ASoC: rt5670: change dapm routes of PLL connection

PLL should be powered up once filter power is on. So, "PLL1"
should be connected to filters instead of DACs.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt5670.c

@@ -1877,6 +1877,10 @@ static const struct snd_soc_dapm_route rt5670_dapm_routes[] = {
 	{ "DAC1 MIXR", "DAC1 Switch", "DAC1 R Mux" },
 	{ "DAC1 MIXR", NULL, "DAC Stereo1 Filter" },
 
+	{ "DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll },
+	{ "DAC Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll },
+	{ "DAC Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll },
+
 	{ "DAC MIX", NULL, "DAC1 MIXL" },
 	{ "DAC MIX", NULL, "DAC1 MIXR" },
 
@@ -1926,14 +1930,10 @@ static const struct snd_soc_dapm_route rt5670_dapm_routes[] = {
 
 	{ "DAC L1", NULL, "DAC L1 Power" },
 	{ "DAC L1", NULL, "Stereo DAC MIXL" },
-	{ "DAC L1", NULL, "PLL1", is_sys_clk_from_pll },
 	{ "DAC R1", NULL, "DAC R1 Power" },
 	{ "DAC R1", NULL, "Stereo DAC MIXR" },
-	{ "DAC R1", NULL, "PLL1", is_sys_clk_from_pll },
 	{ "DAC L2", NULL, "Mono DAC MIXL" },
-	{ "DAC L2", NULL, "PLL1", is_sys_clk_from_pll },
 	{ "DAC R2", NULL, "Mono DAC MIXR" },
-	{ "DAC R2", NULL, "PLL1", is_sys_clk_from_pll },
 
 	{ "OUT MIXL", "BST1 Switch", "BST1" },
 	{ "OUT MIXL", "INL Switch", "INL VOL" },