Commit 9358c693 authored by Olivier Galibert's avatar Olivier Galibert Committed by Andi Kleen

[PATCH] mmconfig: Detect and support the E7520 and the 945G/GZ/P/PL

It seems that the only way to reliably support mmconfig in the presence of
funky biosen is to detect the hostbridge and read where the window is mapped
from its registers.  Do that for the E7520 and the 945G/GZ/P/PL for a start.
Signed-off-by: default avatarOlivier Galibert <galibert@pobox.com>
Signed-off-by: default avatarAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
parent 5f027387
......@@ -3,6 +3,7 @@
* MMCONFIG - common code between i386 and x86-64.
*
* This code does:
* - known chipset handling
* - ACPI decoding and validation
*
* Per-architecture code takes care of the mappings and accesses
......@@ -55,12 +56,128 @@ static __init void unreachable_devices(void)
}
}
static __init const char *pci_mmcfg_e7520(void)
{
u32 win;
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0xce, 2, &win);
pci_mmcfg_config_num = 1;
pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
if (!pci_mmcfg_config)
return NULL;
pci_mmcfg_config[0].address = (win & 0xf000) << 16;
pci_mmcfg_config[0].pci_segment = 0;
pci_mmcfg_config[0].start_bus_number = 0;
pci_mmcfg_config[0].end_bus_number = 255;
return "Intel Corporation E7520 Memory Controller Hub";
}
static __init const char *pci_mmcfg_intel_945(void)
{
u32 pciexbar, mask = 0, len = 0;
pci_mmcfg_config_num = 1;
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0x48, 4, &pciexbar);
/* Enable bit */
if (!(pciexbar & 1))
pci_mmcfg_config_num = 0;
/* Size bits */
switch ((pciexbar >> 1) & 3) {
case 0:
mask = 0xf0000000U;
len = 0x10000000U;
break;
case 1:
mask = 0xf8000000U;
len = 0x08000000U;
break;
case 2:
mask = 0xfc000000U;
len = 0x04000000U;
break;
default:
pci_mmcfg_config_num = 0;
}
/* Errata #2, things break when not aligned on a 256Mb boundary */
/* Can only happen in 64M/128M mode */
if ((pciexbar & mask) & 0x0fffffffU)
pci_mmcfg_config_num = 0;
if (pci_mmcfg_config_num) {
pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
if (!pci_mmcfg_config)
return NULL;
pci_mmcfg_config[0].address = pciexbar & mask;
pci_mmcfg_config[0].pci_segment = 0;
pci_mmcfg_config[0].start_bus_number = 0;
pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
}
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
struct pci_mmcfg_hostbridge_probe {
u32 vendor;
u32 device;
const char *(*probe)(void);
};
static __initdata struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, pci_mmcfg_e7520 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82945G_HB, pci_mmcfg_intel_945 },
};
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
u16 vendor, device;
int i;
const char *name;
pci_conf1_read(0, 0, PCI_DEVFN(0,0), 0, 4, &l);
vendor = l & 0xffff;
device = (l >> 16) & 0xffff;
pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL;
name = NULL;
for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++)
if ((pci_mmcfg_probes[i].vendor == PCI_ANY_ID ||
pci_mmcfg_probes[i].vendor == vendor) &&
(pci_mmcfg_probes[i].device == PCI_ANY_ID ||
pci_mmcfg_probes[i].device == device))
name = pci_mmcfg_probes[i].probe();
if (name) {
if (pci_mmcfg_config_num)
printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", name);
else
printk(KERN_INFO "PCI: Found %s without MMCONFIG support.\n",
name);
}
return name != NULL;
}
void __init pci_mmcfg_init(int type)
{
int known_bridge = 0;
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if (type == 1 && pci_mmcfg_check_hostbridge())
known_bridge = 1;
if (!known_bridge)
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
......@@ -69,7 +186,7 @@ void __init pci_mmcfg_init(int type)
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
if (type == 1 &&
if (type == 1 && !known_bridge &&
!e820_all_mapped(pci_mmcfg_config[0].address,
pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment