[PATCH] crc16 kconfig touchups

drivers/net/hamradio/Kconfig:116:warning: 'select' used by config symbol 'BAYCOM_SER_FDX' refer to undefined symbol 'CRC16'
drivers/net/hamradio/Kconfig:136:warning: 'select' used by config symbol 'BAYCOM_SER_HDX' refer to undefined symbol 'CRC16'
drivers/net/hamradio/Kconfig:154:warning: 'select' used by config symbol 'BAYCOM_PAR' refer to undefined symbol 'CRC16'
drivers/net/hamradio/Kconfig:169:warning: 'select' used by config symbol 'BAYCOM_EPP' refer to undefined symbol 'CRC16'
net/irda/Kconfig:8:warning: 'select' used by config symbol 'IRDA' refer to undefined symbol 'CRC16'
drivers/net/Kconfig:1749:warning: 'select' used by config symbol 'VIA_VELOCITY' refer to undefined symbol 'CRC16'
drivers/net/Kconfig:2465:warning: 'select' used by config symbol 'PPP_ASYNC' refer to undefined symbol 'CRC16'
drivers/isdn/hisax/Kconfig:403:warning: 'select' used by config symbol 'HISAX_ST5481' refer to undefined symbol 'CRC16'
drivers/isdn/hisax/Kconfig:7:warning: 'select' used by config symbol 'ISDN_DRV_HISAX' refer to undefined symbol 'CRC16'
drivers/isdn/tpam/Kconfig:7:warning: 'select' used by config symbol 'ISDN_DRV_TPAM' refer to undefined symbol 'CRC16'
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/isdn/hisax/Kconfig

@@ -4,7 +4,7 @@ menu "Passive cards"
 
 config ISDN_DRV_HISAX
 	tristate "HiSax SiemensChipSet driver support"
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  This is a driver supporting the Siemens chipset on various
 	  ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
@@ -400,7 +400,7 @@ comment "HiSax sub driver modules"
 config HISAX_ST5481
 	tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
 	depends on USB && EXPERIMENTAL
-	select CRC16
+	select CRC_CCITT
 	help
 	  This enables the driver for ST5481 based USB ISDN adapters,
 	  e.g. the BeWan Gazel 128 USB

drivers/isdn/tpam/Kconfig

@@ -4,7 +4,7 @@
 config ISDN_DRV_TPAM
 	tristate "Auvertech TurboPAM support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ISDN_I4L && PCI
-	select CRC16
+	select CRC_CCITT
 	help
 	  This enables support for the Auvertech TurboPAM ISDN-card.
 	  For running this card, additional firmware is necessary, which has

drivers/net/Kconfig

@@ -2405,7 +2405,7 @@ config PPP_FILTER
 config PPP_ASYNC
 	tristate "PPP support for async serial ports"
 	depends on PPP
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  Say Y (or M) here if you want to be able to use PPP over standard
 	  asynchronous serial ports, such as COM1 or COM2 on a PC.  If you use

drivers/net/hamradio/Kconfig

@@ -113,7 +113,7 @@ config SCC_TRXECHO
 config BAYCOM_SER_FDX
 	tristate "BAYCOM ser12 fullduplex driver for AX.25"
 	depends on AX25
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
 	  modems that connect to a serial interface. The driver supports the
@@ -133,7 +133,7 @@ config BAYCOM_SER_FDX
 config BAYCOM_SER_HDX
 	tristate "BAYCOM ser12 halfduplex driver for AX.25"
 	depends on AX25
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  This is one of two drivers for Baycom style simple amateur radio
 	  modems that connect to a serial interface. The driver supports the
@@ -151,7 +151,7 @@ config BAYCOM_SER_HDX
 config BAYCOM_PAR
 	tristate "BAYCOM picpar and par96 driver for AX.25"
 	depends on PARPORT && AX25
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  This is a driver for Baycom style simple amateur radio modems that
 	  connect to a parallel interface. The driver supports the picpar and
@@ -166,7 +166,7 @@ config BAYCOM_PAR
 config BAYCOM_EPP
 	tristate "BAYCOM epp driver for AX.25"
 	depends on PARPORT && AX25 && !64BIT
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  This is a driver for Baycom style simple amateur radio modems that
 	  connect to a parallel interface. The driver supports the EPP

net/irda/Kconfig

@@ -5,7 +5,7 @@
 menuconfig IRDA
 	depends on NET
 	tristate "IrDA (infrared) subsystem support"
-	select CRC16
+	select CRC_CCITT
 	---help---
 	  Say Y here if you want to build support for the IrDA (TM) protocols.
 	  The Infrared Data Associations (tm) specifies standards for wireless