Commit 95eb7882 authored by Vishal Kulkarni's avatar Vishal Kulkarni Committed by David S. Miller

cxgb4/cxgb4vf: Link management changes

1) Speed should be supported by Physical Port Capabilities.
2) report Forward Error Correction mode which are available.
3) Added few comments.
Signed-off-by: default avatarCasey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarVishal Kulkarni <vishal@chelsio.com>
Signed-off-by: default avatarArjun Vynipadath <arjun@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a9f8f40a
......@@ -446,8 +446,10 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
unsigned long *link_mode_mask)
{
#define SET_LMM(__lmm_name) \
__set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
link_mode_mask)
do { \
__set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
link_mode_mask); \
} while (0)
#define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \
do { \
......@@ -541,7 +543,7 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
case FW_PORT_TYPE_CR4_QSFP:
SET_LMM(FIBRE);
FW_CAPS_TO_LMM(SPEED_1G, 1000baseT_Full);
FW_CAPS_TO_LMM(SPEED_10G, 10000baseSR_Full);
FW_CAPS_TO_LMM(SPEED_10G, 10000baseKR_Full);
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full);
......@@ -552,6 +554,13 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
break;
}
if (fw_caps & FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M)) {
FW_CAPS_TO_LMM(FEC_RS, FEC_RS);
FW_CAPS_TO_LMM(FEC_BASER_RS, FEC_BASER);
} else {
SET_LMM(FEC_NONE);
}
FW_CAPS_TO_LMM(ANEG, Autoneg);
FW_CAPS_TO_LMM(802_3_PAUSE, Pause);
FW_CAPS_TO_LMM(802_3_ASM_DIR, Asym_Pause);
......@@ -679,18 +688,15 @@ static int set_link_ksettings(struct net_device *dev,
base->autoneg == AUTONEG_DISABLE) {
fw_caps = speed_to_fw_caps(base->speed);
/* Must only specify a single speed which must be supported
* as part of the Physical Port Capabilities.
*/
if ((fw_caps & (fw_caps - 1)) != 0 ||
!(lc->pcaps & fw_caps))
/* Speed must be supported by Physical Port Capabilities. */
if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->speed_caps = fw_caps;
lc->acaps = fw_caps;
} else {
fw_caps =
lmm_to_fw_caps(link_ksettings->link_modes.advertising);
lmm_to_fw_caps(link_ksettings->link_modes.advertising);
if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->speed_caps = 0;
......
......@@ -4105,6 +4105,9 @@ static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
* @mbox: the Firmware Mailbox to use
* @port: the Port ID
* @lc: the Port's Link Configuration
* @sleep_ok: if true we may sleep while awaiting command completion
* @timeout: time to wait for command to finish before timing out
* (negative implies @sleep_ok=false)
*
* Set up a port's MAC and PHY according to a desired link configuration.
* - If the PHY can auto-negotiate first decide what to advertise, then
......@@ -4124,6 +4127,7 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
int ret;
fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps);
/* Convert driver coding of Pause Frame Flow Control settings into the
* Firmware's API.
*/
......@@ -4143,8 +4147,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
fw_fec = cc_to_fwcap_fec(cc_fec);
/* Figure out what our Requested Port Capabilities are going to be.
* Note parallel structure in t4_handle_get_port_info() and
* init_link_config().
*/
if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
if (lc->autoneg == AUTONEG_ENABLE)
return -EINVAL;
rcap = lc->acaps | fw_fc | fw_fec;
lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
lc->fec = cc_fec;
......@@ -4156,7 +4165,11 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
}
/* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
/* Some Requested Port Capabilities are trivially wrong if they exceed
* the Physical Port Capabilities. We can check that here and provide
* moderately useful feedback in the system log.
*
* Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
* we need to exclude this from this check in order to maintain
* compatibility ...
*/
......@@ -4185,6 +4198,13 @@ int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL,
sleep_ok, timeout);
/* Unfortunately, even if the Requested Port Capabilities "fit" within
* the Physical Port Capabilities, some combinations of features may
* still not be leagal. For example, 40Gb/s and Reed-Solomon Forward
* Error Correction. So if the Firmware rejects the L1 Configure
* request, flag that here.
*/
if (ret) {
dev_err(adapter->pdev_dev,
"Requested Port Capabilities %#x rejected, error %d\n",
......@@ -8461,6 +8481,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
fc = fwcap_to_cc_pause(linkattr);
speed = fwcap_to_speed(linkattr);
/* Reset state for communicating new Transceiver Module status and
* whether the OS-dependent layer wants us to redo the current
* "sticky" L1 Configure Link Parameters.
*/
lc->new_module = false;
lc->redo_l1cfg = false;
......@@ -8497,9 +8521,15 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
*/
pi->port_type = port_type;
/* Record new Module Type information.
*/
pi->mod_type = mod_type;
/* Let the OS-dependent layer know if we have a new
* Transceiver Module inserted.
*/
lc->new_module = t4_is_inserted_mod_type(mod_type);
t4_os_portmod_changed(adapter, pi->port_id);
}
......@@ -8507,8 +8537,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
pi->tx_chan, t4_link_down_rc_str(linkdnrc));
dev_warn_ratelimited(adapter->pdev_dev,
"Port %d link down, reason: %s\n",
pi->tx_chan,
t4_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
......@@ -8518,6 +8550,11 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
lc->lpacaps = lpacaps;
lc->acaps = acaps & ADVERT_MASK;
/* If we're not physically capable of Auto-Negotiation, note
* this as Auto-Negotiation disabled. Otherwise, we track
* what Auto-Negotiation settings we have. Note parallel
* structure in t4_link_l1cfg_core() and init_link_config().
*/
if (!(lc->acaps & FW_PORT_CAP32_ANEG)) {
lc->autoneg = AUTONEG_DISABLE;
} else if (lc->acaps & FW_PORT_CAP32_ANEG) {
......@@ -8535,6 +8572,10 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
t4_os_link_changed(adapter, pi->port_id, link_ok);
}
/* If we have a new Transceiver Module and the OS-dependent code has
* told us that it wants us to redo whatever "sticky" L1 Configuration
* Link Parameters are set, do that now.
*/
if (lc->new_module && lc->redo_l1cfg) {
struct link_config old_lc;
int ret;
......
......@@ -2005,8 +2005,10 @@ static void t4vf_handle_get_port_info(struct port_info *pi,
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
pi->port_id, t4vf_link_down_rc_str(linkdnrc));
dev_warn_ratelimited(adapter->pdev_dev,
"Port %d link down, reason: %s\n",
pi->port_id,
t4vf_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment