dt-bindings: i2c: rk3x: add support for rk3399

The bus clock and function clock are separated at rk3399,
and others use one clock as the bus clock and function clock.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -6,10 +6,20 @@ RK3xxx SoCs.
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
-		"rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
+ - compatible: should be one of the following:
+   - "rockchip,rk3066-i2c": for rk3066
+   - "rockchip,rk3188-i2c": for rk3188
+   - "rockchip,rk3228-i2c": for rk3228
+   - "rockchip,rk3288-i2c": for rk3288
+   - "rockchip,rk3399-i2c": for rk3399
  - interrupts : interrupt number
- - clocks : parent clock
+ - clocks: See ../clock/clock-bindings.txt
+   - For older hardware (rk3066, rk3188, rk3228, rk3288):
+     - There is one clock that's used both to derive the functional clock
+       for the device and as the bus clock.
+   - For newer hardware (rk3399): specified by name
+     - "i2c": This is used to derive the functional clock.
+     - "pclk": This is the bus clock.
 
 Required on RK3066, RK3188 :