Commit 8c8fdc68 authored by Dhinakaran Pandiyan's avatar Dhinakaran Pandiyan Committed by Greg Kroah-Hartman

drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms

commit 61e0c543 upstream.

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.

v2: Move drm_device to drm_i915_private conversion

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: default avatarDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9c754024)
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent db8e005b
......@@ -9740,8 +9740,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state)
static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state,
int pixel_rate)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
/* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
if (crtc_state->ips_enabled)
if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled)
pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95);
/* BSpec says "Do not use DisplayPort with CDCLK less than
......@@ -9783,7 +9785,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state)
pixel_rate = ilk_pipe_pixel_rate(crtc_state);
if (IS_BROADWELL(dev_priv))
if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv))
pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state,
pixel_rate);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment