Commit 8d04631a authored by Nicholas Piggin's avatar Nicholas Piggin Committed by Michael Ellerman

powerpc/64s: Consolidate Instruction Segment 0x480 interrupt

Signed-off-by: default avatarNicholas Piggin <npiggin@gmail.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 27ce77df
......@@ -629,6 +629,119 @@ EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500)
#endif
EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x4500)
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXSLB)
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
mfspr r12,SPRN_SRR1
crclr 4*cr6+eq
#ifndef CONFIG_RELOCATABLE
b slb_miss_realmode
#else
mfctr r11
LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
EXC_VIRT_END(instruction_access_slb, 0x4480, 0x4500)
TRAMP_KVM(PACA_EXSLB, 0x480)
/* This handler is used by both 0x380 and 0x480 slb miss interrupts */
EXC_COMMON_BEGIN(slb_miss_realmode)
/*
* r13 points to the PACA, r9 contains the saved CR,
* r12 contain the saved SRR1, SRR0 is still ready for return
* r3 has the faulting address
* r9 - r13 are saved in paca->exslb.
* r3 is saved in paca->slb_r3
* cr6.eq is set for a D-SLB miss, clear for a I-SLB miss
* We assume we aren't going to take any exceptions during this
* procedure.
*/
mflr r10
#ifdef CONFIG_RELOCATABLE
mtctr r11
#endif
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
std r3,PACA_EXSLB+EX_DAR(r13)
crset 4*cr0+eq
#ifdef CONFIG_PPC_STD_MMU_64
BEGIN_MMU_FTR_SECTION
bl slb_allocate_realmode
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
#endif
ld r10,PACA_EXSLB+EX_LR(r13)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
mtlr r10
beq 8f /* if bad address, make full stack frame */
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
beq- 2f
/* All done -- return from exception. */
.machine push
.machine "power4"
mtcrf 0x80,r9
mtcrf 0x02,r9 /* I/D indication is in cr6 */
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
.machine pop
RESTORE_PPR_PACA(PACA_EXSLB, r9)
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
b . /* prevent speculative execution */
2: mfspr r11,SPRN_SRR0
LOAD_HANDLER(r10,unrecov_slb)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b .
8: mfspr r11,SPRN_SRR0
LOAD_HANDLER(r10,bad_addr_slb)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b .
EXC_COMMON_BEGIN(unrecov_slb)
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
RECONCILE_IRQ_STATE(r10, r11)
bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
b 1b
EXC_COMMON_BEGIN(bad_addr_slb)
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB)
RECONCILE_IRQ_STATE(r10, r11)
ld r3, PACA_EXSLB+EX_DAR(r13)
std r3, _DAR(r1)
beq cr6, 2f
li r10, 0x480 /* fix trap number for I-SLB miss */
std r10, _TRAP(r1)
2: bl save_nvgprs
addi r3, r1, STACK_FRAME_OVERHEAD
bl slb_miss_bad_addr
b ret_from_except
EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600)
.globl hardware_interrupt_hv;
hardware_interrupt_hv:
......@@ -790,7 +903,6 @@ EXC_REAL_NONE(0x1800, 0x1900)
/*** Out of line interrupts support ***/
/* moved from 0x200 */
TRAMP_KVM(PACA_EXSLB, 0x480)
TRAMP_KVM(PACA_EXGEN, 0x900)
TRAMP_KVM_HV(PACA_EXGEN, 0x980)
......@@ -1057,24 +1169,6 @@ EXC_COMMON(altivec_assist_common, 0x1700, unknown_exception)
* come here.
*/
EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x4500)
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXSLB)
EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
std r3,PACA_EXSLB+EX_R3(r13)
mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */
mfspr r12,SPRN_SRR1
crclr 4*cr6+eq
#ifndef CONFIG_RELOCATABLE
b slb_miss_realmode
#else
mfctr r11
LOAD_HANDLER(r10, slb_miss_realmode)
mtctr r10
bctr
#endif
EXC_VIRT_END(instruction_access_slb, 0x4480, 0x4500)
EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x4600)
.globl hardware_interrupt_relon_hv;
hardware_interrupt_relon_hv:
......@@ -1370,98 +1464,6 @@ hmi_exception_after_realmode:
EXCEPTION_PROLOG_0(PACA_EXGEN)
b tramp_real_hmi_exception
/*
* r13 points to the PACA, r9 contains the saved CR,
* r12 contain the saved SRR1, SRR0 is still ready for return
* r3 has the faulting address
* r9 - r13 are saved in paca->exslb.
* r3 is saved in paca->slb_r3
* cr6.eq is set for a D-SLB miss, clear for a I-SLB miss
* We assume we aren't going to take any exceptions during this procedure.
*/
EXC_COMMON_BEGIN(slb_miss_realmode)
mflr r10
#ifdef CONFIG_RELOCATABLE
mtctr r11
#endif
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
std r3,PACA_EXSLB+EX_DAR(r13)
crset 4*cr0+eq
#ifdef CONFIG_PPC_STD_MMU_64
BEGIN_MMU_FTR_SECTION
bl slb_allocate_realmode
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX)
#endif
ld r10,PACA_EXSLB+EX_LR(r13)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
mtlr r10
beq 8f /* if bad address, make full stack frame */
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
beq- 2f
/* All done -- return from exception. */
.machine push
.machine "power4"
mtcrf 0x80,r9
mtcrf 0x02,r9 /* I/D indication is in cr6 */
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
.machine pop
RESTORE_PPR_PACA(PACA_EXSLB, r9)
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
ld r12,PACA_EXSLB+EX_R12(r13)
ld r13,PACA_EXSLB+EX_R13(r13)
rfid
b . /* prevent speculative execution */
2: mfspr r11,SPRN_SRR0
LOAD_HANDLER(r10,unrecov_slb)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b .
8: mfspr r11,SPRN_SRR0
LOAD_HANDLER(r10,bad_addr_slb)
mtspr SPRN_SRR0,r10
ld r10,PACAKMSR(r13)
mtspr SPRN_SRR1,r10
rfid
b .
EXC_COMMON_BEGIN(unrecov_slb)
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
RECONCILE_IRQ_STATE(r10, r11)
bl save_nvgprs
1: addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
b 1b
EXC_COMMON_BEGIN(bad_addr_slb)
EXCEPTION_PROLOG_COMMON(0x380, PACA_EXSLB)
RECONCILE_IRQ_STATE(r10, r11)
ld r3, PACA_EXSLB+EX_DAR(r13)
std r3, _DAR(r1)
beq cr6, 2f
li r10, 0x480 /* fix trap number for I-SLB miss */
std r10, _TRAP(r1)
2: bl save_nvgprs
addi r3, r1, STACK_FRAME_OVERHEAD
bl slb_miss_bad_addr
b ret_from_except
#ifdef CONFIG_PPC_970_NAP
TRAMP_REAL_BEGIN(power4_fixup_nap)
andc r9,r9,r10
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment