Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: ohci: fix 2 timers to fire at jiffies + 1s
  USB: Allow initialization of broken keyspan serial adapters.
  USB: fix bug in sg initialization in usbtest
  USB: serial: fix regression in Visor/Palm OS module for kernels >= 2.6.24
  USB: cp2101: Add identifiers for the Telegesys ETRX2USB
  USB: serial: ti_usb_3410_5052: Correct TUSB3410 endpoint requirements.
  USB: another ehci_iaa_watchdog fix

drivers/usb/host/ehci-hub.c

@@ -135,8 +135,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 		hcd->state = HC_STATE_QUIESCING;
 	}
 	ehci->command = ehci_readl(ehci, &ehci->regs->command);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
 	ehci_work(ehci);
 
 	/* Unlike other USB host controller types, EHCI doesn't have
@@ -180,6 +178,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci_halt (ehci);
 	hcd->state = HC_STATE_SUSPENDED;
 
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+
 	/* allow remote wakeup */
 	mask = INTR_MASK;
 	if (!device_may_wakeup(&hcd->self.root_hub->dev))

drivers/usb/host/ohci-hcd.c

@@ -467,7 +467,7 @@ static void unlink_watchdog_func(unsigned long _ohci)
 out:
 	kfree(seen);
 	if (ohci->eds_scheduled)
-		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+		mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
 done:
 	spin_unlock_irqrestore(&ohci->lock, flags);
 }

drivers/usb/host/ohci-q.c

@@ -169,7 +169,7 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
 	if (quirk_zfmicro(ohci)
 			&& (ed->type == PIPE_INTERRUPT)
 			&& !(ohci->eds_scheduled++))
-		mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+		mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
 	wmb ();
 
 	/* we care about rm_list when setting CLE/BLE in case the HC was at

drivers/usb/misc/usbtest.c

@@ -378,6 +378,7 @@ alloc_sglist (int nents, int max, int vary)
 	sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
 	if (!sg)
 		return NULL;
+	sg_init_table(sg, nents);
 
 	for (i = 0; i < nents; i++) {
 		char		*buf;
@@ -390,7 +391,7 @@ alloc_sglist (int nents, int max, int vary)
 		}
 
 		/* kmalloc pages are always physically contiguous! */
-		sg_init_one(&sg[i], buf, size);
+		sg_set_buf(&sg[i], buf, size);
 
 		switch (pattern) {
 		case 0:

drivers/usb/serial/cp2101.c

@@ -75,6 +75,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */

drivers/usb/serial/keyspan.h

@@ -637,6 +637,7 @@ static struct usb_serial_driver keyspan_pre_device = {
 	.description		= "Keyspan - (without firmware)",
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -651,6 +652,7 @@ static struct usb_serial_driver keyspan_1port_device = {
 	.description		= "Keyspan 1 port adapter",
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 1,
@@ -678,6 +680,7 @@ static struct usb_serial_driver keyspan_2port_device = {
 	.description		= "Keyspan 2 port adapter",
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 2,
@@ -705,6 +708,7 @@ static struct usb_serial_driver keyspan_4port_device = {
 	.description		= "Keyspan 4 port adapter",
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_interrupt_out	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= NUM_DONT_CARE,
 	.num_ports		= 4,

drivers/usb/serial/ti_usb_3410_5052.c

@@ -265,8 +265,8 @@ static struct usb_serial_driver ti_1port_device = {
 	.description		= "TI USB 3410 1 port adapter",
 	.usb_driver		= &ti_usb_driver,
 	.id_table		= ti_id_table_3410,
-	.num_interrupt_in	= 1,
-	.num_bulk_in		= 1,
+	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_bulk_in		= NUM_DONT_CARE,
 	.num_bulk_out		= 1,
 	.num_ports		= 1,
 	.attach			= ti_startup,

drivers/usb/serial/visor.c

@@ -191,7 +191,7 @@ static struct usb_serial_driver handspring_device = {
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
-	.num_bulk_out =		2,
+	.num_bulk_out =		NUM_DONT_CARE,
 	.num_ports =		2,
 	.open =			visor_open,
 	.close =		visor_close,