MIPS: IP27: Fix build errors with CONFIG_PCI disabled.

  LD      init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/sgi-ip27/Makefile

@@ -7,4 +7,5 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
+obj-$(CONFIG_PCI)		+= ip27-irq-pci.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o

arch/mips/sgi-ip27/ip27-irq-pci.c

+/*
+ * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
+ *
+ * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 1999 - 2001 Kanoj Sarcar
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/random.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+
+#include <asm/processor.h>
+#include <asm/pci/bridge.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/agent.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/hub.h>
+#include <asm/sn/intr.h>
+
+/*
+ * Linux has a controller-independent x86 interrupt architecture.
+ * every controller has a 'controller-template', that is used
+ * by the main code to do the right thing. Each driver-visible
+ * interrupt source is transparently wired to the appropriate
+ * controller. Thus drivers need not be aware of the
+ * interrupt-controller.
+ *
+ * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
+ * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
+ * (IO-APICs assumed to be messaging to Pentium local-APICs)
+ *
+ * the code is designed to be easily extended with new/different
+ * interrupt controllers, without having to do assembly magic.
+ */
+
+extern struct bridge_controller *irq_to_bridge[];
+extern int irq_to_slot[];
+
+/*
+ * use these macros to get the encoded nasid and widget id
+ * from the irq value
+ */
+#define IRQ_TO_BRIDGE(i)		irq_to_bridge[(i)]
+#define SLOT_FROM_PCI_IRQ(i)		irq_to_slot[i]
+
+static inline int alloc_level(int cpu, int irq)
+{
+	struct hub_data *hub = hub_data(cpu_to_node(cpu));
+	struct slice_data *si = cpu_data[cpu].data;
+	int level;
+
+	level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
+	if (level >= LEVELS_PER_SLICE)
+		panic("Cpu %d flooded with devices", cpu);
+
+	__set_bit(level, hub->irq_alloc_mask);
+	si->level_to_irq[level] = irq;
+
+	return level;
+}
+
+static inline int find_level(cpuid_t *cpunum, int irq)
+{
+	int cpu, i;
+
+	for_each_online_cpu(cpu) {
+		struct slice_data *si = cpu_data[cpu].data;
+
+		for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
+			if (si->level_to_irq[i] == irq) {
+				*cpunum = cpu;
+
+				return i;
+			}
+	}
+
+	panic("Could not identify cpu/level for irq %d", irq);
+}
+
+static int intr_connect_level(int cpu, int bit)
+{
+	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	struct slice_data *si = cpu_data[cpu].data;
+
+	set_bit(bit, si->irq_enable_mask);
+
+	if (!cputoslice(cpu)) {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+	} else {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+	}
+
+	return 0;
+}
+
+static int intr_disconnect_level(int cpu, int bit)
+{
+	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	struct slice_data *si = cpu_data[cpu].data;
+
+	clear_bit(bit, si->irq_enable_mask);
+
+	if (!cputoslice(cpu)) {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
+	} else {
+		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
+		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
+	}
+
+	return 0;
+}
+
+/* Startup one of the (PCI ...) IRQs routes over a bridge.  */
+static unsigned int startup_bridge_irq(struct irq_data *d)
+{
+	struct bridge_controller *bc;
+	bridgereg_t device;
+	bridge_t *bridge;
+	int pin, swlevel;
+	cpuid_t cpu;
+
+	pin = SLOT_FROM_PCI_IRQ(d->irq);
+	bc = IRQ_TO_BRIDGE(d->irq);
+	bridge = bc->base;
+
+	pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", d->irq, pin);
+	/*
+	 * "map" irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	swlevel = find_level(&cpu, d->irq);
+	bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
+	bridge->b_int_enable |= (1 << pin);
+	bridge->b_int_enable |= 0x7ffffe00;	/* more stuff in int_enable */
+
+	/*
+	 * Enable sending of an interrupt clear packt to the hub on a high to
+	 * low transition of the interrupt pin.
+	 *
+	 * IRIX sets additional bits in the address which are documented as
+	 * reserved in the bridge docs.
+	 */
+	bridge->b_int_mode |= (1UL << pin);
+
+	/*
+	 * We assume the bridge to have a 1:1 mapping between devices
+	 * (slots) and intr pins.
+	 */
+	device = bridge->b_int_device;
+	device &= ~(7 << (pin*3));
+	device |= (pin << (pin*3));
+	bridge->b_int_device = device;
+
+	bridge->b_wid_tflush;
+
+	intr_connect_level(cpu, swlevel);
+
+	return 0;	/* Never anything pending.  */
+}
+
+/* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
+static void shutdown_bridge_irq(struct irq_data *d)
+{
+	struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
+	bridge_t *bridge = bc->base;
+	int pin, swlevel;
+	cpuid_t cpu;
+
+	pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
+	pin = SLOT_FROM_PCI_IRQ(d->irq);
+
+	/*
+	 * map irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	swlevel = find_level(&cpu, d->irq);
+	intr_disconnect_level(cpu, swlevel);
+
+	bridge->b_int_enable &= ~(1 << pin);
+	bridge->b_wid_tflush;
+}
+
+static inline void enable_bridge_irq(struct irq_data *d)
+{
+	cpuid_t cpu;
+	int swlevel;
+
+	swlevel = find_level(&cpu, d->irq);	/* Criminal offence */
+	intr_connect_level(cpu, swlevel);
+}
+
+static inline void disable_bridge_irq(struct irq_data *d)
+{
+	cpuid_t cpu;
+	int swlevel;
+
+	swlevel = find_level(&cpu, d->irq);	/* Criminal offence */
+	intr_disconnect_level(cpu, swlevel);
+}
+
+static struct irq_chip bridge_irq_type = {
+	.name		= "bridge",
+	.irq_startup	= startup_bridge_irq,
+	.irq_shutdown	= shutdown_bridge_irq,
+	.irq_mask	= disable_bridge_irq,
+	.irq_unmask	= enable_bridge_irq,
+};
+
+void register_bridge_irq(unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
+}
+
+int request_bridge_irq(struct bridge_controller *bc)
+{
+	int irq = allocate_irqno();
+	int swlevel, cpu;
+	nasid_t nasid;
+
+	if (irq < 0)
+		return irq;
+
+	/*
+	 * "map" irq to a swlevel greater than 6 since the first 6 bits
+	 * of INT_PEND0 are taken
+	 */
+	cpu = bc->irq_cpu;
+	swlevel = alloc_level(cpu, irq);
+	if (unlikely(swlevel < 0)) {
+		free_irqno(irq);
+
+		return -EAGAIN;
+	}
+
+	/* Make sure it's not already pending when we connect it. */
+	nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
+	REMOTE_HUB_CLR_INTR(nasid, swlevel);
+
+	intr_connect_level(cpu, swlevel);
+
+	register_bridge_irq(irq);
+
+	return irq;
+}

arch/mips/sgi-ip27/ip27-irq.c

@@ -29,7 +29,6 @@
 #include <asm/mipsregs.h>
 
 #include <asm/processor.h>
-#include <asm/pci/bridge.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
@@ -54,50 +53,6 @@
 
 extern asmlinkage void ip27_irq(void);
 
-extern struct bridge_controller *irq_to_bridge[];
-extern int irq_to_slot[];
-
-/*
- * use these macros to get the encoded nasid and widget id
- * from the irq value
- */
-#define IRQ_TO_BRIDGE(i)		irq_to_bridge[(i)]
-#define SLOT_FROM_PCI_IRQ(i)		irq_to_slot[i]
-
-static inline int alloc_level(int cpu, int irq)
-{
-	struct hub_data *hub = hub_data(cpu_to_node(cpu));
-	struct slice_data *si = cpu_data[cpu].data;
-	int level;
-
-	level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
-	if (level >= LEVELS_PER_SLICE)
-		panic("Cpu %d flooded with devices", cpu);
-
-	__set_bit(level, hub->irq_alloc_mask);
-	si->level_to_irq[level] = irq;
-
-	return level;
-}
-
-static inline int find_level(cpuid_t *cpunum, int irq)
-{
-	int cpu, i;
-
-	for_each_online_cpu(cpu) {
-		struct slice_data *si = cpu_data[cpu].data;
-
-		for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
-			if (si->level_to_irq[i] == irq) {
-				*cpunum = cpu;
-
-				return i;
-			}
-	}
-
-	panic("Could not identify cpu/level for irq %d", irq);
-}
-
 /*
  * Find first bit set
  */
@@ -204,175 +159,6 @@ static void ip27_hub_error(void)
 	panic("CPU %d got a hub error interrupt", smp_processor_id());
 }
 
-static int intr_connect_level(int cpu, int bit)
-{
-	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
-	struct slice_data *si = cpu_data[cpu].data;
-
-	set_bit(bit, si->irq_enable_mask);
-
-	if (!cputoslice(cpu)) {
-		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
-		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
-	} else {
-		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
-		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
-	}
-
-	return 0;
-}
-
-static int intr_disconnect_level(int cpu, int bit)
-{
-	nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
-	struct slice_data *si = cpu_data[cpu].data;
-
-	clear_bit(bit, si->irq_enable_mask);
-
-	if (!cputoslice(cpu)) {
-		REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
-		REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
-	} else {
-		REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
-		REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
-	}
-
-	return 0;
-}
-
-/* Startup one of the (PCI ...) IRQs routes over a bridge.  */
-static unsigned int startup_bridge_irq(struct irq_data *d)
-{
-	struct bridge_controller *bc;
-	bridgereg_t device;
-	bridge_t *bridge;
-	int pin, swlevel;
-	cpuid_t cpu;
-
-	pin = SLOT_FROM_PCI_IRQ(d->irq);
-	bc = IRQ_TO_BRIDGE(d->irq);
-	bridge = bc->base;
-
-	pr_debug("bridge_startup(): irq= 0x%x  pin=%d\n", d->irq, pin);
-	/*
-	 * "map" irq to a swlevel greater than 6 since the first 6 bits
-	 * of INT_PEND0 are taken
-	 */
-	swlevel = find_level(&cpu, d->irq);
-	bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
-	bridge->b_int_enable |= (1 << pin);
-	bridge->b_int_enable |= 0x7ffffe00;	/* more stuff in int_enable */
-
-	/*
-	 * Enable sending of an interrupt clear packt to the hub on a high to
-	 * low transition of the interrupt pin.
-	 *
-	 * IRIX sets additional bits in the address which are documented as
-	 * reserved in the bridge docs.
-	 */
-	bridge->b_int_mode |= (1UL << pin);
-
-	/*
-	 * We assume the bridge to have a 1:1 mapping between devices
-	 * (slots) and intr pins.
-	 */
-	device = bridge->b_int_device;
-	device &= ~(7 << (pin*3));
-	device |= (pin << (pin*3));
-	bridge->b_int_device = device;
-
-	bridge->b_wid_tflush;
-
-	intr_connect_level(cpu, swlevel);
-
-	return 0;	/* Never anything pending.  */
-}
-
-/* Shutdown one of the (PCI ...) IRQs routes over a bridge.  */
-static void shutdown_bridge_irq(struct irq_data *d)
-{
-	struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
-	bridge_t *bridge = bc->base;
-	int pin, swlevel;
-	cpuid_t cpu;
-
-	pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
-	pin = SLOT_FROM_PCI_IRQ(d->irq);
-
-	/*
-	 * map irq to a swlevel greater than 6 since the first 6 bits
-	 * of INT_PEND0 are taken
-	 */
-	swlevel = find_level(&cpu, d->irq);
-	intr_disconnect_level(cpu, swlevel);
-
-	bridge->b_int_enable &= ~(1 << pin);
-	bridge->b_wid_tflush;
-}
-
-static inline void enable_bridge_irq(struct irq_data *d)
-{
-	cpuid_t cpu;
-	int swlevel;
-
-	swlevel = find_level(&cpu, d->irq);	/* Criminal offence */
-	intr_connect_level(cpu, swlevel);
-}
-
-static inline void disable_bridge_irq(struct irq_data *d)
-{
-	cpuid_t cpu;
-	int swlevel;
-
-	swlevel = find_level(&cpu, d->irq);	/* Criminal offence */
-	intr_disconnect_level(cpu, swlevel);
-}
-
-static struct irq_chip bridge_irq_type = {
-	.name		= "bridge",
-	.irq_startup	= startup_bridge_irq,
-	.irq_shutdown	= shutdown_bridge_irq,
-	.irq_mask	= disable_bridge_irq,
-	.irq_unmask	= enable_bridge_irq,
-};
-
-void register_bridge_irq(unsigned int irq)
-{
-	irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
-}
-
-int request_bridge_irq(struct bridge_controller *bc)
-{
-	int irq = allocate_irqno();
-	int swlevel, cpu;
-	nasid_t nasid;
-
-	if (irq < 0)
-		return irq;
-
-	/*
-	 * "map" irq to a swlevel greater than 6 since the first 6 bits
-	 * of INT_PEND0 are taken
-	 */
-	cpu = bc->irq_cpu;
-	swlevel = alloc_level(cpu, irq);
-	if (unlikely(swlevel < 0)) {
-		free_irqno(irq);
-
-		return -EAGAIN;
-	}
-
-	/* Make sure it's not already pending when we connect it. */
-	nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
-	REMOTE_HUB_CLR_INTR(nasid, swlevel);
-
-	intr_connect_level(cpu, swlevel);
-
-	register_bridge_irq(irq);
-
-	return irq;
-}
-
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned long pending = read_c0_cause() & read_c0_status();