Commit 94a78b79 authored by Vladislav Zolotarov's avatar Vladislav Zolotarov Committed by David S. Miller

bnx2x: Separated FW from the source.

>From now on FW will be downloaded from the binary file using request_firmware.

There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).

File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.

Each binary file has a header in the following format:


struct bnx2x_fw_file_section {
	__be32 len;
	__be32 offset;
}

struct bnx2x_fw_file_hdr {
	struct bnx2x_fw_file_section init_ops;
	struct bnx2x_fw_file_section init_ops_offsets;
	struct bnx2x_fw_file_section init_data;
	struct bnx2x_fw_file_section tsem_int_table_data;
	struct bnx2x_fw_file_section tsem_pram_data;
	struct bnx2x_fw_file_section usem_int_table_data;
	struct bnx2x_fw_file_section usem_pram_data;
	struct bnx2x_fw_file_section csem_int_table_data;
	struct bnx2x_fw_file_section csem_pram_data;
	struct bnx2x_fw_file_section xsem_int_table_data;
	struct bnx2x_fw_file_section xsem_pram_data;
	struct bnx2x_fw_file_section fw_version;
}

Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.

Data types of arrays:

init_data            __be32
init_ops_offsets     __be16
XXsem_pram_data         u8
XXsem_int_table_data    u8
init_ops             struct raw_op {
                          u8   op;
			__be24 offset;
                        __be32 data;
		     }
fw_version              u8

>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index 
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

#define BLOCK_OPS_IDX(block, stage, end) \
       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

Security:

In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.
Signed-off-by: default avatarVladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ec9323f4
...@@ -2676,6 +2676,7 @@ config TEHUTI ...@@ -2676,6 +2676,7 @@ config TEHUTI
config BNX2X config BNX2X
tristate "Broadcom NetXtremeII 10Gb support" tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI depends on PCI
select FW_LOADER
select ZLIB_INFLATE select ZLIB_INFLATE
select LIBCRC32C select LIBCRC32C
help help
......
...@@ -965,6 +965,21 @@ struct bnx2x { ...@@ -965,6 +965,21 @@ struct bnx2x {
int gunzip_outlen; int gunzip_outlen;
#define FW_BUF_SIZE 0x8000 #define FW_BUF_SIZE 0x8000
struct raw_op *init_ops;
/* Init blocks offsets inside init_ops */
u16 *init_ops_offsets;
/* Data blob - has 32 bit granularity */
u32 *init_data;
/* Zipped PRAM blobs - raw data */
const u8 *tsem_int_table_data;
const u8 *tsem_pram_data;
const u8 *usem_int_table_data;
const u8 *usem_pram_data;
const u8 *xsem_int_table_data;
const u8 *xsem_pram_data;
const u8 *csem_int_table_data;
const u8 *csem_pram_data;
const struct firmware *firmware;
}; };
......
/* bnx2x_fw_file_hdr.h: FW binary file header structure.
*
* Copyright (c) 2007-2009 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
* Maintained by: Eilon Greenstein <eilong@broadcom.com>
* Written by: Vladislav Zolotarov <vladz@broadcom.com>
* Based on the original idea of John Wright <john.wright@hp.com>.
*/
#ifndef BNX2X_INIT_FILE_HDR_H
#define BNX2X_INIT_FILE_HDR_H
struct bnx2x_fw_file_section {
__be32 len;
__be32 offset;
};
struct bnx2x_fw_file_hdr {
struct bnx2x_fw_file_section init_ops;
struct bnx2x_fw_file_section init_ops_offsets;
struct bnx2x_fw_file_section init_data;
struct bnx2x_fw_file_section tsem_int_table_data;
struct bnx2x_fw_file_section tsem_pram_data;
struct bnx2x_fw_file_section usem_int_table_data;
struct bnx2x_fw_file_section usem_pram_data;
struct bnx2x_fw_file_section csem_int_table_data;
struct bnx2x_fw_file_section csem_pram_data;
struct bnx2x_fw_file_section xsem_int_table_data;
struct bnx2x_fw_file_section xsem_pram_data;
struct bnx2x_fw_file_section fw_version;
};
#endif /* BNX2X_INIT_FILE_HDR_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
...@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \ ...@@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
adaptec/starfire_tx.bin adaptec/starfire_tx.bin
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \ fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \
bnx2/bnx2-rv2p-09-4.6.15.fw \ bnx2/bnx2-rv2p-09-4.6.15.fw \
bnx2/bnx2-mips-06-4.6.16.fw \ bnx2/bnx2-mips-06-4.6.16.fw \
......
...@@ -614,6 +614,26 @@ File: myricom/lanai.bin ...@@ -614,6 +614,26 @@ File: myricom/lanai.bin
Licence: Unknown Licence: Unknown
Found in hex form in kernel source.
--------------------------------------------------------------------------
Driver: bnx2x: Broadcom Everest
File: bnx2x-e1-4.8.53.0.fw.ihex
File: bnx2x-e1h-4.8.53.0.fw.ihex
License:
Copyright (c) 2007-2009 Broadcom Corporation
This file contains firmware data derived from proprietary unpublished
source code, Copyright (c) 2007-2009 Broadcom Corporation.
Permission is hereby granted for the distribution of this firmware data
in hexadecimal or equivalent format, provided this copyright notice is
accompanying it.
Found in hex form in kernel source. Found in hex form in kernel source.
-------------------------------------------------------------------------- --------------------------------------------------------------------------
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment