arm64: dts: rockchip: add reg property to brcmf sub-nodes

An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -668,9 +668,12 @@ &sdio0 {
 	vqmmc-supply = &vcc1v8_s3;	/* IO line */
 	vmmc-supply = &vcc_sdio;	/* card's power */
 
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi

@@ -654,9 +654,12 @@ &sdio0 {
 	sd-uhs-sdr104;
 	vqmmc-supply = <&vcc1v8_s3>;
 	vmmc-supply = <&vccio_sd>;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts

@@ -648,9 +648,12 @@ &sdio0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	brcmf: wifi@1 {
+		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;