To avoid this situation all service drivers are not permitted to
+switch interrupt mode on its device. The PCI Express Port Bus driver
+is responsible for determining the interrupt mode and this should be
+transparent to service drivers. Service drivers need to know only
+the vector IRQ assigned to the field irq of struct pcie_device, which
+is passed in when the PCI Express Port Bus driver probes each service
+driver. Service drivers should use (struct pcie_device*)dev->irq to
+call request_irq/free_irq. In addition, the interrupt mode is stored
+in the field interrupt_mode of struct pcie_device.
+
+6.2 MSI-X Vector Resources
+
+Similar to the MSI a device driver for an MSI-X capable device can
+call pci_enable_msix to request MSI-X interrupts. All service drivers
+are not permitted to switch interrupt mode on its device. The PCI
+Express Port Bus driver is responsible for determining the interrupt
+mode and this should be transparent to service drivers. Any attempt
+by service driver to call pci_enable_msix/pci_disable_msix may
+result unpredictable behavior. Service drivers should use
+(struct pcie_device*)dev->irq and call request_irq/free_irq.
+
+6.3 PCI Memory/IO Mapped Regions
+
+Service drivers for PCI Express Power Management (PME), Advanced
+Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access
+PCI configuration space on the PCI Express port. In all cases the
+registers accessed are independent of each other. This patch assumes
+that all service drivers will be well behaved and not overwrite
+other service driver's configuration settings.
+
+6.4 PCI Config Registers
+
+Each service driver runs its PCI config operations on its own
+capability structure except the PCI Express capability structure, in
+which Root Control register and Device Control register are shared
+between PME and AER. This patch assumes that all service drivers
+will be well behaved and not overwrite other service driver's
+configuration settings.

arch/i386/Kconfig

@@ -1131,6 +1131,8 @@ config PCI_MMCONFIG
 	select ACPI_BOOT
 	default y
 
+source "drivers/pci/pcie/Kconfig"
+
 source "drivers/pci/Kconfig"
 
 config ISA

arch/i386/pci/pcbios.c

@@ -385,8 +385,8 @@ void __devinit pcibios_sort(void)
 			}
 		}
 		if (!found) {
-			printk(KERN_WARNING "PCI: Device %02x:%02x not found by BIOS\n",
-				dev->bus->number, dev->devfn);
+			printk(KERN_WARNING "PCI: Device %s not found by BIOS\n",
+				pci_name(dev));
 			list_del(&dev->global_list);
 			list_add_tail(&dev->global_list, &sorted_devices);
 		}

drivers/pci/Makefile

@@ -56,4 +56,6 @@ $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
 # Files generated that shall be removed upon make clean
 clean-files := devlist.h classlist.h
 
+# Build PCI Express stuff if needed
+obj-$(CONFIG_PCIEPORTBUS) += pcie/
 

drivers/pci/access.c

@@ -7,7 +7,7 @@
  * configuration space.
  */
 
-static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(pci_lock);
 
 /*
  *  Wrappers for all PCI configuration access functions.  They just check

drivers/pci/hotplug/Kconfig

@@ -134,27 +134,6 @@ config HOTPLUG_PCI_CPCI_GENERIC
 
 	  When in doubt, say N.
 
-config HOTPLUG_PCI_PCIE
-	tristate "PCI Express Hotplug driver"
-	depends on HOTPLUG_PCI
-	help
-	  Say Y here if you have a motherboard that supports PCI Express Native
-	  Hotplug
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pciehp.
-
-	  When in doubt, say N.
-
-config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
-	bool "Use polling mechanism for hot-plug events (for testing purpose)"
-	depends on HOTPLUG_PCI_PCIE
-	help
-	  Say Y here if you want to use the polling mechanism for hot-plug 
-	  events for early platform testing.
-	   
-	  When in doubt, say N.
-
 config HOTPLUG_PCI_SHPC
 	tristate "SHPC PCI Hotplug driver"
 	depends on HOTPLUG_PCI

drivers/pci/hotplug/pciehp.h

@@ -34,6 +34,7 @@
 #include <linux/delay.h>
 #include <asm/semaphore.h>
 #include <asm/io.h>		
+#include <linux/pcieport_if.h>
 #include "pci_hotplug.h"
 
 #define MY_NAME	"pciehp"
@@ -311,7 +312,7 @@ enum php_ctlr_type {
 
 typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id);
 
-int pcie_init(struct controller *ctrl, struct pci_dev *pdev,
+int pcie_init(struct controller *ctrl, struct pcie_device *dev,
 		php_intr_callback_t attention_button_callback,
 		php_intr_callback_t switch_change_callback,
 		php_intr_callback_t presence_change_callback,

drivers/pci/hotplug/pciehp_core.c

@@ -40,6 +40,7 @@
 #include <asm/uaccess.h>
 #include "pciehp.h"
 #include "pciehprm.h"
+#include <linux/interrupt.h>
 
 /* Global variables */
 int pciehp_debug;
@@ -346,7 +347,7 @@ static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe
 	return 0;
 }
 
-static int pcie_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_id *id)
 {
 	int rc;
 	struct controller *ctrl;
@@ -354,7 +355,9 @@ static int pcie_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int first_device_num = 0 ;	/* first PCI device number supported by this PCIE */  
 	int num_ctlr_slots;		/* number of slots supported by this HPC */
 	u8 value;
-
+	struct pci_dev *pdev;
+	
+	dbg("%s: Called by hp_drv\n", __FUNCTION__);
 	ctrl = kmalloc(sizeof(*ctrl), GFP_KERNEL);
 	if (!ctrl) {
 		err("%s : out of memory\n", __FUNCTION__);
@@ -363,8 +366,10 @@ static int pcie_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	memset(ctrl, 0, sizeof(struct controller));
 
 	dbg("%s: DRV_thread pid = %d\n", __FUNCTION__, current->pid);
+	
+	pdev = dev->port;
 
-	rc = pcie_init(ctrl, pdev,
+	rc = pcie_init(ctrl, dev,
 		(php_intr_callback_t) pciehp_handle_attention_button,
 		(php_intr_callback_t) pciehp_handle_switch_change,
 		(php_intr_callback_t) pciehp_handle_presence_change,
@@ -562,32 +567,52 @@ static void __exit unload_pciehpd(void)
 
 }
 
+int hpdriver_context = 0;
 
-static struct pci_device_id pcied_pci_tbl[] = {
-	{
-	.class =        ((PCI_CLASS_BRIDGE_PCI << 8) | 0x00),
-	.class_mask =	~0,
-	.vendor =       PCI_ANY_ID,
-	.device =       PCI_ANY_ID,
-	.subvendor =    PCI_ANY_ID,
-	.subdevice =    PCI_ANY_ID,
-	},
-	
-	{ /* end: all zeroes */ }
-};
-
-MODULE_DEVICE_TABLE(pci, pcied_pci_tbl);
+static void pciehp_remove (struct pcie_device *device)
+{
+	printk("%s ENTRY\n", __FUNCTION__);	
+	printk("%s -> Call free_irq for irq = %d\n",  
+		__FUNCTION__, device->irq);
+	free_irq(device->irq, &hpdriver_context);
+}
 
+#ifdef CONFIG_PM
+static int pciehp_suspend (struct pcie_device *dev, u32 state)
+{
+	printk("%s ENTRY\n", __FUNCTION__);	
+	return 0;
+}
 
+static int pciehp_resume (struct pcie_device *dev)
+{
+	printk("%s ENTRY\n", __FUNCTION__);	
+	return 0;
+}
+#endif
 
-static struct pci_driver pcie_driver = {
-	.name		=	PCIE_MODULE_NAME,
-	.id_table	=	pcied_pci_tbl,
-	.probe		=	pcie_probe,
-	/* remove:	pcie_remove_one, */
+static struct pcie_port_service_id port_pci_ids[] = { { 
+	.vendor = PCI_ANY_ID, 
+	.device = PCI_ANY_ID,
+	.port_type = PCIE_RC_PORT, 
+	.service_type = PCIE_PORT_SERVICE_HP,
+	.driver_data =	0, 
+	}, { /* end: all zeroes */ }
 };
+static const char device_name[] = "hpdriver";
 
+static struct pcie_port_service_driver hpdriver_portdrv = {
+	.name		= (char *)device_name,
+	.id_table	= &port_pci_ids[0],
 
+	.probe		= pciehp_probe,
+	.remove		= pciehp_remove,
+
+#ifdef	CONFIG_PM
+	.suspend	= pciehp_suspend,
+	.resume		= pciehp_resume,
+#endif	/* PM */
+};
 
 static int __init pcied_init(void)
 {
@@ -603,9 +628,11 @@ static int __init pcied_init(void)
 
 	retval = pciehprm_init(PCI);
 	if (!retval) {
-		retval = pci_register_driver(&pcie_driver);
-		dbg("pci_register_driver = %d\n", retval);
-		info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ 		retval = pcie_port_service_register(&hpdriver_portdrv);
+ 		dbg("pcie_port_service_register = %d\n", retval);
+  		info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+ 		if (retval)
+ 		   dbg("%s: Failure to register service\n", __FUNCTION__);
 	}
 
 error_hpc_init:
@@ -625,8 +652,8 @@ static void __exit pcied_cleanup(void)
 
 	pciehprm_cleanup();
 
-	dbg("pci_unregister_driver\n");
-	pci_unregister_driver(&pcie_driver);
+	dbg("pcie_port_service_unregister\n");
+	pcie_port_service_unregister(&hpdriver_portdrv);
 
 	info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
 }

drivers/pci/hotplug/pciehp_hpc.c

@@ -1249,7 +1249,7 @@ static struct hpc_ops pciehp_hpc_ops = {
 };
 
 int pcie_init(struct controller * ctrl,
-	struct pci_dev *pdev,
+	struct pcie_device *dev,
 	php_intr_callback_t attention_button_callback,
 	php_intr_callback_t switch_change_callback,
 	php_intr_callback_t presence_change_callback,
@@ -1265,6 +1265,7 @@ int pcie_init(struct controller * ctrl,
 	u32 slot_cap;
 	int cap_base, saved_cap_base;
 	u16 slot_status, slot_ctrl;
+	struct pci_dev *pdev;
 
