Commit 9685c43e authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds

m68knommu: platform setup for 5206 ColdFire parts

Switch to platform style configuration for 5206 ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent ae1b5f0d
......@@ -13,12 +13,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcftimer.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
#include <asm/mcfuart.h>
/***************************************************************************/
......@@ -26,15 +25,51 @@ void coldfire_reset(void);
/***************************************************************************/
/*
* DMA channel base address table.
*/
unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
MCF_MBAR + MCFDMA_BASE0,
MCF_MBAR + MCFDMA_BASE1,
static struct mcf_platform_uart m5206_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5206_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5206_uart_platform,
};
unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
static struct platform_device *m5206_devices[] __initdata = {
&m5206_uart,
};
/***************************************************************************/
static void __init m5206_uart_init_line(int line, int irq)
{
if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
} else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
}
}
static void __init m5206_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5206_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5206_uart_init_line(line, m5206_uart_platform[line].irq);
}
/***************************************************************************/
......@@ -88,10 +123,21 @@ int mcf_timerirqpending(int timer)
/***************************************************************************/
void config_BSP(char *commandp, int size)
void __init config_BSP(char *commandp, int size)
{
mcf_setimr(MCFSIM_IMR_MASKALL);
mach_reset = coldfire_reset;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m5206_uarts_init();
platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment