Merge tag 'v4.20-rockchip-dts64-1' of...

Merge tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).

* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
  arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
  arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
  arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
  arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
  arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
  arm64: dts: rockchip: add missing vop properties for px30
  arm64: dts: rockchip: Add idle-states to device tree for rk3399
  arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
  arm64: dts: rockchip: add GRF GPIO controller to rk3328
  arm64: dts: rockchip: add io-domain to roc-rk3328-cc
  arm64: dts: rockchip: add PX30 evaluation board devicetree
  arm64: dts: rockchip: add core dtsi file for PX30 SoCs
  dt-bindings: rockchip: grf: add grf and pmugrf description for px30
  arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/rockchip.txt

@@ -59,6 +59,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
 
+- Firefly ROC-RK3399-PC board:
+    Required root node properties:
+      - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@@ -168,6 +172,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
 
+- Rockchip PX30 Evaluation board:
+    Required root node properties:
+      - compatible = "rockchip,px30-evb", "rockchip,px30";
+
 - Rockchip RV1108 Evaluation board
     Required root node properties:
       - compatible = "rockchip,rv1108-evb", "rockchip,rv1108";

Documentation/devicetree/bindings/soc/rockchip/grf.txt

@@ -13,6 +13,7 @@ On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
 Required Properties:
 
 - compatible: GRF should be one of the following:
+   - "rockchip,px30-grf", "syscon": for px30
    - "rockchip,rk3036-grf", "syscon": for rk3036
    - "rockchip,rk3066-grf", "syscon": for rk3066
    - "rockchip,rk3188-grf", "syscon": for rk3188
@@ -23,6 +24,7 @@ Required Properties:
    - "rockchip,rk3399-grf", "syscon": for rk3399
    - "rockchip,rv1108-grf", "syscon": for rv1108
 - compatible: PMUGRF should be one of the following:
+   - "rockchip,px30-pmugrf", "syscon": for px30
    - "rockchip,rk3368-pmugrf", "syscon": for rk3368
    - "rockchip,rk3399-pmugrf", "syscon": for rk3399
 - compatible: SGRF should be one of the following

arch/arm64/boot/dts/rockchip/Makefile

 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
@@ -14,5 +15,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb

arch/arm64/boot/dts/rockchip/px30-evb.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+	model = "Rockchip PX30 EVB";
+	compatible = "rockchip,px30-evb", "rockchip,px30";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 2>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		esc-key {
+			label = "esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1310000>;
+		};
+
+		home-key {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <624000>;
+		};
+
+		menu-key {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <987000>;
+		};
+
+		vol-down-key {
+			label = "volume down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		vol-up-key {
+			label = "volume up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 25000 0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - PDN (power down when low)
+		 */
+		reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_phy";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc5v0_sys: vccsys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&display_subsystem {
+	status = "okay";
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	non-removable;
+	status = "okay";
+};
+
+&gmac {
+	clock_in_out = "output";
+	phy-supply = <&vcc_phy>;
+	snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 50000 50000>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2s1_2ch {
+	status = "okay";
+};
+
+&io_domains {
+	status = "okay";
+};
+
+&pinctrl {
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins =
+				<2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		soc_slppin_gpio: soc_slppin_gpio {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+
+		soc_slppin_slp: soc_slppin_slp {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+		};
+
+		soc_slppin_rst: soc_slppin_rst {
+			rockchip,pins =
+				<0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins =
+				<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <800>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer &uart1_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};

arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts

@@ -41,6 +41,19 @@ vcc_sd: sdmmc-regulator {
 		vin-supply = <&vcc_io>;
 	};
 
+	vcc_sdio: sdmmcio-regulator {
+		compatible = "regulator-gpio";
+		gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		regulator-name = "vcc_sdio";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
 	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -208,6 +221,18 @@ regulator-state-mem {
 	};
 };
 
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_sdio>;
+	vccio4-supply = <&vcc_18>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
 &pinctrl {
 	pmic {
 		pmic_int_l: pmic-int-l {
@@ -230,7 +255,12 @@ &sdmmc {
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -46,7 +46,7 @@ vcc_host_5v: vcc-host-5v-regulator {
 	vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb20_host_drv>;
 		regulator-name = "vcc_host1_5v";
@@ -238,7 +238,7 @@ pmic_int_l: pmic-int-l {
 
 	usb2 {
 		usb20_host_drv: usb20-host-drv {
-			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -249,6 +249,12 @@ io_domains: io-domains {
 			status = "disabled";
 		};
 
+		grf_gpio: grf-gpio {
+			compatible = "rockchip,rk3328-grf-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
 		power: power-controller {
 			compatible = "rockchip,rk3328-power-controller";
 			#power-domain-cells = <1>;
@@ -274,7 +280,6 @@ reboot-mode {
 			mode-bootloader = <BOOT_FASTBOOT>;
 			mode-loader = <BOOT_BL_DOWNLOAD>;
 		};
-
 	};
 
 	uart0: serial@ff110000 {

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -622,6 +622,12 @@ vcc5v0_host_en: vcc5v0-host-en {
 		};
 	};
 
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	leds {
 		work_led_gpio: work_led-gpio {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -646,6 +652,36 @@ &saradc {
 	status = "okay";
 };
 
+&sdio0 {
+	/* WiFi & BT combo module Ampak AP6356S */
+	bus-width = <4>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+	sd-uhs-sdr104;
+
+	/* Power supply */
+	vqmmc-supply = &vcc1v8_s3;	/* IO line */
+	vmmc-supply = &vcc_sdio;	/* card's power */
+
+	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+		interrupt-names = "host-wake";
+		brcm,drive-strength = <5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -103,20 +103,10 @@ vcc3v3_sys: vcc3v3-sys {
 		vin-supply = <&vcc_sys>;
 	};
 
-	vcc_sys: vcc-sys {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&dc_12v>;
-	};
-
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
@@ -124,6 +114,26 @@ vcc5v0_host: vcc5v0-host-regulator {
 		vin-supply = <&vcc_sys>;
 	};
 
+	vcc5v0_typec0: vcc5v0-typec0-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_typec0_en>;
+		regulator-name = "vcc5v0_typec0";
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -208,7 +218,7 @@ rk808: pmic@1b {
 		#clock-cells = <1>;
 		clock-output-names = "xin32k", "rk808-clkout2";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+		pinctrl-0 = <&pmic_int_l>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -455,11 +465,6 @@ pmic_int_l: pmic-int-l {
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		pmic_dvs2: pmic-dvs2 {
-			rockchip,pins =
-				<1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-		};
-
 		vsel1_gpio: vsel1-gpio {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
@@ -474,6 +479,10 @@ vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins =
 				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+		vcc5v0_typec0_en: vcc5v0-typec0-en {
+			rockchip,pins =
+				<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 };
 
@@ -531,6 +540,7 @@ &u2phy0 {
 	status = "okay";
 
 	u2phy0_otg: otg-port {
+		phy-supply = <&vcc5v0_typec0>;
 		status = "okay";
 	};
 

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -74,6 +74,7 @@ cpu_l0: cpu@0 {
 			clocks = <&cru ARMCLKL>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu_l1: cpu@1 {
@@ -84,6 +85,7 @@ cpu_l1: cpu@1 {
 			clocks = <&cru ARMCLKL>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -94,6 +96,7 @@ cpu_l2: cpu@2 {
 			clocks = <&cru ARMCLKL>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -104,6 +107,7 @@ cpu_l3: cpu@3 {
 			clocks = <&cru ARMCLKL>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -114,6 +118,7 @@ cpu_b0: cpu@100 {
 			clocks = <&cru ARMCLKB>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
 		};
 
 		cpu_b1: cpu@101 {
@@ -124,6 +129,29 @@ cpu_b1: cpu@101 {
 			clocks = <&cru ARMCLKB>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
+			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+
+			CLUSTER_SLEEP: cluster-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x1010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <2000>;
+			};
 		};
 	};