 	DBG_ENTER_ROUTINE
 	
@@ -1277,7 +1278,8 @@ int pcie_init(struct controller * ctrl,
 	}
 
 	memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s));
-
+	
+	pdev = dev->port;
 	php_ctlr->pci_dev = pdev;	/* save pci_dev in context */
 
 	dbg("%s: pdev->vendor %x pdev->device %x\n", __FUNCTION__,
@@ -1338,7 +1340,7 @@ int pcie_init(struct controller * ctrl,
 	}
 
 	dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, 
-		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), pdev->irq);
+		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq);
 	for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
 		if (pci_resource_len(pdev, rc) > 0)
 			dbg("pci resource[%d] start=0x%lx(len=0x%lx)\n", rc,
@@ -1355,7 +1357,7 @@ int pcie_init(struct controller * ctrl,
 	init_waitqueue_head(&ctrl->queue);
 
 	/* find the IRQ */
-	php_ctlr->irq = pdev->irq;
+	php_ctlr->irq = dev->irq;
 	dbg("HPC interrupt = %d\n", php_ctlr->irq);
 
 	/* Save interrupt callback info */
@@ -1407,17 +1409,6 @@ int pcie_init(struct controller * ctrl,
 		start_int_poll_timer( php_ctlr, 10 );   /* start with 10 second delay */
 	} else {
 		/* Installs the interrupt handler */
-		dbg("%s: pcie_mch_quirk = %x\n", __FUNCTION__, pcie_mch_quirk);
-		if (!pcie_mch_quirk) {
-			rc = pci_enable_msi(pdev);
-			if (rc) {
-				info("Can't get msi for the hotplug controller\n");
-				info("Use INTx for the hotplug controller\n");
-				dbg("%s: rc = %x\n", __FUNCTION__, rc);
-			} else 
-				php_ctlr->irq = pdev->irq;
-		}
-
 		rc = request_irq(php_ctlr->irq, pcie_isr, SA_SHIRQ, MY_NAME, (void *) ctrl);
 		dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
 		if (rc) {

drivers/pci/msi.c

@@ -22,7 +22,7 @@
 
 #include "msi.h"
 
-static spinlock_t msi_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(msi_lock);
 static struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
 static kmem_cache_t* msi_cachep;
 
@@ -374,19 +374,18 @@ static int msi_init(void)
 
 	if ((status = msi_cache_init()) < 0) {
 		pci_msi_enable = 0;
-		printk(KERN_INFO "WARNING: MSI INIT FAILURE\n");
+		printk(KERN_WARNING "PCI: MSI cache init failed\n");
 		return status;
 	}
 	last_alloc_vector = assign_irq_vector(AUTO_ASSIGN);
 	if (last_alloc_vector < 0) {
 		pci_msi_enable = 0;
-		printk(KERN_INFO "WARNING: ALL VECTORS ARE BUSY\n");
+		printk(KERN_WARNING "PCI: No interrupt vectors available for MSI\n");
 		status = -EBUSY;
 		return status;
 	}
 	vector_irq[last_alloc_vector] = 0;
 	nr_released_vectors++;
-	printk(KERN_INFO "MSI INIT SUCCESS\n");
 
 	return status;
 }
@@ -736,7 +735,9 @@ int pci_enable_msi(struct pci_dev* dev)
 	/* Check whether driver already requested for MSI-X vectors */
    	if ((pos = pci_find_capability(dev, PCI_CAP_ID_MSIX)) > 0 &&
 		!msi_lookup_vector(dev, PCI_CAP_ID_MSIX)) {
-			printk(KERN_INFO "Can't enable MSI. Device already had MSI-X vectors assigned\n");
+			printk(KERN_INFO "PCI: %s: Can't enable MSI.  "
+			       "Device already has MSI-X vectors assigned\n",
+			       pci_name(dev));
 			dev->irq = temp;
 			return -EINVAL;
 	}
@@ -774,9 +775,9 @@ void pci_disable_msi(struct pci_dev* dev)
 	}
 	if (entry->msi_attrib.state) {
 		spin_unlock_irqrestore(&msi_lock, flags);
-		printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on vector->%d\n",
-		dev->bus->number, PCI_SLOT(dev->devfn),	PCI_FUNC(dev->devfn),
-		dev->irq);
+		printk(KERN_WARNING "PCI: %s: pci_disable_msi() called without "
+		       "free_irq() on MSI vector %d\n",
+		       pci_name(dev), dev->irq);
 		BUG_ON(entry->msi_attrib.state > 0);
 	} else {
 		vector_irq[dev->irq] = 0; /* free it */
@@ -982,7 +983,9 @@ int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
 	/* Check whether driver already requested for MSI vector */
    	if (pci_find_capability(dev, PCI_CAP_ID_MSI) > 0 &&
 		!msi_lookup_vector(dev, PCI_CAP_ID_MSI)) {
-		printk(KERN_INFO "Can't enable MSI-X. Device already had MSI vector assigned\n");
+		printk(KERN_INFO "PCI: %s: Can't enable MSI-X.  "
+		       "Device already has an MSI vector assigned\n",
+		       pci_name(dev));
 		dev->irq = temp;
 		return -EINVAL;
 	}
@@ -1050,9 +1053,9 @@ void pci_disable_msix(struct pci_dev* dev)
 		spin_unlock_irqrestore(&msi_lock, flags);
 		if (warning) {
 			dev->irq = temp;
-			printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on all vectors\n",
-			dev->bus->number, PCI_SLOT(dev->devfn),
-			PCI_FUNC(dev->devfn));
+			printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without "
+			       "free_irq() on all MSI-X vectors\n",
+			       pci_name(dev));
 			BUG_ON(warning > 0);
 		} else {
 			dev->irq = temp;
@@ -1088,9 +1091,9 @@ void msi_remove_pci_irq_vectors(struct pci_dev* dev)
 		state = msi_desc[dev->irq]->msi_attrib.state;
 		spin_unlock_irqrestore(&msi_lock, flags);
 		if (state) {
-			printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on vector->%d\n",
-			dev->bus->number, PCI_SLOT(dev->devfn),
-			PCI_FUNC(dev->devfn), dev->irq);
+			printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
+			       "called without free_irq() on MSI vector %d\n",
+			       pci_name(dev), dev->irq);
 			BUG_ON(state > 0);
 		} else /* Release MSI vector assigned to this device */
 			msi_free_vector(dev, dev->irq, 0);
@@ -1132,9 +1135,9 @@ void msi_remove_pci_irq_vectors(struct pci_dev* dev)
 			iounmap(base);
 			release_mem_region(phys_addr, PCI_MSIX_ENTRY_SIZE *
 				multi_msix_capable(control));
-			printk(KERN_DEBUG "Driver[%d:%d:%d] unloaded wo doing free_irq on all vectors\n",
-				dev->bus->number, PCI_SLOT(dev->devfn),
-				PCI_FUNC(dev->devfn));
+			printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
+			       "called without free_irq() on all MSI-X vectors\n",
+			       pci_name(dev));
 			BUG_ON(warning > 0);
 		}
 		dev->irq = temp;		/* Restore IOAPIC IRQ */

drivers/pci/pci.c

@@ -269,7 +269,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
 	if ((pmc & PCI_PM_CAP_VER_MASK) != 2) {
-		printk(KERN_WARNING
+		printk(KERN_DEBUG
 		       "PCI: %s has unsupported PM cap regs version (%u)\n",
 		       dev->slot_name, pmc & PCI_PM_CAP_VER_MASK);
 		return -EIO;

drivers/pci/pci.h

@@ -59,12 +59,14 @@ struct pci_visit {
 extern int pci_visit_dev(struct pci_visit *fn,
 			 struct pci_dev_wrapped *wrapped_dev,
 			 struct pci_bus_wrapped *wrapped_parent);
+extern void pci_remove_legacy_files(struct pci_bus *bus);
 
 /* Lock for read/write access to pci device and bus lists */
 extern spinlock_t pci_bus_lock;
 
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
+extern struct class_device_attribute class_device_attr_cpuaffinity;
 
 /**
  * pci_match_one_device - Tell if a PCI device structure has a matching

drivers/pci/pcie/Kconfig

+#
+# PCI Express Port Bus Configuration
+#
+config PCIEPORTBUS
+	bool "PCI Express support"
+	depends on PCI_GOMMCONFIG || PCI_GOANY
+	default n
+
+	---help---
+	This automatically enables PCI Express Port Bus support. Users can
+	choose Native Hot-Plug support, Advanced Error Reporting support,
+	Power Management Event support and Virtual Channel support to run
+	on PCI Express Ports (Root or Switch).
+
+#
+# Include service Kconfig here
+#
+config HOTPLUG_PCI_PCIE
+	tristate "PCI Express Hotplug driver"
+	depends on HOTPLUG_PCI && PCIEPORTBUS
+	help
+	  Say Y here if you have a motherboard that supports PCI Express Native
+	  Hotplug
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pciehp.
+
+	  When in doubt, say N.
+
+config HOTPLUG_PCI_PCIE_POLL_EVENT_MODE
+	bool "Use polling mechanism for hot-plug events (for testing purpose)"
+	depends on HOTPLUG_PCI_PCIE
+	help
+	  Say Y here if you want to use the polling mechanism for hot-plug 
+	  events for early platform testing.
+	   
+	  When in doubt, say N.
+

drivers/pci/pcie/Makefile

+#
+# Makefile for PCI-Express PORT Driver
+#
+
+pcieportdrv-y			:= portdrv_core.o portdrv_pci.o portdrv_bus.o
+
+obj-$(CONFIG_PCIEPORTBUS)	+= pcieportdrv.o

drivers/pci/pcie/portdrv.h

+/*
+ * File:	portdrv.h
+ * Purpose:	PCI Express Port Bus Driver's Internal Data Structures
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PORTDRV_H_
+#define _PORTDRV_H_
+
+#if !defined(PCI_CAP_ID_PME)
+#define PCI_CAP_ID_PME			1
+#endif
+
+#if !defined(PCI_CAP_ID_EXP)
+#define PCI_CAP_ID_EXP			0x10
+#endif
+
+#define PORT_TYPE_MASK			0xf
+#define PORT_TO_SLOT_MASK		0x100
+#define SLOT_HP_CAPABLE_MASK		0x40
+#define PCIE_CAPABILITIES_REG		0x2
+#define PCIE_SLOT_CAPABILITIES_REG	0x14
+#define PCIE_PORT_DEVICE_MAXSERVICES	4
+#define PCI_CFG_SPACE_SIZE		256
+
+#define get_descriptor_id(type, service) (((type - 4) << 4) | service)
+
+extern struct bus_type pcie_port_bus_type;
+extern struct device_driver pcieport_generic_driver;
+extern int pcie_port_device_probe(struct pci_dev *dev);
+extern int pcie_port_device_register(struct pci_dev *dev);
+#ifdef CONFIG_PM
+extern int pcie_port_device_suspend(struct pcie_device *dev, u32 state);
+extern int pcie_port_device_resume(struct pcie_device *dev);
+#endif
+extern void pcie_port_device_remove(struct pcie_device *dev);
+extern void pcie_port_bus_register(void);
+extern void pcie_port_bus_unregister(void);
+
+#endif /* _PORTDRV_H_ */

drivers/pci/pcie/portdrv_bus.c

+/*
+ * File:	portdrv_bus.c
+ * Purpose:	PCI Express Port Bus Driver's Bus Overloading Functions
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+
+#include <linux/pcieport_if.h>
+
+static int generic_probe (struct device *dev) {	return 0;}
+static int generic_remove (struct device *dev) { return 0;}
+static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
+static int pcie_port_bus_suspend(struct device *dev, u32 state);
+static int pcie_port_bus_resume(struct device *dev);
+
+struct bus_type pcie_port_bus_type = {
+	.name 		= "pci_express",
+	.match 		= pcie_port_bus_match,
+	.suspend	= pcie_port_bus_suspend,
+	.resume		= pcie_port_bus_resume, 
+};
+
+struct device_driver pcieport_generic_driver = {
+	.name =	"pcieport",
+	.bus = &pcie_port_bus_type,
+	.probe = generic_probe,
+	.remove = generic_remove,
+};
+
+static int pcie_port_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct pcie_device *pciedev;
+	struct pcie_port_service_driver *driver;
+
+	if (	drv->bus != &pcie_port_bus_type || 
+		dev->bus != &pcie_port_bus_type	||
+		drv == &pcieport_generic_driver) {
+		return 0;
+	}
+	pciedev = to_pcie_device(dev);
+	driver = to_service_driver(drv);
+	if (   (driver->id_table->vendor != PCI_ANY_ID && 
+		driver->id_table->vendor != pciedev->id.vendor) ||
+	       (driver->id_table->device != PCI_ANY_ID &&
+		driver->id_table->device != pciedev->id.device) ||	
+		driver->id_table->port_type != pciedev->id.port_type ||
+		driver->id_table->service_type != pciedev->id.service_type )
+		return 0;
+
+	return 1;
+}
+
+static int pcie_port_bus_suspend(struct device *dev, u32 state)
+{
+	struct pcie_device *pciedev;
+	struct pcie_port_service_driver *driver;
+
+	if (!dev || !dev->driver)
+		return 0;
+
+	pciedev = to_pcie_device(dev);
+ 	driver = to_service_driver(dev->driver);
+	if (driver && driver->suspend)
+		driver->suspend(pciedev, state);
+	return 0;
+}
+
+static int pcie_port_bus_resume(struct device *dev)
+{
+	struct pcie_device *pciedev;
+	struct pcie_port_service_driver *driver;
+
+	if (!dev || !dev->driver)
+		return 0;
+
+	pciedev = to_pcie_device(dev);
+ 	driver = to_service_driver(dev->driver);
+	if (driver && driver->resume)
+		driver->resume(pciedev);
+	return 0;
+}

drivers/pci/pcie/portdrv_pci.c

+/*
+ * File:	portdrv_pci.c
+ * Purpose:	PCI Express Port Bus Driver
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/pcieport_if.h>
+
+#include "portdrv.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_AUTHOR "tom.l.nguyen@intel.com"
+#define DRIVER_DESC "PCIE Port Bus Driver"
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/* global data */
+static const char device_name[] = "pcieport-driver";
+
+/*
+ * pcie_portdrv_probe - Probe PCI-Express port devices
+ * @dev: PCI-Express port device being probed
+ *
+ * If detected invokes the pcie_port_device_register() method for 
+ * this port device.
+ *
+ */
+static int __devinit pcie_portdrv_probe (struct pci_dev *dev, 
+				const struct pci_device_id *id )
+{
+	int			status;
+
+	status = pcie_port_device_probe(dev);
+	if (status)
+		return status;
+
+	if (pci_enable_device(dev) < 0) 
+		return -ENODEV;
+	
+	pci_set_master(dev);
+        if (!dev->irq) {
+		printk(KERN_WARNING 
+		"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n", 
+		__FUNCTION__, dev->device, dev->vendor);
+	}
+	if (pcie_port_device_register(dev)) 
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void pcie_portdrv_remove (struct pci_dev *dev)
+{
+	struct pcie_device *pciedev;
+
+      	pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+	if (pciedev) {
+		pcie_port_device_remove(pciedev);
+		pci_set_drvdata(dev, NULL); 
+	}
+}
+
+#ifdef CONFIG_PM
+static int pcie_portdrv_suspend (struct pci_dev *dev, u32 state)
+{
+	struct pcie_device *pciedev;
+	
+      	pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+	if (pciedev) 
+		pcie_port_device_suspend(pciedev, state);
+	return 0;
+}
+
+static int pcie_portdrv_resume (struct pci_dev *dev)
+{
+	struct pcie_device *pciedev;
+	
+      	pciedev = (struct pcie_device *)pci_get_drvdata(dev);
+	if (pciedev) 
+		pcie_port_device_resume(pciedev);
+	return 0;
+}
+#endif
+
+/*
+ * LINUX Device Driver Model
+ */
+static const struct pci_device_id port_pci_ids[] = { {
+	/* handle any PCI-Express port */
+	PCI_DEVICE_CLASS(((PCI_CLASS_BRIDGE_PCI << 8) | 0x00), ~0),
+	}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, port_pci_ids);
+
+static struct pci_driver pcie_portdrv = {
+	.name		= (char *)device_name,
+	.id_table	= &port_pci_ids[0],
+
+	.probe		= pcie_portdrv_probe,
+	.remove		= pcie_portdrv_remove,
+
+#ifdef	CONFIG_PM
+	.suspend	= pcie_portdrv_suspend,
+	.resume		= pcie_portdrv_resume,
+#endif	/* PM */
+};
+
+static int __init pcie_portdrv_init(void)
+{
+	int retval = 0;
+
+	pcie_port_bus_register();
+	retval = pci_module_init(&pcie_portdrv);
+	if (retval)
+		pcie_port_bus_unregister();
+	return retval;
+}
+
+static void __exit pcie_portdrv_exit(void) 
+{
+	pci_unregister_driver(&pcie_portdrv);
+	pcie_port_bus_unregister();
+}
+
+module_init(pcie_portdrv_init);
+module_exit(pcie_portdrv_exit);

drivers/pci/probe.c

@@ -62,7 +62,7 @@ static void pci_create_legacy_files(struct pci_bus *b)
 	}
 }
 
-static void pci_remove_legacy_files(struct pci_bus *b)
+void pci_remove_legacy_files(struct pci_bus *b)
 {
 	class_device_remove_bin_file(&b->class_dev, b->legacy_io);
 	class_device_remove_bin_file(&b->class_dev, b->legacy_mem);
@@ -70,7 +70,7 @@ static void pci_remove_legacy_files(struct pci_bus *b)
 }
 #else /* !HAVE_PCI_LEGACY */
 static inline void pci_create_legacy_files(struct pci_bus *bus) { return; }
-static inline void pci_remove_legacy_files(struct pci_bus *bus) { return; }
+void pci_remove_legacy_files(struct pci_bus *bus) { return; }
 #endif /* HAVE_PCI_LEGACY */
 
 /*
@@ -86,7 +86,7 @@ static ssize_t pci_bus_show_cpuaffinity(struct class_device *class_dev, char *bu
 		buf[ret++] = '\n';
 	return ret;
 }
-static CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
+CLASS_DEVICE_ATTR(cpuaffinity, S_IRUGO, pci_bus_show_cpuaffinity, NULL);
 
 /*
  * PCI Bus Class
@@ -95,10 +95,6 @@ static void release_pcibus_dev(struct class_device *class_dev)
 {
 	struct pci_bus *pci_bus = to_pci_bus(class_dev);
 
-	pci_remove_legacy_files(pci_bus);
-	class_device_remove_file(&pci_bus->class_dev,
-				 &class_device_attr_cpuaffinity);
-	sysfs_remove_link(&pci_bus->class_dev.kobj, "bridge");
 	if (pci_bus->bridge)
 		put_device(pci_bus->bridge);
 	kfree(pci_bus);

drivers/pci/remove.c

@@ -61,15 +61,18 @@ int pci_remove_device_safe(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(pci_remove_device_safe);
 
-void pci_remove_bus(struct pci_bus *b)
+void pci_remove_bus(struct pci_bus *pci_bus)
 {
-	pci_proc_detach_bus(b);
+	pci_proc_detach_bus(pci_bus);
 
 	spin_lock(&pci_bus_lock);
-	list_del(&b->node);
+	list_del(&pci_bus->node);
 	spin_unlock(&pci_bus_lock);
-
-	class_device_unregister(&b->class_dev);
+	pci_remove_legacy_files(pci_bus);
+	class_device_remove_file(&pci_bus->class_dev,
+		&class_device_attr_cpuaffinity);
+	sysfs_remove_link(&pci_bus->class_dev.kobj, "bridge");
+	class_device_unregister(&pci_bus->class_dev);
 }
 EXPORT_SYMBOL(pci_remove_bus);
 

drivers/pci/rom.c

@@ -5,10 +5,7 @@
  * (C) Copyright 2004 Silicon Graphics, Inc. Jesse Barnes <jbarnes@sgi.com>
  *
  * PCI ROM access routines
- *
  */
-
-
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -24,11 +21,10 @@
  * between the ROM and other resources, so enabling it may disable access
  * to MMIO registers or other card memory.
  */
-static void
-pci_enable_rom(struct pci_dev *pdev)
+static void pci_enable_rom(struct pci_dev *pdev)
 {
 	u32 rom_addr;
-	
+
 	pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
 	rom_addr |= PCI_ROM_ADDRESS_ENABLE;
 	pci_write_config_dword(pdev, pdev->rom_base_reg, rom_addr);
@@ -41,8 +37,7 @@ pci_enable_rom(struct pci_dev *pdev)
  * Disable ROM decoding on a PCI device by turning off the last bit in the
  * ROM BAR.
  */
-static void
-pci_disable_rom(struct pci_dev *pdev)
+static void pci_disable_rom(struct pci_dev *pdev)
 {
 	u32 rom_addr;
 	pci_read_config_dword(pdev, pdev->rom_base_reg, &rom_addr);
@@ -57,7 +52,7 @@ pci_disable_rom(struct pci_dev *pdev)
  * @return: kernel virtual pointer to image of ROM
  *
  * Map a PCI ROM into kernel space. If ROM is boot video ROM,
- * the shadow BIOS copy will be returned instead of the 
+ * the shadow BIOS copy will be returned instead of the
  * actual ROM.
  */
 void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
@@ -67,10 +62,12 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 	void __iomem *rom;
 	void __iomem *image;
 	int last_image;
-	
-	if (res->flags & IORESOURCE_ROM_SHADOW) {	/* IORESOURCE_ROM_SHADOW only set on x86 */
-		start = (loff_t)0xC0000; 	/* primary video rom always starts here */
-		*size = 0x20000;		/* cover C000:0 through E000:0 */
+
+	/* IORESOURCE_ROM_SHADOW only set on x86 */
+	if (res->flags & IORESOURCE_ROM_SHADOW) {
+		/* primary video rom always starts here */
+		start = (loff_t)0xC0000;
+		*size = 0x20000; /* cover C000:0 through E000:0 */
 	} else {
 		if (res->flags & IORESOURCE_ROM_COPY) {
 			*size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
@@ -79,28 +76,32 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
 			/* assign the ROM an address if it doesn't have one */
 			if (res->parent == NULL)
 				pci_assign_resource(pdev, PCI_ROM_RESOURCE);
-	
+
 			start = pci_resource_start(pdev, PCI_ROM_RESOURCE);
 			*size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
 			if (*size == 0)
 				return NULL;
-			
+
 			/* Enable ROM space decodes */
 			pci_enable_rom(pdev);
 		}
 	}
-	
+
 	rom = ioremap(start, *size);
 	if (!rom) {
 		/* restore enable if ioremap fails */
-		if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW | IORESOURCE_ROM_COPY)))
+		if (!(res->flags & (IORESOURCE_ROM_ENABLE |
+				    IORESOURCE_ROM_SHADOW |
+				    IORESOURCE_ROM_COPY)))
 			pci_disable_rom(pdev);
 		return NULL;
-	}		
+	}
 
-	/* Try to find the true size of the ROM since sometimes the PCI window */
-	/* size is much larger than the actual size of the ROM. */
-	/* True size is important if the ROM is going to be copied. */
+	/*
+	 * Try to find the true size of the ROM since sometimes the PCI window
+	 * size is much larger than the actual size of the ROM.
+	 * True size is important if the ROM is going to be copied.
+	 */
 	image = rom;
 	do {
 		void __iomem *pds;
@@ -136,30 +137,30 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
  * @return: kernel virtual pointer to image of ROM
  *
  * Map a PCI ROM into kernel space. If ROM is boot video ROM,
- * the shadow BIOS copy will be returned instead of the 
+ * the shadow BIOS copy will be returned instead of the
  * actual ROM.
  */
 void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size)
 {
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
 	void __iomem *rom;
-	
+
 	rom = pci_map_rom(pdev, size);
 	if (!rom)
 		return NULL;
-		
+
 	if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW))
 		return rom;
-		
+
 	res->start = (unsigned long)kmalloc(*size, GFP_KERNEL);
-	if (!res->start) 
+	if (!res->start)
 		return rom;
 
-	res->end = res->start + *size; 
+	res->end = res->start + *size;
 	memcpy_fromio((void*)res->start, rom, *size);
 	pci_unmap_rom(pdev, rom);
 	res->flags |= IORESOURCE_ROM_COPY;
-	
+
 	return (void __iomem *)res->start;
 }
 
@@ -170,16 +171,15 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size)
  *
  * Remove a mapping of a previously mapped ROM
  */
-void 
-pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
+void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
 {
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
 
 	if (res->flags & IORESOURCE_ROM_COPY)
 		return;
-		
+
 	iounmap(rom);
-		
+
 	/* Disable again before continuing, leave enabled if pci=rom */
 	if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW)))
 		pci_disable_rom(pdev);
@@ -189,26 +189,28 @@ pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
  * pci_remove_rom - disable the ROM and remove its sysfs attribute
  * @dev: pointer to pci device struct
  *
+ * Remove the rom file in sysfs and disable ROM decoding.
  */
-void 
-pci_remove_rom(struct pci_dev *pdev) 
+void pci_remove_rom(struct pci_dev *pdev)
 {
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
-	
+
 	if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
 		sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
-	if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW | IORESOURCE_ROM_COPY)))
+	if (!(res->flags & (IORESOURCE_ROM_ENABLE |
+			    IORESOURCE_ROM_SHADOW |
+			    IORESOURCE_ROM_COPY)))
 		pci_disable_rom(pdev);
 }
 
 /**
- * pci_cleanup_rom - internal routine for freeing the ROM copy created 
+ * pci_cleanup_rom - internal routine for freeing the ROM copy created
  * by pci_map_rom_copy called from remove.c
  * @dev: pointer to pci device struct
  *
+ * Free the copied ROM if we allocated one.
  */
-void 
-pci_cleanup_rom(struct pci_dev *pdev) 
+void pci_cleanup_rom(struct pci_dev *pdev)
 {
 	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
 	if (res->flags & IORESOURCE_ROM_COPY) {

drivers/pci/search.c

@@ -13,7 +13,7 @@
 #include <linux/interrupt.h>
 #include "pci.h"
 
-spinlock_t pci_bus_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_SPINLOCK(pci_bus_lock);
 
 static struct pci_bus * __devinit
 pci_do_find_bus(struct pci_bus* bus, unsigned char busnr)

include/linux/pci_ids.h

@@ -2246,7 +2246,7 @@
 #define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
 #define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
 #define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
-#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b0
+#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
 #define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b1
 #define PCI_DEVICE_ID_INTEL_ICH7_2	0x27c0
 #define PCI_DEVICE_ID_INTEL_ICH7_3	0x27c1

include/linux/pcieport_if.h

+/*
+ * File:	pcieport_if.h
+ * Purpose:	PCI Express Port Bus Driver's IF Data Structure
+ *
+ * Copyright (C) 2004 Intel
+ * Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
+ */
+
+#ifndef _PCIEPORT_IF_H_
+#define _PCIEPORT_IF_H_
+
+/* Port Type */
+#define PCIE_RC_PORT			4	/* Root port of RC */
+#define PCIE_SW_UPSTREAM_PORT		5	/* Upstream port of Switch */
+#define PCIE_SW_DOWNSTREAM_PORT		6	/* Downstream port of Switch */
+#define PCIE_ANY_PORT			7
+
+/* Service Type */
+#define PCIE_PORT_SERVICE_PME		1	/* Power Management Event */
+#define PCIE_PORT_SERVICE_AER		2	/* Advanced Error Reporting */
+#define PCIE_PORT_SERVICE_HP		4	/* Native Hotplug */
+#define PCIE_PORT_SERVICE_VC		8	/* Virtual Channel */
+
+/* Root/Upstream/Downstream Port's Interrupt Mode */
+#define PCIE_PORT_INTx_MODE		0
+#define PCIE_PORT_MSI_MODE		1
+#define PCIE_PORT_MSIX_MODE		2
+
+struct pcie_port_service_id {
+	__u32 vendor, device;		/* Vendor and device ID or PCI_ANY_ID*/
+	__u32 subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
+	__u32 class, class_mask;	/* (class,subclass,prog-if) triplet */
+	__u32 port_type, service_type;	/* Port Entity */
+	kernel_ulong_t driver_data;
+};
+
+struct pcie_device {
+	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
+	int 		interrupt_mode;	/* [0:INTx | 1:MSI | 2:MSI-X] */	
+	struct pcie_port_service_id id;	/* Service ID */
+	struct pci_dev	*port;	    /* Root/Upstream/Downstream Port */
+	void		*priv_data; /* Service Private Data */
+	struct device	device;     /* Generic Device Interface */
+};
+#define to_pcie_device(d) container_of(d, struct pcie_device, device)
+
+static inline void set_service_data(struct pcie_device *dev, void *data)
+{
+	dev->priv_data = data;
+}
+
+static inline void* get_service_data(struct pcie_device *dev)
+{
+	return dev->priv_data;
+}
+
+struct pcie_port_service_driver {
+	const char *name;
+	int (*probe) (struct pcie_device *dev, 
+		const struct pcie_port_service_id *id);
+	void (*remove) (struct pcie_device *dev);
+	int (*suspend) (struct pcie_device *dev, u32 state);
+	int (*resume) (struct pcie_device *dev);
+
+	const struct pcie_port_service_id *id_table;
+	struct device_driver driver;
+};
+#define to_service_driver(d) \
+	container_of(d, struct pcie_port_service_driver, driver)
+
+extern int pcie_port_service_register(struct pcie_port_service_driver *new);
+extern void pcie_port_service_unregister(struct pcie_port_service_driver *new);
+
+#endif /* _PCIEPORT_IF_H_ */