regulator: da9211: Add gpio control for enable/disable of buck

This is a patch for adding gpio control about enable/disable of buck.
Signed-off-by: James Ban <james.ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/regulator/da9211.txt

@@ -11,6 +11,7 @@ Required properties:
   BUCKA and BUCKB.
 
 Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
 - Any optional property defined in regulator.txt
 
 Example 1) DA9211
@@ -27,6 +28,7 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@@ -34,11 +36,12 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 17 0>;
 			};
 		};
 	};
 
-Example 2) DA92113
+Example 2) DA9213
 	pmic: da9213@68 {
 		compatible = "dlg,da9213";
 		reg = <0x68>;
@@ -51,6 +54,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@@ -58,6 +62,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
 			};
 		};
 	};

drivers/regulator/da9211-regulator.c

@@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/of_gpio.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
 #include "da9211-regulator.h"
@@ -277,6 +278,9 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 
 		pdata->init_data[n] = da9211_matches[i].init_data;
 		pdata->reg_node[n] = da9211_matches[i].of_node;
+		pdata->gpio_ren[n] =
+			of_get_named_gpio(da9211_matches[i].of_node,
+				"enable-gpios", 0);
 		n++;
 	}
 
@@ -366,6 +370,14 @@ static int da9211_regulator_init(struct da9211 *chip)
 		config.regmap = chip->regmap;
 		config.of_node = chip->pdata->reg_node[i];
 
+		if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
+			config.ena_gpio = chip->pdata->gpio_ren[i];
+			config.ena_gpio_initialized = true;
+		} else {
+			config.ena_gpio = -EINVAL;
+			config.ena_gpio_initialized = false;
+		}
+
 		chip->rdev[i] = devm_regulator_register(chip->dev,
 			&da9211_regulators[i], &config);
 		if (IS_ERR(chip->rdev[i])) {

include/linux/regulator/da9211.h

@@ -32,6 +32,7 @@ struct da9211_pdata {
 	 * 2 : 2 phase 2 buck
 	 */
 	int num_buck;
+	int gpio_ren[DA9211_MAX_REGULATORS];
 	struct device_node *reg_node[DA9211_MAX_REGULATORS];
 	struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
 };