pwm: pwm-tiehrpwm: Update dt binding document to use generic node name

Now that the node name has been changed from ehrpwm to pwm the document
should show this proper usage. Change the unit address in the example
from 0 to the proper physical address value that should be used. Also
insure that the unit address matches to the reg property.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt

@@ -16,22 +16,22 @@ Optional properties:
 
 Example:
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
 	compatible = "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x100>;
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am4372 */
+ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
 	compatible = "ti,am4372-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x80>;
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
+ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
 	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
-	reg = <0x300000 0x2000>;
+	reg = <0x1f00000 0x2000>;
 };