Commit 8c5f5f7c authored by Eugeni Dodonov's avatar Eugeni Dodonov Committed by Daniel Vetter

drm/i915: add new Haswell DIP controls registers

Haswell has different DIP control registers and offsets which we need to
use for infoframes, which this patch adds.

Note that this does not adds full DIP frames support, but only the basic
functionality necessary for HDMI to work in early enablement.

v2: replace infoframe handling with a debug message, proper support will
be added via a patch from Paulo Zanoni later.
Signed-off-by: default avatarEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: default avatarPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 1833b134
......@@ -3524,6 +3524,42 @@
#define VLV_TVIDEO_DIP_GCP(pipe) \
_PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B)
/* Haswell DIP controls */
#define HSW_VIDEO_DIP_CTL_A 0x60200
#define HSW_VIDEO_DIP_AVI_DATA_A 0x60220
#define HSW_VIDEO_DIP_VS_DATA_A 0x60260
#define HSW_VIDEO_DIP_SPD_DATA_A 0x602A0
#define HSW_VIDEO_DIP_GMP_DATA_A 0x602E0
#define HSW_VIDEO_DIP_VSC_DATA_A 0x60320
#define HSW_VIDEO_DIP_AVI_ECC_A 0x60240
#define HSW_VIDEO_DIP_VS_ECC_A 0x60280
#define HSW_VIDEO_DIP_SPD_ECC_A 0x602C0
#define HSW_VIDEO_DIP_GMP_ECC_A 0x60300
#define HSW_VIDEO_DIP_VSC_ECC_A 0x60344
#define HSW_VIDEO_DIP_GCP_A 0x60210
#define HSW_VIDEO_DIP_CTL_B 0x61200
#define HSW_VIDEO_DIP_AVI_DATA_B 0x61220
#define HSW_VIDEO_DIP_VS_DATA_B 0x61260
#define HSW_VIDEO_DIP_SPD_DATA_B 0x612A0
#define HSW_VIDEO_DIP_GMP_DATA_B 0x612E0
#define HSW_VIDEO_DIP_VSC_DATA_B 0x61320
#define HSW_VIDEO_DIP_BVI_ECC_B 0x61240
#define HSW_VIDEO_DIP_VS_ECC_B 0x61280
#define HSW_VIDEO_DIP_SPD_ECC_B 0x612C0
#define HSW_VIDEO_DIP_GMP_ECC_B 0x61300
#define HSW_VIDEO_DIP_VSC_ECC_B 0x61344
#define HSW_VIDEO_DIP_GCP_B 0x61210
#define HSW_TVIDEO_DIP_CTL(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
#define HSW_TVIDEO_DIP_GCP(pipe) \
_PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
#define _TRANS_HTOTAL_B 0xe1000
#define _TRANS_HBLANK_B 0xe1004
#define _TRANS_HSYNC_B 0xe1008
......
......@@ -277,6 +277,18 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
I915_WRITE(reg, val);
}
static void hsw_write_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
/* Not implemented yet, so avoid doing anything at all.
* This is the placeholder for Paulo Zanoni's infoframe writing patch
*/
DRM_DEBUG_DRIVER("Attempting to write infoframe on Haswell, this is not implemented yet.\n");
return;
}
static void intel_set_infoframe(struct drm_encoder *encoder,
struct dip_infoframe *frame)
{
......@@ -660,6 +672,13 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg)
intel_hdmi->write_infoframe = vlv_write_infoframe;
for_each_pipe(i)
I915_WRITE(VLV_TVIDEO_DIP_CTL(i), 0);
} else if (IS_HASWELL(dev)) {
/* FIXME: Haswell has a new set of DIP frame registers, but we are
* just doing the minimal required for HDMI to work at this stage.
*/
intel_hdmi->write_infoframe = hsw_write_infoframe;
for_each_pipe(i)
I915_WRITE(HSW_TVIDEO_DIP_CTL(i), 0);
} else if (HAS_PCH_IBX(dev)) {
intel_hdmi->write_infoframe = ibx_write_infoframe;
for_each_pipe(i)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment