CRISv32: Add GPIO driver to the default configs

Fix a number of small issues visible when GPIO is enabled:

- Correct missing default for !ETRAXFS in Kconfig
- Remove information on number of bits for some Kconfigs
  related to the GPIO, they are different in ETRAX FS and ARTPEC-3
- Fix compile warning in ARTPEC-3 GPIO driver
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>

arch/cris/arch-v32/drivers/Kconfig

@@ -202,7 +202,7 @@ config ETRAX_PA_CHANGEABLE_DIR
 	default "0x00" if ETRAXFS
 	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (8 bits) with information of what bits in PA that a
+	  This is a bitmask with information of what bits in PA that a
 	  user can change direction on using ioctl's.
 	  Bit set = changeable.
 	  You probably want 0 here, but it depends on your hardware.
@@ -213,7 +213,7 @@ config ETRAX_PA_CHANGEABLE_BITS
 	default "0x00" if ETRAXFS
 	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (8 bits) with information of what bits in PA
+	  This is a bitmask with information of what bits in PA
 	  that a user can change the value on using ioctl's.
 	  Bit set = changeable.
 
@@ -223,7 +223,7 @@ config ETRAX_PB_CHANGEABLE_DIR
 	default "0x00000" if ETRAXFS
 	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (18 bits) with information of what bits in PB
+	  This is a bitmask with information of what bits in PB
 	  that a user can change direction on using ioctl's.
 	  Bit set = changeable.
 	  You probably want 0 here, but it depends on your hardware.
@@ -234,7 +234,7 @@ config ETRAX_PB_CHANGEABLE_BITS
 	default "0x00000" if ETRAXFS
 	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (18 bits) with information of what bits in PB
+	  This is a bitmask with information of what bits in PB
 	  that a user can change the value on using ioctl's.
 	  Bit set = changeable.
 
@@ -244,7 +244,7 @@ config ETRAX_PC_CHANGEABLE_DIR
 	default "0x00000" if ETRAXFS
 	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (18 bits) with information of what bits in PC
+	  This is a bitmask with information of what bits in PC
 	  that a user can change direction on using ioctl's.
 	  Bit set = changeable.
 	  You probably want 0 here, but it depends on your hardware.
@@ -253,9 +253,9 @@ config ETRAX_PC_CHANGEABLE_BITS
 	hex "PC user changeable bits mask"
 	depends on ETRAX_GPIO
 	default "0x00000" if ETRAXFS
-	default "0x00000000" if ETRAXFS
+	default "0x00000000" if !ETRAXFS
 	help
-	  This is a bitmask (18 bits) with information of what bits in PC
+	  This is a bitmask with information of what bits in PC
 	  that a user can change the value on using ioctl's.
 	  Bit set = changeable.
 
@@ -264,7 +264,7 @@ config ETRAX_PD_CHANGEABLE_DIR
 	depends on ETRAX_GPIO && ETRAXFS
 	default "0x00000"
 	help
-	  This is a bitmask (18 bits) with information of what bits in PD
+	  This is a bitmask with information of what bits in PD
 	  that a user can change direction on using ioctl's.
 	  Bit set = changeable.
 	  You probably want 0x00000 here, but it depends on your hardware.

arch/cris/arch-v32/drivers/mach-a3/gpio.c

@@ -957,7 +957,7 @@ static void __init virtual_gpio_init(void)
 
 static int __init gpio_init(void)
 {
-	int res;
+	int res, res2;
 
 	printk(KERN_INFO "ETRAX FS GPIO driver v2.7, (c) 2003-2008 "
 		"Axis Communications AB\n");
@@ -977,7 +977,7 @@ static int __init gpio_init(void)
 	CRIS_LED_DISK_READ(0);
 	CRIS_LED_DISK_WRITE(0);
 
-	int res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
+	res2 = request_irq(GIO_INTR_VECT, gpio_interrupt,
 		IRQF_SHARED, "gpio", &alarmlist);
 	if (res2) {
 		printk(KERN_ERR "err: irq for gpio\n");

arch/cris/configs/artpec_3_defconfig

@@ -12,10 +12,6 @@ CONFIG_ETRAX_FAST_TIMER=y
 CONFIG_CRIS_MACH_ARTPEC3=y
 CONFIG_ETRAX_DRAM_SIZE=32
 CONFIG_ETRAX_FLASH1_SIZE=4
-CONFIG_ETRAX_DEF_GIO_PA_OE=1c
-CONFIG_ETRAX_DEF_GIO_PA_OUT=00
-CONFIG_ETRAX_DEF_GIO_PB_OE=00000
-CONFIG_ETRAX_DEF_GIO_PB_OUT=00000
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -42,3 +38,4 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+CONFIG_ETRAX_GPIO=y

arch/cris/configs/etraxfs_defconfig

@@ -38,3 +38,4 @@ CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+CONFIG_ETRAX_GPIO=y