Commit 8ca8ac10 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Sylwester Nawrocki

clk: samsung: Add dt bindings for Exynos4412 ISP clock controller

Some registers for the Exynos 4412 ISP (Camera subsystem) clocks are
located in the ISP power domain. Because those registers are also
located in a different memory region than the main clock controller,
support for them can be provided by a separate clock controller.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
parent 75920aac
......@@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP)
subsystem. Registers for those clocks are located in the ISP power domain.
Because those registers are also located in a different memory region than
the main clock controller, a separate clock controller has to be defined for
handling them.
Required Properties:
- compatible: should be "samsung,exynos4412-isp-clock".
- reg: physical base address of the ISP clock controller and length of memory
mapped region.
- #clock-cells: should be 1.
- clocks: list of the clock controller input clock identifiers,
from common clock bindings, should point to CLK_ACLK200 and
CLK_ACLK400_MCUISP clocks from the main clock controller.
- clock-names: list of the clock controller input clock names,
as described in clock-bindings.txt, should be "aclk200" and
"aclk400_mcuisp".
- power-domains: a phandle to ISP power domain node as described by
generic PM domain bindings.
Example 3: The clock controllers bindings for Exynos4412 SoCs.
clock: clock-controller@10030000 {
compatible = "samsung,exynos4412-clock";
reg = <0x10030000 0x18000>;
#clock-cells = <1>;
};
isp_clock: clock-controller@10048000 {
compatible = "samsung,exynos4412-isp-clock";
reg = <0x10048000 0x1000>;
#clock-cells = <1>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
clock-names = "aclk200", "aclk400_mcuisp";
};
......@@ -272,4 +272,39 @@
/* must be greater than maximal clock id */
#define CLK_NR_CLKS 461
/* Exynos4x12 ISP clocks */
#define CLK_ISP_FIMC_ISP 1
#define CLK_ISP_FIMC_DRC 2
#define CLK_ISP_FIMC_FD 3
#define CLK_ISP_FIMC_LITE0 4
#define CLK_ISP_FIMC_LITE1 5
#define CLK_ISP_MCUISP 6
#define CLK_ISP_GICISP 7
#define CLK_ISP_SMMU_ISP 8
#define CLK_ISP_SMMU_DRC 9
#define CLK_ISP_SMMU_FD 10
#define CLK_ISP_SMMU_LITE0 11
#define CLK_ISP_SMMU_LITE1 12
#define CLK_ISP_PPMUISPMX 13
#define CLK_ISP_PPMUISPX 14
#define CLK_ISP_MCUCTL_ISP 15
#define CLK_ISP_MPWM_ISP 16
#define CLK_ISP_I2C0_ISP 17
#define CLK_ISP_I2C1_ISP 18
#define CLK_ISP_MTCADC_ISP 19
#define CLK_ISP_PWM_ISP 20
#define CLK_ISP_WDT_ISP 21
#define CLK_ISP_UART_ISP 22
#define CLK_ISP_ASYNCAXIM 23
#define CLK_ISP_SMMU_ISPCX 24
#define CLK_ISP_SPI0_ISP 25
#define CLK_ISP_SPI1_ISP 26
#define CLK_ISP_DIV_ISP0 27
#define CLK_ISP_DIV_ISP1 28
#define CLK_ISP_DIV_MCUISP0 29
#define CLK_ISP_DIV_MCUISP1 30
#define CLK_NR_ISP_CLKS 31
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_4_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment