Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and...

Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus

arch/arm/mach-omap1/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o
+obj-y += clock.o clock_data.o opp_data.o reset.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 

arch/arm/mach-omap1/board-ams-delta.c

@@ -165,7 +165,7 @@ static struct map_desc ams_delta_io_desc[] __initdata = {
 	}
 };
 
-static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+static struct omap_lcd_config ams_delta_lcd_config = {
 	.ctrl_name	= "internal",
 };
 
@@ -175,7 +175,7 @@ static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.pins[0]	= 2,
 };
 
-static struct omap_board_config_kernel ams_delta_config[] = {
+static struct omap_board_config_kernel ams_delta_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ams_delta_lcd_config },
 };
 
@@ -208,14 +208,14 @@ static const struct matrix_keymap_data ams_delta_keymap_data = {
 	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
 };
 
-static struct omap_kp_platform_data ams_delta_kp_data = {
+static struct omap_kp_platform_data ams_delta_kp_data __initdata = {
 	.rows		= 8,
 	.cols		= 8,
 	.keymap_data	= &ams_delta_keymap_data,
 	.delay		= 9,
 };
 
-static struct platform_device ams_delta_kp_device = {
+static struct platform_device ams_delta_kp_device __initdata = {
 	.name		= "omap-keypad",
 	.id		= -1,
 	.dev		= {
@@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device = {
 	.resource	= ams_delta_kp_resources,
 };
 
-static struct platform_device ams_delta_lcd_device = {
+static struct platform_device ams_delta_lcd_device __initdata = {
 	.name	= "lcd_ams_delta",
 	.id	= -1,
 };
 
-static struct platform_device ams_delta_led_device = {
+static struct platform_device ams_delta_led_device __initdata = {
 	.name	= "ams-delta-led",
 	.id	= -1
 };
@@ -259,7 +259,7 @@ static int ams_delta_camera_power(struct device *dev, int power)
 #define ams_delta_camera_power	NULL
 #endif
 
-static struct soc_camera_link __initdata ams_delta_iclink = {
+static struct soc_camera_link ams_delta_iclink = {
 	.bus_id         = 0,	/* OMAP1 SoC camera bus */
 	.i2c_adapter_id = 1,
 	.board_info     = &ams_delta_camera_board_info[0],
@@ -267,7 +267,7 @@ static struct soc_camera_link __initdata ams_delta_iclink = {
 	.power		= ams_delta_camera_power,
 };
 
-static struct platform_device ams_delta_camera_device = {
+static struct platform_device ams_delta_camera_device __initdata = {
 	.name   = "soc-camera-pdrv",
 	.id     = 0,
 	.dev    = {

arch/arm/mach-omap1/board-fsample.c

@@ -287,11 +287,11 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-static struct omap_lcd_config fsample_lcd_config __initdata = {
+static struct omap_lcd_config fsample_lcd_config = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel fsample_config[] = {
+static struct omap_board_config_kernel fsample_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&fsample_lcd_config },
 };
 

arch/arm/mach-omap1/board-h2.c

@@ -202,7 +202,7 @@ static int h2_nand_dev_ready(struct mtd_info *mtd)
 
 static const char *h2_part_probes[] = { "cmdlinepart", NULL };
 
-struct platform_nand_data h2_nand_platdata = {
+static struct platform_nand_data h2_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,

arch/arm/mach-omap1/board-h3.c

@@ -204,7 +204,7 @@ static int nand_dev_ready(struct mtd_info *mtd)
 
 static const char *part_probes[] = { "cmdlinepart", NULL };
 
-struct platform_nand_data nand_platdata = {
+static struct platform_nand_data nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,

arch/arm/mach-omap1/board-htcherald.c

@@ -331,7 +331,7 @@ static struct resource htcpld_resources[] = {
 	},
 };
 
-struct htcpld_chip_platform_data htcpld_chips[] = {
+static struct htcpld_chip_platform_data htcpld_chips[] = {
 	[0] = {
 		.addr		= 0x03,
 		.reset		= 0x04,
@@ -366,7 +366,7 @@ struct htcpld_chip_platform_data htcpld_chips[] = {
 	},
 };
 
-struct htcpld_core_platform_data htcpld_pfdata = {
+static struct htcpld_core_platform_data htcpld_pfdata = {
 	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
 	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
 	.i2c_adapter_id	   = 1,

arch/arm/mach-omap1/board-innovator.c

@@ -365,7 +365,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
 
-void __init innovator_mmc_init(void)
+static void __init innovator_mmc_init(void)
 {
 	mmc_data[0] = &mmc1_data;
 	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);

arch/arm/mach-omap1/board-nokia770.c

@@ -115,7 +115,7 @@ static struct mipid_platform_data nokia770_mipid_platform_data = {
 	.shutdown = mipid_shutdown,
 };
 
-static void mipid_dev_init(void)
+static void __init mipid_dev_init(void)
 {
 	const struct omap_lcd_config *conf;
 
@@ -126,7 +126,7 @@ static void mipid_dev_init(void)
 	}
 }
 
-static void ads7846_dev_init(void)
+static void __init ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
@@ -170,7 +170,7 @@ static struct hwa742_platform_data nokia770_hwa742_platform_data = {
 	.te_connected		= 1,
 };
 
-static void hwa742_dev_init(void)
+static void __init hwa742_dev_init(void)
 {
 	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
 	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);

arch/arm/mach-omap1/board-palmte.c

@@ -230,19 +230,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = {
 	},
 };
 
-static void palmte_headphones_detect(void *data, int state)
-{
-	if (state) {
-		/* Headphones connected, disable speaker */
-		gpio_set_value(PALMTE_SPEAKER_GPIO, 0);
-		printk(KERN_INFO "PM: speaker off\n");
-	} else {
-		/* Headphones unplugged, re-enable speaker */
-		gpio_set_value(PALMTE_SPEAKER_GPIO, 1);
-		printk(KERN_INFO "PM: speaker on\n");
-	}
-}
-
 static void __init palmte_misc_gpio_setup(void)
 {
 	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */

arch/arm/mach-omap1/board-voiceblue.c

@@ -26,10 +26,12 @@
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
+#include <mach/system.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <plat/board-voiceblue.h>
 #include <plat/common.h>
 #include <mach/gpio.h>
 #include <plat/flash.h>
@@ -163,52 +165,6 @@ static void __init voiceblue_init_irq(void)
 	omap_init_irq();
 }
 
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_board_config = voiceblue_config;
-	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
 static void __init voiceblue_map_io(void)
 {
 	omap1_map_common_io();
@@ -275,8 +231,17 @@ void voiceblue_wdt_ping(void)
 	gpio_set_value(0, wdt_gpio_state);
 }
 
-void voiceblue_reset(void)
+static void voiceblue_reset(char mode, const char *cmd)
 {
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
 	set_bit(MACHINE_REBOOT, &machine_state);
 	voiceblue_wdt_enable();
 	while (1) ;
@@ -286,6 +251,54 @@ EXPORT_SYMBOL(voiceblue_wdt_enable);
 EXPORT_SYMBOL(voiceblue_wdt_disable);
 EXPORT_SYMBOL(voiceblue_wdt_ping);
 
+static void __init voiceblue_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	/* Watchdog */
+	gpio_request(0, "Watchdog");
+	/* smc91x reset */
+	gpio_request(7, "SMC91x reset");
+	gpio_direction_output(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	gpio_set_value(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	gpio_request(8, "SMC91x irq");
+	/* 16C554 reset*/
+	gpio_request(6, "16C554 reset");
+	gpio_direction_output(6, 0);
+	/* 16C554 interrupt pins */
+	gpio_request(12, "16C554 irq");
+	gpio_request(13, "16C554 irq");
+	gpio_request(14, "16C554 irq");
+	gpio_request(15, "16C554 irq");
+	set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
+
+	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+	omap_board_config = voiceblue_config;
+	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+	omap_serial_init();
+	omap1_usb_init(&voiceblue_usb_config);
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	/* There is a good chance board is going up, so enable power LED
+	 * (it is connected through invertor) */
+	omap_writeb(0x00, OMAP_LPG1_LCR);
+	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
+
+	arch_reset = voiceblue_reset;
+}
+
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
 	.boot_params	= 0x10000100,

arch/arm/mach-omap1/reset.c

+/*
+ * OMAP1 reset support
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/system.h>
+#include <plat/prcm.h>
+
+void omap1_arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	omap_writew(1, ARM_RSTCT1);
+}
+
+void (*arch_reset)(char, const char *) = omap1_arch_reset;

arch/arm/mach-omap2/Kconfig

@@ -53,25 +53,30 @@ config ARCH_OMAP4
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP2420
+config SOC_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP2
 	default y
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP2430
+config SOC_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 	default y
 	select ARCH_OMAP_OTG
 
-config ARCH_OMAP3430
+config SOC_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
 	default y
 	select ARCH_OMAP_OTG
 
+config SOC_OMAPTI816X
+	bool "TI816X support"
+	depends on ARCH_OMAP3
+	default y
+
 config OMAP_PACKAGE_ZAF
        bool
 
@@ -106,25 +111,25 @@ config MACH_OMAP_GENERIC
 
 config MACH_OMAP2_TUSB6010
 	bool
-	depends on ARCH_OMAP2 && ARCH_OMAP2420
+	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2430
+	depends on SOC_OMAP2430
 	default y
 	select OMAP_PACKAGE_ZAC
 
@@ -219,7 +224,7 @@ config MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
-	depends on ARCH_OMAP2420
+	depends on SOC_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
@@ -294,6 +299,11 @@ config MACH_OMAP_3630SDP
 	default y
 	select OMAP_PACKAGE_CBP
 
+config MACH_TI8168EVM
+	bool "TI8168 Evaluation Module"
+	depends on SOC_OMAPTI816X
+	default y
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	default y

arch/arm/mach-omap2/Makefile

@@ -31,8 +31,8 @@ AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
 AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 # Functions loaded to SRAM
-obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
+obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
+obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 AFLAGS_sram242x.o			:=-Wa,-march=armv6
@@ -40,8 +40,8 @@ AFLAGS_sram243x.o			:=-Wa,-march=armv6
 AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Pin multiplexing
-obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
+obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
+obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 
@@ -113,8 +113,8 @@ obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
 					   clkt2xxx_dpllcore.o \
 					   clkt2xxx_virt_prcm_set.o \
 					   clkt2xxx_apll.o clkt2xxx_osc.o
-obj-$(CONFIG_ARCH_OMAP2420)		+= clock2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= clock2430.o clock2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
 					   clock34xx.o clkt34xx_dpll3m2.o \
 					   clock3517.o clock36xx.o \
@@ -123,12 +123,12 @@ obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
 					   dpll3xxx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
-obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o
 
 # hwmod data
-obj-$(CONFIG_ARCH_OMAP2420)		+= omap_hwmod_2420_data.o
-obj-$(CONFIG_ARCH_OMAP2430)		+= omap_hwmod_2430_data.o
+obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
+obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o
 
@@ -224,6 +224,7 @@ obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 # Platform specific device init code
 usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
 obj-y					+= $(usbfs-m) $(usbfs-y)

arch/arm/mach-omap2/board-2430sdp.c

@@ -139,13 +139,12 @@ static struct omap_board_config_kernel sdp2430_config[] __initdata = {
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
-static void __init omap_2430sdp_init_irq(void)
+static void __init omap_2430sdp_init_early(void)
 {
 	omap_board_config = sdp2430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
@@ -253,9 +252,10 @@ static void __init omap_2430sdp_map_io(void)
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_2430sdp_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_2430sdp_init_irq,
+	.map_io		= omap_2430sdp_map_io,
+	.init_early	= omap_2430sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -327,14 +327,13 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
 };
 
-static void __init omap_3430sdp_init_irq(void)
+static void __init omap_3430sdp_init_early(void)
 {
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
-	omap_init_irq();
 }
 
 static int sdp3430_batt_table[] = {
@@ -822,9 +821,10 @@ static void __init omap_3430sdp_init(void)
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_3430sdp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_3430sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -69,14 +69,13 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_config_kernel sdp_config[] __initdata = {
 };
 
-static void __init omap_sdp_init_irq(void)
+static void __init omap_sdp_init_early(void)
 {
 	omap_board_config = sdp_config;
 	omap_board_config_size = ARRAY_SIZE(sdp_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
 				  h8mbx00u0mer0em_sdrc_params);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -216,9 +215,10 @@ static void __init omap_sdp_init(void)
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_sdp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_sdp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -239,7 +239,7 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&sdp4430_lcd_config },
 };
 
-static void __init omap_4430sdp_init_irq(void)
+static void __init omap_4430sdp_init_early(void)
 {
 	omap_board_config = sdp4430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
@@ -248,7 +248,6 @@ static void __init omap_4430sdp_init_irq(void)
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
-	gic_init_irq();
 }
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -605,9 +604,10 @@ static void __init omap_4430sdp_map_io(void)
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_4430sdp_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_4430sdp_init_irq,
+	.map_io		= omap_4430sdp_map_io,
+	.init_early	= omap_4430sdp_init_early,
+	.init_irq	= gic_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -49,14 +49,13 @@ static struct omap_board_mux board_mux[] __initdata = {
 #define board_mux	NULL
 #endif
 
-static void __init am3517_crane_init_irq(void)
+static void __init am3517_crane_init_early(void)
 {
 	omap_board_config = am3517_crane_config;
 	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
 
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
@@ -108,9 +107,10 @@ static void __init am3517_crane_init(void)
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= am3517_crane_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= am3517_crane_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -396,13 +396,12 @@ static struct platform_device *am3517_evm_devices[] __initdata = {
 	&am3517_evm_dss_device,
 };
 
-static void __init am3517_evm_init_irq(void)
+static void __init am3517_evm_init_early(void)
 {
 	omap_board_config = am3517_evm_config;
 	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -521,9 +520,10 @@ static void __init am3517_evm_init(void)
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= am3517_evm_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= am3517_evm_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -274,13 +274,12 @@ static struct omap_board_config_kernel apollon_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
-static void __init omap_apollon_init_irq(void)
+static void __init omap_apollon_init_early(void)
 {
 	omap_board_config = apollon_config;
 	omap_board_config_size = ARRAY_SIZE(apollon_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static void __init apollon_led_init(void)
@@ -355,9 +354,10 @@ static void __init omap_apollon_map_io(void)
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_apollon_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_apollon_init_irq,
+	.map_io		= omap_apollon_map_io,
+	.init_early	= omap_apollon_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -683,7 +683,7 @@ static void __init cm_t35_init_i2c(void)
 static struct omap_board_config_kernel cm_t35_config[] __initdata = {
 };
 
-static void __init cm_t35_init_irq(void)
+static void __init cm_t35_init_early(void)
 {
 	omap_board_config = cm_t35_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
@@ -691,7 +691,6 @@ static void __init cm_t35_init_irq(void)
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
@@ -815,9 +814,10 @@ static void __init cm_t35_init(void)
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= cm_t35_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= cm_t35_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -254,14 +254,13 @@ static inline void cm_t3517_init_nand(void) {}
 static struct omap_board_config_kernel cm_t3517_config[] __initdata = {
 };
 
-static void __init cm_t3517_init_irq(void)
+static void __init cm_t3517_init_early(void)
 {
 	omap_board_config = cm_t3517_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
@@ -303,9 +302,10 @@ static void __init cm_t3517_init(void)
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve        = omap_reserve,
-	.init_irq	= cm_t3517_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= cm_t3517_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -456,11 +456,15 @@ static struct platform_device keys_gpio = {
 };
 
 
-static void __init devkit8000_init_irq(void)
+static void __init devkit8000_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init devkit8000_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -813,8 +817,9 @@ static void __init devkit8000_init(void)
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= devkit8000_init_early,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-generic.c

@@ -33,13 +33,12 @@
 static struct omap_board_config_kernel generic_config[] = {
 };
 
-static void __init omap_generic_init_irq(void)
+static void __init omap_generic_init_early(void)
 {
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static void __init omap_generic_init(void)
@@ -68,9 +67,10 @@ static void __init omap_generic_map_io(void)
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_generic_init_irq,
+	.map_io		= omap_generic_map_io,
+	.init_early	= omap_generic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-h4.c

@@ -290,12 +290,16 @@ static struct omap_board_config_kernel h4_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
-static void __init omap_h4_init_irq(void)
+static void __init omap_h4_init_early(void)
 {
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
+}
+
+static void __init omap_h4_init_irq(void)
+{
 	omap_init_irq();
 	h4_init_flash();
 }
@@ -378,8 +382,9 @@ static void __init omap_h4_map_io(void)
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= omap_h4_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap_h4_map_io,
+	.init_early	= omap_h4_init_early,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-igep0020.c

@@ -525,12 +525,11 @@ static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_vwlan_device,
 };
 
-static void __init igep2_init_irq(void)
+static void __init igep2_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
-	omap_init_irq();
 }
 
 static struct twl4030_codec_audio_data igep2_audio_data = {
@@ -716,9 +715,10 @@ static void __init igep2_init(void)
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= igep2_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= igep2_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0030.c

@@ -331,12 +331,11 @@ static struct platform_device *igep3_devices[] __initdata = {
 	&igep3_vwlan_device,
 };
 
-static void __init igep3_init_irq(void)
+static void __init igep3_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
-	omap_init_irq();
 }
 
 static struct twl4030_platform_data igep3_twl4030_pdata = {
@@ -452,7 +451,8 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
-	.init_irq	= igep3_init_irq,
+	.init_early	= igep3_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= igep3_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -288,13 +288,12 @@ static struct omap_board_config_kernel ldp_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&ldp_lcd_config },
 };
 
-static void __init omap_ldp_init_irq(void)
+static void __init omap_ldp_init_early(void)
 {
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 static struct twl4030_usb_data ldp_usb_data = {
@@ -443,9 +442,10 @@ static void __init omap_ldp_init(void)
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_ldp_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_ldp_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -628,11 +628,10 @@ static void __init n8x0_map_io(void)
 	omap242x_map_common_io();
 }
 
-static void __init n8x0_init_irq(void)
+static void __init n8x0_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -703,27 +702,30 @@ static void __init n8x0_init_machine(void)
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.boot_params	= 0x80000100,
-	.map_io		= n8x0_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= n8x0_init_irq,
+	.map_io		= n8x0_map_io,
+	.init_early	= n8x0_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -536,11 +536,15 @@ static struct platform_device keys_gpio = {
 	},
 };
 
-static void __init omap3_beagle_init_irq(void)
+static void __init omap3_beagle_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init omap3_beagle_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -638,8 +642,9 @@ static void __init omap3_beagle_init(void)
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3_beagle_init_early,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap3evm.c

@@ -625,13 +625,12 @@ static struct spi_board_info omap3evm_spi_board_info[] = {
 static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
 };
 
-static void __init omap3_evm_init_irq(void)
+static void __init omap3_evm_init_early(void)
 {
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
-	omap_init_irq();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
@@ -720,9 +719,10 @@ static void __init omap3_evm_init(void)
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap3_evm_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3_evm_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -195,11 +195,10 @@ static inline void __init board_smsc911x_init(void)
 	gpmc_smsc911x_init(&board_smsc911x_data);
 }
 
-static void __init omap3logic_init_irq(void)
+static void __init omap3logic_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -225,7 +224,8 @@ static void __init omap3logic_init(void)
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_irq	= omap3logic_init_irq,
+	.init_early	= omap3logic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap_timer,
 MACHINE_END
@@ -233,7 +233,8 @@ MACHINE_END
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
-	.init_irq	= omap3logic_init_irq,
+	.init_early	= omap3logic_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -634,12 +634,11 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static void __init omap3pandora_init_irq(void)
+static void __init omap3pandora_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
 static void __init pandora_wl1251_init(void)
@@ -727,9 +726,10 @@ static void __init omap3pandora_init(void)
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap3pandora_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3pandora_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -591,12 +591,16 @@ static struct spi_board_info omap3stalker_spi_board_info[] = {
 static struct omap_board_config_kernel omap3_stalker_config[] __initdata = {
 };
 
-static void __init omap3_stalker_init_irq(void)
+static void __init omap3_stalker_init_early(void)
 {
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
+}
+
+static void __init omap3_stalker_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -666,6 +670,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg@ema-tech.com */
 	.boot_params		= 0x80000100,
 	.map_io			= omap3_map_io,
+	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap_timer,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -415,7 +415,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 };
 #endif
 
-static void __init omap3_touchbook_init_irq(void)
+static void __init omap3_touchbook_init_early(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = omap3_touchbook_config;
@@ -423,6 +423,10 @@ static void __init omap3_touchbook_init_irq(void)
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
+}
+
+static void __init omap3_touchbook_init_irq(void)
+{
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -538,8 +542,9 @@ static void __init omap3_touchbook_init(void)
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= omap3_touchbook_init_early,
 	.init_irq	= omap3_touchbook_init_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap4panda.c

@@ -76,11 +76,10 @@ static struct platform_device *panda_devices[] __initdata = {
 	&leds_gpio,
 };
 
-static void __init omap4_panda_init_irq(void)
+static void __init omap4_panda_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(NULL, NULL);
-	gic_init_irq();
 }
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -424,7 +423,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.boot_params	= 0x80000100,
 	.reserve	= omap_reserve,
 	.map_io		= omap4_panda_map_io,
-	.init_irq	= omap4_panda_init_irq,
+	.init_early	= omap4_panda_init_early,
+	.init_irq	= gic_init_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -409,14 +409,13 @@ static struct omap_board_config_kernel overo_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&overo_lcd_config },
 };
 
-static void __init overo_init_irq(void)
+static void __init overo_init_early(void)
 {
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
 	omap2_init_common_infrastructure();
 	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
 }
 
 static struct platform_device *overo_devices[] __initdata = {
@@ -501,9 +500,10 @@ static void __init overo_init(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= overo_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= overo_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -138,14 +138,13 @@ static void __init rm680_peripherals_init(void)
 	omap2_hsmmc_init(mmc);
 }
 
-static void __init rm680_init_irq(void)
+static void __init rm680_init_early(void)
 {
 	struct omap_sdrc_params *sdrc_params;
 
 	omap2_init_common_infrastructure();
 	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_devices(sdrc_params, sdrc_params);
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -176,9 +175,10 @@ static void __init rm680_map_io(void)
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.boot_params	= 0x80000100,
-	.map_io		= rm680_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= rm680_init_irq,
+	.map_io		= rm680_map_io,
+	.init_early	= rm680_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rx51.c

@@ -98,7 +98,7 @@ static struct omap_board_config_kernel rx51_config[] = {
 	{ OMAP_TAG_LCD,		&rx51_lcd_config },
 };
 
-static void __init rx51_init_irq(void)
+static void __init rx51_init_early(void)
 {
 	struct omap_sdrc_params *sdrc_params;
 
@@ -108,7 +108,6 @@ static void __init rx51_init_irq(void)
 	omap2_init_common_infrastructure();
 	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_devices(sdrc_params, sdrc_params);
-	omap_init_irq();
 }
 
 extern void __init rx51_peripherals_init(void);
@@ -149,9 +148,10 @@ static void __init rx51_map_io(void)
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
-	.map_io		= rx51_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= rx51_init_irq,
+	.map_io		= rx51_map_io,
+	.init_early	= rx51_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ti8168evm.c

+/*
+ * Code for TI8168 EVM.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/irqs.h>
+#include <plat/board.h>
+#include <plat/common.h>
+
+static struct omap_board_config_kernel ti8168_evm_config[] __initdata = {
+};
+
+static void __init ti8168_init_early(void)
+{
+	omap_board_config = ti8168_evm_config;
+	omap_board_config_size = ARRAY_SIZE(ti8168_evm_config);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
+}
+
+static void __init ti8168_evm_init_irq(void)
+{
+	omap_init_irq();
+}
+
+static void __init ti8168_evm_init(void)
+{
+	omap_serial_init();
+}
+
+static void __init ti8168_evm_map_io(void)
+{
+	omap2_set_globals_ti816x();
+	omapti816x_map_common_io();
+}
+
+MACHINE_START(TI8168EVM, "ti8168evm")
+	/* Maintainer: Texas Instruments */
+	.boot_params	= 0x80000100,
+	.map_io		= ti8168_evm_map_io,
+	.init_early	= ti8168_init_early,
+	.init_irq	= ti8168_evm_init_irq,
+	.timer		= &omap_timer,
+	.init_machine	= ti8168_evm_init,
+MACHINE_END

arch/arm/mach-omap2/board-zoom.c

@@ -33,7 +33,7 @@
 
 #define ZOOM3_EHCI_RESET_GPIO		64
 
-static void __init omap_zoom_init_irq(void)
+static void __init omap_zoom_init_early(void)
 {
 	omap2_init_common_infrastructure();
 	if (machine_is_omap_zoom2())
@@ -42,8 +42,6 @@ static void __init omap_zoom_init_irq(void)
 	else if (machine_is_omap_zoom3())
 		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
 					  h8mbx00u0mer0em_sdrc_params);
-
-	omap_init_irq();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -135,18 +133,20 @@ static void __init omap_zoom_init(void)
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
 	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom_init_irq,
+	.map_io		= omap3_map_io,
+	.init_early	= omap_zoom_init_early,
+	.init_irq	= omap_init_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap2/clock2xxx.h

@@ -20,13 +20,13 @@ u32 omap2xxx_get_apll_clkin(void);
 u32 omap2xxx_get_sysclkdiv(void);
 void omap2xxx_clk_prepare_for_reboot(void);
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 int omap2420_clk_init(void);
 #else
 #define omap2420_clk_init()	0
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 int omap2430_clk_init(void);
 #else
 #define omap2430_clk_init()	0

arch/arm/mach-omap2/clock3xxx_data.c

@@ -3471,6 +3471,9 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_omap3630()) {
 		cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
 		cpu_clkflg = CK_36XX;
+	} else if (cpu_is_ti816x()) {
+		cpu_mask = RATE_IN_TI816X;
+		cpu_clkflg = CK_TI816X;
 	} else if (cpu_is_omap34xx()) {
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
 			cpu_mask = RATE_IN_3430ES1;
@@ -3550,7 +3553,7 @@ int __init omap3xxx_clk_init(void)
 	/*
 	 * Lock DPLL5 and put it in autoidle.
 	 */
-	if (omap_rev() >= OMAP3430_REV_ES2_0)
+	if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
 		omap3_clk_lock_dpll5();
 
 	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */

arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c

@@ -171,7 +171,7 @@ static struct clkdm_dep core_24xx_wkdeps[] = {
 
 /* 2430-specific possible wakeup dependencies */
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 
 /* 2430 PM_WKDEP_MDM: CORE, MPU, WKUP */
 static struct clkdm_dep mdm_2430_wkdeps[] = {
@@ -194,7 +194,7 @@ static struct clkdm_dep mdm_2430_wkdeps[] = {
 	{ NULL },
 };
 
-#endif /* CONFIG_ARCH_OMAP2430 */
+#endif /* CONFIG_SOC_OMAP2430 */
 
 
 /* OMAP3-specific possible dependencies */
@@ -450,7 +450,7 @@ static struct clockdomain cm_clkdm = {
  * 2420-only clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 
 static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
@@ -514,14 +514,14 @@ static struct clockdomain dss_2420_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
-#endif   /* CONFIG_ARCH_OMAP2420 */
+#endif   /* CONFIG_SOC_OMAP2420 */
 
 
 /*
  * 2430-only clockdomains
  */
 
-#if defined(CONFIG_ARCH_OMAP2430)
+#if defined(CONFIG_SOC_OMAP2430)
 
 static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
@@ -600,7 +600,7 @@ static struct clockdomain dss_2430_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
-#endif    /* CONFIG_ARCH_OMAP2430 */
+#endif    /* CONFIG_SOC_OMAP2430 */
 
 
 /*
@@ -811,7 +811,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = {
 	&cm_clkdm,
 	&prm_clkdm,
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 	&mpu_2420_clkdm,
 	&iva1_2420_clkdm,
 	&dsp_2420_clkdm,
@@ -821,7 +821,7 @@ static struct clockdomain *clockdomains_omap2[] __initdata = {
 	&dss_2420_clkdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 	&mpu_2430_clkdm,
 	&mdm_clkdm,
 	&dsp_2430_clkdm,

arch/arm/mach-omap2/common.c

@@ -40,7 +40,7 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
@@ -61,7 +61,7 @@ void __init omap2_set_globals_242x(void)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2430)
+#if defined(CONFIG_SOC_OMAP2430)
 
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
@@ -108,6 +108,27 @@ void __init omap3_map_io(void)
 	omap2_set_globals_3xxx();
 	omap34xx_map_common_io();
 }
+
+/*
+ * Adjust TAP register base such that omap3_check_revision accesses the correct
+ * TI816X register for checking device ID (it adds 0x204 to tap base while
+ * TI816X DEVICE ID register is at offset 0x600 from control base).
+ */
+#define TI816X_TAP_BASE		(TI816X_CTRL_BASE + \
+				TI816X_CONTROL_DEVICE_ID - 0x204)
+
+static struct omap_globals ti816x_globals = {
+	.class  = OMAP343X_CLASS,
+	.tap    = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
+	.ctrl   = TI816X_CTRL_BASE,
+	.prm    = TI816X_PRCM_BASE,
+	.cm     = TI816X_PRCM_BASE,
+};
+
+void __init omap2_set_globals_ti816x(void)
+{
+	__omap2_set_globals(&ti816x_globals);
+}
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/mach-omap2/control.h

@@ -52,6 +52,9 @@
 #define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
 #define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
 
+/* TI816X spefic control submodules */
+#define TI816X_CONTROL_DEVCONF		0x600
+
 /* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
 
 #define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
@@ -241,6 +244,9 @@
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
 
+/* TI816X CONTROL_DEVCONF register offsets */
+#define TI816X_CONTROL_DEVICE_ID	(TI816X_CONTROL_DEVCONF + 0x000)
+
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.

arch/arm/mach-omap2/devices.c

@@ -333,7 +333,7 @@ static struct platform_device omap2_mcspi2 = {
 	},
 };
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
 static struct omap2_mcspi_platform_config omap2_mcspi3_config = {
 	.num_cs		= 2,
@@ -400,7 +400,7 @@ static inline void omap4_mcspi_fixup(void)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
 static inline void omap2_mcspi3_init(void)
 {
@@ -895,7 +895,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
 #define OMAP_HDQ_BASE	0x480B2000
 #endif
 static struct resource omap_hdq_resources[] = {

arch/arm/mach-omap2/id.c

@@ -191,12 +191,19 @@ static void __init omap3_check_features(void)
 	if (!cpu_is_omap3505() && !cpu_is_omap3517())
 		omap3_features |= OMAP3_HAS_IO_WAKEUP;
 
+	omap3_features |= OMAP3_HAS_SDRC;
+
 	/*
 	 * TODO: Get additional info (where applicable)
 	 *       e.g. Size of L2 cache.
 	 */
 }
 
+static void __init ti816x_check_features(void)
+{
+	omap3_features = OMAP3_HAS_NEON;
+}
+
 static void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
@@ -287,6 +294,20 @@ static void __init omap3_check_revision(void)
 			omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
 		}
 		break;
+	case 0xb81e:
+		omap_chip.oc = CHIP_IS_TI816X;
+
+		switch (rev) {
+		case 0:
+			omap_revision = TI8168_REV_ES1_0;
+			break;
+		case 1:
+			omap_revision = TI8168_REV_ES1_1;
+			break;
+		default:
+			omap_revision =  TI8168_REV_ES1_1;
+		}
+		break;
 	default:
 		/* Unknown default to latest silicon rev as default*/
 		omap_revision =  OMAP3630_REV_ES1_2;
@@ -372,6 +393,8 @@ static void __init omap3_cpuinfo(void)
 			/* Already set in omap3_check_revision() */
 			strcpy(cpu_name, "AM3505");
 		}
+	} else if (cpu_is_ti816x()) {
+		strcpy(cpu_name, "TI816X");
 	} else if (omap3_has_iva() && omap3_has_sgx()) {
 		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
 		strcpy(cpu_name, "OMAP3430/3530");
@@ -386,7 +409,7 @@ static void __init omap3_cpuinfo(void)
 		strcpy(cpu_name, "OMAP3503");
 	}
 
-	if (cpu_is_omap3630()) {
+	if (cpu_is_omap3630() || cpu_is_ti816x()) {
 		switch (rev) {
 		case OMAP_REVBITS_00:
 			strcpy(cpu_rev, "1.0");
@@ -462,7 +485,13 @@ void __init omap2_check_revision(void)
 		omap24xx_check_revision();
 	} else if (cpu_is_omap34xx()) {
 		omap3_check_revision();
-		omap3_check_features();
+
+		/* TI816X doesn't have feature register */
+		if (!cpu_is_ti816x())
+			omap3_check_features();
+		else
+			ti816x_check_features();
+
 		omap3_cpuinfo();
 		return;
 	} else if (cpu_is_omap44xx()) {

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -69,6 +69,12 @@ omap_uart_lsr:	.word	0
 		beq	34f			@ configure OMAP3UART4
 		cmp	\rp, #OMAP4UART4	@ only on 44xx
 		beq	44f			@ configure OMAP4UART4
+		cmp	\rp, #TI816XUART1	@ ti816x UART offsets different
+		beq	81f			@ configure UART1
+		cmp	\rp, #TI816XUART2	@ ti816x UART offsets different
+		beq	82f			@ configure UART2
+		cmp	\rp, #TI816XUART3	@ ti816x UART offsets different
+		beq	83f			@ configure UART3
 		cmp	\rp, #ZOOM_UART		@ only on zoom2/3
 		beq	95f			@ configure ZOOM_UART
 
@@ -91,6 +97,12 @@ omap_uart_lsr:	.word	0
 		b	98f
 44:		mov	\rp, #UART_OFFSET(OMAP4_UART4_BASE)
 		b	98f
+81:		mov	\rp, #UART_OFFSET(TI816X_UART1_BASE)
+		b	98f
+82:		mov	\rp, #UART_OFFSET(TI816X_UART2_BASE)
+		b	98f
+83:		mov	\rp, #UART_OFFSET(TI816X_UART3_BASE)
+		b	98f
 95:		ldr	\rp, =ZOOM_UART_BASE
 		mrc	p15, 0, \rv, c1, c0
 		tst	\rv, #1			@ MMU enabled?

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -61,6 +61,14 @@
 		bne	9998f
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
+		bne	9998f
+
+		/*
+		 * ti816x has additional IRQ pending register. Checking this
+		 * register on omap2 & omap3 has no effect (read as 0).
+		 */
+		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
+		cmp	\irqnr, #0x0
 9998:
 		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
@@ -133,6 +141,11 @@
 		bne	9999f
 		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
 		cmp	\irqnr, #0x0
+#ifdef CONFIG_SOC_OMAPTI816X
+		bne	9999f
+		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
+		cmp	\irqnr, #0x0
+#endif
 9999:
 		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
 		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */

arch/arm/mach-omap2/io.c

@@ -66,7 +66,7 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
 	},
 };
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 static struct map_desc omap242x_io_desc[] __initdata = {
 	{
 		.virtual	= DSP_MEM_2420_VIRT,
@@ -90,7 +90,7 @@ static struct map_desc omap242x_io_desc[] __initdata = {
 
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 static struct map_desc omap243x_io_desc[] __initdata = {
 	{
 		.virtual	= L4_WK_243X_VIRT,
@@ -175,6 +175,18 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 #endif
 };
 #endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+static struct map_desc omapti816x_io_desc[] __initdata = {
+	{
+		.virtual	= L4_34XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
+		.length		= L4_34XX_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+#endif
+
 #ifdef	CONFIG_ARCH_OMAP4
 static struct map_desc omap44xx_io_desc[] __initdata = {
 	{
@@ -241,7 +253,7 @@ static void __init _omap2_map_common_io(void)
 	omap_sram_init();
 }
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
@@ -250,7 +262,7 @@ void __init omap242x_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 void __init omap243x_map_common_io(void)
 {
 	iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
@@ -267,6 +279,14 @@ void __init omap34xx_map_common_io(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAPTI816X
+void __init omapti816x_map_common_io(void)
+{
+	iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
+	_omap2_map_common_io();
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 void __init omap44xx_map_common_io(void)
 {
@@ -398,11 +418,7 @@ void __init omap2_init_common_infrastructure(void)
 void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
 {
-	omap_serial_early_init();
-
-	omap_hwmod_late_init();
-
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+	if (cpu_is_omap24xx() || omap3_has_sdrc()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
 	}

arch/arm/mach-omap2/irq.c

@@ -61,8 +61,6 @@ struct omap3_intc_regs {
 	u32 mir[INTCPS_NR_MIR_REGS];
 };
 
-static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
-
 /* INTC bank register get/set */
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
@@ -110,7 +108,7 @@ static void omap_mask_irq(struct irq_data *d)
 	unsigned int irq = d->irq;
 	int offset = irq & (~(IRQ_BITS_PER_REG - 1));
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
 		int spurious = 0;
 
 		/*
@@ -205,6 +203,9 @@ void __init omap_init_irq(void)
 
 		BUG_ON(!base);
 
+		if (cpu_is_ti816x())
+			bank->nr_irqs = 128;
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {
@@ -229,6 +230,8 @@ void __init omap_init_irq(void)
 }
 
 #ifdef CONFIG_ARCH_OMAP3
+static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
+
 void omap_intc_save_context(void)
 {
 	int ind = 0, i = 0;

arch/arm/mach-omap2/mailbox.c

@@ -310,7 +310,7 @@ struct omap_mbox mbox_dsp_info = {
 struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {

arch/arm/mach-omap2/mcbsp.c

@@ -104,7 +104,7 @@ EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
 
 /* Platform data */
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP24XX_MCBSP1_BASE,
@@ -129,7 +129,7 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 #define OMAP2420_MCBSP_REG_NUM		0
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 	{
 		.phys_base	= OMAP24XX_MCBSP1_BASE,

arch/arm/mach-omap2/omap_hwmod.c

@@ -1467,12 +1467,10 @@ static int __init _register(struct omap_hwmod *oh)
 		return -EEXIST;
 
 	ms_id = _find_mpu_port_index(oh);
-	if (!IS_ERR_VALUE(ms_id)) {
+	if (!IS_ERR_VALUE(ms_id))
 		oh->_mpu_port_index = ms_id;
-		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-	} else {
+	else
 		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
-	}
 
 	list_add_tail(&oh->node, &omap_hwmod_list);
 
@@ -1621,6 +1619,26 @@ int __init omap_hwmod_init(struct omap_hwmod **ohs)
 	return 0;
 }
 
+/*
+ * _populate_mpu_rt_base - populate the virtual address for a hwmod
+ *
+ * Must be called only from omap_hwmod_late_init so ioremap works properly.
+ * Assumes the caller takes care of locking if needed.
+ *
+ */
+static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
+{
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return 0;
+
+	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+	if (!oh->_mpu_rt_va)
+		pr_warning("omap_hwmod: %s found no _mpu_rt_va for %s\n",
+				__func__, oh->name);
+
+	return 0;
+}
+
 /**
  * omap_hwmod_late_init - do some post-clock framework initialization
  *
@@ -1628,10 +1646,12 @@ int __init omap_hwmod_init(struct omap_hwmod **ohs)
  * to struct clk pointers for each registered omap_hwmod.  Also calls
  * _setup() on each hwmod.  Returns 0.
  */
-int omap_hwmod_late_init(void)
+static int __init omap_hwmod_late_init(void)
 {
 	int r;
 
+	r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
+
 	/* XXX check return value */
 	r = omap_hwmod_for_each(_init_clocks, NULL);
 	WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n");
@@ -1644,6 +1664,7 @@ int omap_hwmod_late_init(void)
 
 	return 0;
 }
+core_initcall(omap_hwmod_late_init);
 
 /**
  * omap_hwmod_enable - enable an omap_hwmod

arch/arm/mach-omap2/opp2xxx.h

@@ -418,7 +418,7 @@ struct prcm_config {
 
 extern const struct prcm_config omap2420_rate_table[];
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 extern const struct prcm_config omap2430_rate_table[];
 #else
 #define omap2430_rate_table	NULL

arch/arm/mach-omap2/powerdomains2xxx_data.c

@@ -78,7 +78,7 @@ static struct powerdomain core_24xx_pwrdm = {
  * 2430-specific powerdomains
  */
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 
 /* XXX 2430 KILLDOMAINWKUP bit?  No current users apparently */
 
@@ -97,7 +97,7 @@ static struct powerdomain mdm_pwrdm = {
 	},
 };
 
-#endif     /* CONFIG_ARCH_OMAP2430 */
+#endif     /* CONFIG_SOC_OMAP2430 */
 
 /* As powerdomains are added or removed above, this list must also be changed */
 static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
@@ -111,7 +111,7 @@ static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
 	&core_24xx_pwrdm,
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 	&mdm_pwrdm,
 #endif
 	NULL

arch/arm/mach-omap2/prcm.c

@@ -24,6 +24,7 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
+#include <mach/system.h>
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
@@ -57,7 +58,7 @@ u32 omap_prcm_get_reset_sources(void)
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
-void omap_prcm_arch_reset(char mode, const char *cmd)
+static void omap_prcm_arch_reset(char mode, const char *cmd)
 {
 	s16 prcm_offs = 0;
 
@@ -108,6 +109,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 	omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
 }
 
+void (*arch_reset)(char, const char *) = omap_prcm_arch_reset;
+
 /**
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
  * @reg: physical address of module IDLEST register

arch/arm/mach-omap2/serial.c

@@ -486,7 +486,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
 		u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
 		u32 wk_mask = 0;
 		u32 padconf = 0;
@@ -655,7 +655,7 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
 }
 #endif
 
-void __init omap_serial_early_init(void)
+static int __init omap_serial_early_init(void)
 {
 	int i = 0;
 
@@ -672,7 +672,7 @@ void __init omap_serial_early_init(void)
 
 		uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
 		if (WARN_ON(!uart))
-			return;
+			return -ENODEV;
 
 		uart->oh = oh;
 		uart->num = i++;
@@ -691,7 +691,10 @@ void __init omap_serial_early_init(void)
 		 */
 		uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
 	} while (1);
+
+	return 0;
 }
+core_initcall(omap_serial_early_init);
 
 /**
  * omap_serial_init_port() - initialize single serial port
@@ -759,13 +762,13 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	p->private_data = uart;
 
 	/*
-	 * omap44xx: Never read empty UART fifo
+	 * omap44xx, ti816x: Never read empty UART fifo
 	 * omap3xxx: Never read empty UART fifo on UARTs
 	 * with IP rev >=0x52
 	 */
 	uart->regshift = p->regshift;
 	uart->membase = p->membase;
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx() || cpu_is_ti816x())
 		uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
 	else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
 			>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
@@ -847,7 +850,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	}
 
 	/* Enable the MDR1 errata for OMAP3 */
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx() && !cpu_is_ti816x())
 		uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
 }
 

arch/arm/plat-omap/common.c

@@ -24,10 +24,11 @@
 
 #define NO_LENGTH_CHECK 0xffffffff
 
-struct omap_board_config_kernel *omap_board_config;
+struct omap_board_config_kernel *omap_board_config __initdata;
 int omap_board_config_size;
 
-static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
+static const void *__init get_config(u16 tag, size_t len,
+		int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
 	int i;
@@ -49,17 +50,15 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 	return kinfo->data;
 }
 
-const void *__omap_get_config(u16 tag, size_t len, int nr)
+const void *__init __omap_get_config(u16 tag, size_t len, int nr)
 {
         return get_config(tag, len, nr, NULL);
 }
-EXPORT_SYMBOL(__omap_get_config);
 
-const void *omap_get_var_config(u16 tag, size_t *len)
+const void *__init omap_get_var_config(u16 tag, size_t *len)
 {
         return get_config(tag, NO_LENGTH_CHECK, 0, len);
 }
-EXPORT_SYMBOL(omap_get_var_config);
 
 void __init omap_reserve(void)
 {

arch/arm/plat-omap/counter_32k.c

@@ -54,7 +54,7 @@ static cycle_t notrace omap16xx_32k_read(struct clocksource *cs)
 #define omap16xx_32k_read	NULL
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
@@ -63,7 +63,7 @@ static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
 #define omap2420_32k_read	NULL
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 static cycle_t notrace omap2430_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;

arch/arm/plat-omap/dma.c

@@ -134,7 +134,7 @@ static inline void omap_enable_channel_irq(int lch);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
-int omap_dma_in_1510_mode(void)
+static int omap_dma_in_1510_mode(void)
 {
 	return enable_1510_mode;
 }

arch/arm/plat-omap/i2c.c

@@ -112,6 +112,7 @@ static inline int omap1_i2c_add_bus(int bus_id)
 }
 
 
+#ifdef CONFIG_ARCH_OMAP2PLUS
 /*
  * XXX This function is a temporary compatibility wrapper - only
  * needed until the I2C driver can be converted to call
@@ -130,7 +131,6 @@ static struct omap_device_pm_latency omap_i2c_latency[] = {
 	},
 };
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;

arch/arm/plat-omap/include/plat/board.h

@@ -151,14 +151,14 @@ struct omap_board_config_kernel {
 	const void *data;
 };
 
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
 
 #define omap_get_config(tag, type) \
 	((const type *) __omap_get_config((tag), sizeof(type), 0))
 #define omap_get_nr_config(tag, type, nr) \
 	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
 
-extern const void *omap_get_var_config(u16 tag, size_t *len);
+extern const void *__init omap_get_var_config(u16 tag, size_t *len);
 
 extern struct omap_board_config_kernel *omap_board_config;
 extern int omap_board_config_size;

arch/arm/plat-omap/include/plat/clkdev_omap.h

@@ -38,6 +38,7 @@ struct omap_clk {
 #define CK_3517		(1 << 9)
 #define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
 #define CK_443X		(1 << 11)
+#define CK_TI816X	(1 << 12)
 
 
 #define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)

arch/arm/plat-omap/include/plat/clock.h

@@ -53,6 +53,7 @@ struct clkops {
 #define RATE_IN_3430ES2PLUS	(1 << 3)	/* 3430 ES >= 2 rates only */
 #define RATE_IN_36XX		(1 << 4)
 #define RATE_IN_4430		(1 << 5)
+#define RATE_IN_TI816X		(1 << 6)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 #define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)

arch/arm/plat-omap/include/plat/common.h

@@ -66,6 +66,7 @@ void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_3xxx(void);
 void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);

arch/arm/plat-omap/include/plat/cpu.h

@@ -105,6 +105,12 @@ static inline int is_omap ##subclass (void)		\
 	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
 }
 
+#define IS_TI_SUBCLASS(subclass, id)			\
+static inline int is_ti ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(7xx, 0x07)
 IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
@@ -118,6 +124,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
 IS_OMAP_SUBCLASS(363x, 0x363)
 IS_OMAP_SUBCLASS(443x, 0x443)
 
+IS_TI_SUBCLASS(816x, 0x816)
+
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
 #define cpu_is_omap16xx()		0
@@ -126,6 +134,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #define cpu_is_omap243x()		0
 #define cpu_is_omap34xx()		0
 #define cpu_is_omap343x()		0
+#define cpu_is_ti816x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 
@@ -170,11 +179,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		is_omap24xx()
 # endif
-# if defined (CONFIG_ARCH_OMAP2420)
+# if defined (CONFIG_SOC_OMAP2420)
 #  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		is_omap242x()
 # endif
-# if defined (CONFIG_ARCH_OMAP2430)
+# if defined (CONFIG_SOC_OMAP2430)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		is_omap243x()
 # endif
@@ -189,11 +198,11 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP2420)
+# if defined(CONFIG_SOC_OMAP2420)
 #  undef  cpu_is_omap242x
 #  define cpu_is_omap242x()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP2430)
+# if defined(CONFIG_SOC_OMAP2430)
 #  undef  cpu_is_omap243x
 #  define cpu_is_omap243x()		1
 # endif
@@ -201,7 +210,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  undef  cpu_is_omap34xx
 #  define cpu_is_omap34xx()		1
 # endif
-# if defined(CONFIG_ARCH_OMAP3430)
+# if defined(CONFIG_SOC_OMAP3430)
 #  undef  cpu_is_omap343x
 #  define cpu_is_omap343x()		1
 # endif
@@ -330,6 +339,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # undef cpu_is_omap3530
 # undef cpu_is_omap3505
 # undef cpu_is_omap3517
+# undef cpu_is_ti816x
 # define cpu_is_omap3430()		is_omap3430()
 # define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
 						(!omap3_has_iva()) &&	\
@@ -345,6 +355,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap3517()		is_omap3517()
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
+# define cpu_is_ti816x()		is_ti816x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
@@ -389,6 +400,10 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
 #define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
 
+#define TI816X_CLASS		0x81600034
+#define TI8168_REV_ES1_0	TI816X_CLASS
+#define TI8168_REV_ES1_1	(TI816X_CLASS | (OMAP_REVBITS_01 << 8))
+
 #define OMAP443X_CLASS		0x44300044
 #define OMAP4430_REV_ES1_0	OMAP443X_CLASS
 #define OMAP4430_REV_ES2_0	0x44301044
@@ -419,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define CHIP_IS_OMAP3630ES1_1           (1 << 9)
 #define CHIP_IS_OMAP3630ES1_2           (1 << 10)
 #define CHIP_IS_OMAP4430ES2		(1 << 11)
+#define CHIP_IS_TI816X			(1 << 14)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
@@ -455,6 +471,7 @@ extern u32 omap3_features;
 #define OMAP3_HAS_ISP			BIT(4)
 #define OMAP3_HAS_192MHZ_CLK		BIT(5)
 #define OMAP3_HAS_IO_WAKEUP		BIT(6)
+#define OMAP3_HAS_SDRC			BIT(7)
 
 #define OMAP3_HAS_FEATURE(feat,flag)			\
 static inline unsigned int omap3_has_ ##feat(void)	\
@@ -469,5 +486,6 @@ OMAP3_HAS_FEATURE(neon, NEON)
 OMAP3_HAS_FEATURE(isp, ISP)
 OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
 OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
+OMAP3_HAS_FEATURE(sdrc, SDRC)
 
 #endif

arch/arm/plat-omap/include/plat/fpga.h

@@ -30,18 +30,18 @@ extern void omap1510_fpga_init_irq(void);
  * ---------------------------------------------------------------------------
  */
 /* maps in the FPGA registers and the ETHR registers */
-#define H2P2_DBG_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
 #define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
 #define H2P2_DBG_FPGA_START		0x04000000		/* PA */
 
 #define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
-#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
-#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
-#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
-#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
-#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
-#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
-#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
 
 /* NOTE:  most boards don't have a static mapping for the FPGA ... */
 struct h2p2_dbg_fpga {
@@ -81,55 +81,55 @@ struct h2p2_dbg_fpga {
  *  OMAP-1510 FPGA
  * ---------------------------------------------------------------------------
  */
-#define OMAP1510_FPGA_BASE		IOMEM(0xE8000000)	/* VA */
+#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
 #define OMAP1510_FPGA_SIZE		SZ_4K
 #define OMAP1510_FPGA_START		0x08000000		/* PA */
 
 /* Revision */
-#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
-#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
 
-#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
-#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
-#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
-#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
 
 /* Interrupt status */
-#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
-#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
 
 /* Interrupt mask */
-#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
-#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
 
 /* Reset registers */
-#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
-#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
-
-#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
-#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
-#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
-#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
-#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
-#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
-#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
-#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
-#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
-#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
-
-#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
-
-#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
-#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
-#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
-#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
-#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
-#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
-#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
-#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
-#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
-#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
-#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
 
 #define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
 

arch/arm/plat-omap/include/plat/hardware.h

@@ -286,5 +286,6 @@
 #include <plat/omap24xx.h>
 #include <plat/omap34xx.h>
 #include <plat/omap44xx.h>
+#include <plat/ti816x.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */

arch/arm/plat-omap/include/plat/io.h

@@ -259,7 +259,7 @@ struct omap_sdrc_params;
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 extern void omap242x_map_common_io(void);
 #else
 static inline void omap242x_map_common_io(void)
@@ -267,7 +267,7 @@ static inline void omap242x_map_common_io(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 extern void omap243x_map_common_io(void);
 #else
 static inline void omap243x_map_common_io(void)
@@ -283,6 +283,14 @@ static inline void omap34xx_map_common_io(void)
 }
 #endif
 
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 extern void omap44xx_map_common_io(void);
 #else

arch/arm/plat-omap/include/plat/mcbsp.h

@@ -106,13 +106,6 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 #define OMAP_MCBSP_REG_XCCR	0x00
 #define OMAP_MCBSP_REG_RCCR	0x00
 
-#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP1
-#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
-
 #else
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -168,13 +161,6 @@ static struct platform_device omap_mcbsp##port_nr = {	\
 #define OMAP_ST_REG_SFIRCR	0x28
 #define OMAP_ST_REG_SSELCR	0x2C
 
-#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP2
-#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
-
 #endif
 
 /************************** McBSP SPCR1 bit definitions ***********************/

arch/arm/plat-omap/include/plat/multi.h

@@ -66,7 +66,7 @@
 #  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
@@ -74,7 +74,7 @@
 #  define OMAP_NAME omap2420
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -539,7 +539,6 @@ int omap_hwmod_init(struct omap_hwmod **ohs);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
-int omap_hwmod_late_init(void);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
 int _omap_hwmod_enable(struct omap_hwmod *oh);

arch/arm/plat-omap/include/plat/prcm.h

@@ -28,7 +28,6 @@
 #define __ASM_ARM_ARCH_OMAP_PRCM_H
 
 u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode, const char *cmd);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			 const char *name);
 

arch/arm/plat-omap/include/plat/serial.h

@@ -51,6 +51,11 @@
 #define OMAP4_UART3_BASE	0x48020000
 #define OMAP4_UART4_BASE	0x4806e000
 
+/* TI816X serial ports */
+#define TI816X_UART1_BASE	0x48020000
+#define TI816X_UART2_BASE	0x48022000
+#define TI816X_UART3_BASE	0x48024000
+
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
 #define ZOOM_UART_VIRT		0xfa400000
@@ -81,6 +86,9 @@
 #define OMAP4UART2		OMAP2UART2
 #define OMAP4UART3		43
 #define OMAP4UART4		44
+#define TI816XUART1		81
+#define TI816XUART2		82
+#define TI816XUART3		83
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
 /* This is only used by 8250.c for omap1510 */
@@ -96,7 +104,6 @@
 
 struct omap_board_data;
 
-extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
 extern void omap_serial_init_port(struct omap_board_data *bdata);
 extern int omap_uart_can_sleep(void);

arch/arm/plat-omap/include/plat/system.h

@@ -4,48 +4,14 @@
  */
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
 
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <plat/prcm.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#else
-extern void voiceblue_reset(void);
-#endif
+#include <asm/proc-fns.h>
 
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void omap1_arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode, cmd);
-	else
-		omap_prcm_arch_reset(mode, cmd);
-}
+extern void (*arch_reset)(char, const char *);
 
 #endif

arch/arm/plat-omap/include/plat/ti816x.h

+/*
+ * This file contains the address data for various TI816X modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI816X_H
+#define __ASM_ARCH_TI816X_H
+
+#define L4_SLOW_TI816X_BASE	0x48000000
+
+#define TI816X_SCM_BASE		0x48140000
+#define TI816X_CTRL_BASE	TI816X_SCM_BASE
+#define TI816X_PRCM_BASE	0x48180000
+
+#define TI816X_ARM_INTC_BASE	0x48200000
+
+#endif /* __ASM_ARCH_TI816X_H */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -93,6 +93,10 @@ static inline void flush(void)
 #define DEBUG_LL_ZOOM(mach)						\
 	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
+#define DEBUG_LL_TI816X(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		TI816XUART##p)
+
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
 	int port = 0;
@@ -166,6 +170,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_ZOOM(omap_zoom2);
 		DEBUG_LL_ZOOM(omap_zoom3);
 
+		/* TI8168 base boards using UART3 */
+		DEBUG_LL_TI816X(3, ti8168evm);
+
 	} while (0);
 }
 

arch/arm/plat-omap/io.c

@@ -85,7 +85,10 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_omap34xx()) {
+	if (cpu_is_ti816x()) {
+		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
+			return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
+	} else if (cpu_is_omap34xx()) {
 		if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE))
 			return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
 		if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))

arch/arm/plat-omap/sram.c

@@ -312,7 +312,7 @@ u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2420
+#ifdef CONFIG_SOC_OMAP2420
 static int __init omap242x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
@@ -333,7 +333,7 @@ static inline int omap242x_sram_init(void)
 }
 #endif
 
-#ifdef CONFIG_ARCH_OMAP2430
+#ifdef CONFIG_SOC_OMAP2430
 static int __init omap243x_sram_init(void)
 {
 	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,

drivers/mmc/host/Kconfig

@@ -225,7 +225,7 @@ config MMC_OMAP
 
 config MMC_OMAP_HS
 	tristate "TI OMAP High Speed Multimedia Card Interface support"
-	depends on ARCH_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
+	depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
 	  If you have an OMAP2430 or OMAP3 board or OMAP4 board with a

drivers/spi/omap2_mcspi.c

@@ -1111,7 +1111,7 @@ static u8 __initdata spi2_txdma_id[] = {
 	OMAP24XX_DMA_SPI2_TX1,
 };
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
 	|| defined(CONFIG_ARCH_OMAP4)
 static u8 __initdata spi3_rxdma_id[] = {
 	OMAP24XX_DMA_SPI3_RX0,
@@ -1154,7 +1154,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
 		txdma_id = spi2_txdma_id;
 		num_chipselect = 2;
 		break;
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
 	|| defined(CONFIG_ARCH_OMAP4)
 	case 3:
 		rxdma_id = spi3_rxdma_id;

drivers/usb/musb/musb_core.c

@@ -1530,7 +1530,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430) || \
 	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
 	defined(CONFIG_ARCH_U5500)
 

drivers/usb/musb/musb_core.h

@@ -212,8 +212,8 @@ enum musb_g_ep0_state {
  * directly with the "flat" model, or after setting up an index register.
  */
 
-#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_ARCH_OMAP2430) \
-		|| defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_BLACKFIN) \
+#if defined(CONFIG_ARCH_DAVINCI) || defined(CONFIG_SOC_OMAP2430) \
+		|| defined(CONFIG_SOC_OMAP3430) || defined(CONFIG_BLACKFIN) \
 		|| defined(CONFIG_ARCH_OMAP4)
 /* REVISIT indexed access seemed to
  * misbehave (on DaVinci) for at least peripheral IN ...
@@ -358,7 +358,7 @@ struct musb_csr_regs {
 
 struct musb_context_registers {
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
     defined(CONFIG_ARCH_OMAP4)
 	u32 otg_sysconfig, otg_forcestandby;
 #endif

drivers/usb/musb/musbhsdma.h

@@ -31,7 +31,7 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
 #include "omap2430.h"
 #endif
 

drivers/usb/otg/isp1301_omap.c

@@ -1510,7 +1510,7 @@ isp1301_start_hnp(struct otg_transceiver *dev)
 
 /*-------------------------------------------------------------------------*/
 
-static int __init
+static int __devinit
 isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 {
 	int			status;

drivers/w1/masters/Kconfig

@@ -60,7 +60,7 @@ config W1_MASTER_GPIO
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
-	depends on ARCH_OMAP2430 || ARCH_OMAP3
+	depends on SOC_OMAP2430 || ARCH_OMAP3
 	help
 	  Say Y here if you want support for the 1-wire or HDQ Interface
 	  on an OMAP processor.

sound/soc/omap/omap-mcbsp.c

@@ -92,7 +92,7 @@ static const unsigned long omap1_mcbsp_port[][2] = {};
 static const int omap24xx_dma_reqs[][2] = {
 	{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
 	{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
 	{ OMAP24XX_DMA_MCBSP3_TX, OMAP24XX_DMA_MCBSP3_RX },
 	{ OMAP24XX_DMA_MCBSP4_TX, OMAP24XX_DMA_MCBSP4_RX },
 	{ OMAP24XX_DMA_MCBSP5_TX, OMAP24XX_DMA_MCBSP5_RX },
@@ -113,7 +113,7 @@ static const int omap44xx_dma_reqs[][2] = {
 static const int omap44xx_dma_reqs[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 static const unsigned long omap2420_mcbsp_port[][2] = {
 	{ OMAP24XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1,
 	  OMAP24XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1 },
@@ -124,7 +124,7 @@ static const unsigned long omap2420_mcbsp_port[][2] = {
 static const unsigned long omap2420_mcbsp_port[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP2430)
+#if defined(CONFIG_SOC_OMAP2430)
 static const unsigned long omap2430_mcbsp_port[][2] = {
 	{ OMAP24XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR,
 	  OMAP24XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR },

sound/soc/omap/omap-mcbsp.h

@@ -43,7 +43,7 @@ enum omap_mcbsp_div {
 	OMAP_MCBSP_CLKGDV,		/* Sample rate generator divider */
 };
 
-#if defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_SOC_OMAP2420)
 #define NUM_LINKS	2
 #endif
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
@@ -54,7 +54,7 @@ enum omap_mcbsp_div {
 #undef  NUM_LINKS
 #define NUM_LINKS	4
 #endif
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_OMAP2430)
 #undef  NUM_LINKS
 #define NUM_LINKS	5
 #endif