Commit 915ccd1d authored by Marc Zyngier's avatar Marc Zyngier

arm64: KVM: VHE: Introduce unified system register accessors

VHE brings its own bag of new system registers, or rather system
register accessors, as it define new ways to access both guest
and host system registers. For example, from the host:

- The host TCR_EL2 register is accessed using the TCR_EL1 accessor
- The guest TCR_EL1 register is accessed using the TCR_EL12 accessor

Obviously, this is confusing. A way to somehow reduce the complexity
of writing code for both ARMv8 and ARMv8.1 is to use a set of unified
accessors that will generate the right sysreg, depending on the mode
the CPU is running in. For example:

- read_sysreg_el1(tcr) will use TCR_EL1 on ARMv8, and TCR_EL12 on
  ARMv8.1 with VHE.
- read_sysreg_el2(tcr) will use TCR_EL2 on ARMv8, and TCR_EL1 on
  ARMv8.1 with VHE.

We end up with three sets of accessors ({read,write}_sysreg_el[012])
that can be directly used from C code. We take this opportunity to
also add the definition for the new VHE sysregs.
Reviewed-by: default avatarChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
parent cedbb8b7
......@@ -48,6 +48,78 @@ static inline unsigned long __hyp_kern_va(unsigned long v)
#define hyp_kern_va(v) (typeof(v))(__hyp_kern_va((unsigned long)(v)))
#define read_sysreg_elx(r,nvh,vh) \
({ \
u64 reg; \
asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##nvh),\
"mrs_s %0, " __stringify(r##vh),\
ARM64_HAS_VIRT_HOST_EXTN) \
: "=r" (reg)); \
reg; \
})
#define write_sysreg_elx(v,r,nvh,vh) \
do { \
u64 __val = (u64)(v); \
asm volatile(ALTERNATIVE("msr " __stringify(r##nvh) ", %x0",\
"msr_s " __stringify(r##vh) ", %x0",\
ARM64_HAS_VIRT_HOST_EXTN) \
: : "rZ" (__val)); \
} while (0)
/*
* Unified accessors for registers that have a different encoding
* between VHE and non-VHE. They must be specified without their "ELx"
* encoding.
*/
#define read_sysreg_el2(r) \
({ \
u64 reg; \
asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##_EL2),\
"mrs %0, " __stringify(r##_EL1),\
ARM64_HAS_VIRT_HOST_EXTN) \
: "=r" (reg)); \
reg; \
})
#define write_sysreg_el2(v,r) \
do { \
u64 __val = (u64)(v); \
asm volatile(ALTERNATIVE("msr " __stringify(r##_EL2) ", %x0",\
"msr " __stringify(r##_EL1) ", %x0",\
ARM64_HAS_VIRT_HOST_EXTN) \
: : "rZ" (__val)); \
} while (0)
#define read_sysreg_el0(r) read_sysreg_elx(r, _EL0, _EL02)
#define write_sysreg_el0(v,r) write_sysreg_elx(v, r, _EL0, _EL02)
#define read_sysreg_el1(r) read_sysreg_elx(r, _EL1, _EL12)
#define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12)
/* The VHE specific system registers and their encoding */
#define sctlr_EL12 sys_reg(3, 5, 1, 0, 0)
#define cpacr_EL12 sys_reg(3, 5, 1, 0, 2)
#define ttbr0_EL12 sys_reg(3, 5, 2, 0, 0)
#define ttbr1_EL12 sys_reg(3, 5, 2, 0, 1)
#define tcr_EL12 sys_reg(3, 5, 2, 0, 2)
#define afsr0_EL12 sys_reg(3, 5, 5, 1, 0)
#define afsr1_EL12 sys_reg(3, 5, 5, 1, 1)
#define esr_EL12 sys_reg(3, 5, 5, 2, 0)
#define far_EL12 sys_reg(3, 5, 6, 0, 0)
#define mair_EL12 sys_reg(3, 5, 10, 2, 0)
#define amair_EL12 sys_reg(3, 5, 10, 3, 0)
#define vbar_EL12 sys_reg(3, 5, 12, 0, 0)
#define contextidr_EL12 sys_reg(3, 5, 13, 0, 1)
#define cntkctl_EL12 sys_reg(3, 5, 14, 1, 0)
#define cntp_tval_EL02 sys_reg(3, 5, 14, 2, 0)
#define cntp_ctl_EL02 sys_reg(3, 5, 14, 2, 1)
#define cntp_cval_EL02 sys_reg(3, 5, 14, 2, 2)
#define cntv_tval_EL02 sys_reg(3, 5, 14, 3, 0)
#define cntv_ctl_EL02 sys_reg(3, 5, 14, 3, 1)
#define cntv_cval_EL02 sys_reg(3, 5, 14, 3, 2)
#define spsr_EL12 sys_reg(3, 5, 4, 0, 0)
#define elr_EL12 sys_reg(3, 5, 4, 0, 1)
/**
* hyp_alternate_select - Generates patchable code sequences that are
* used to switch between two implementations of a function, depending
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment