MIPS: Alchemy: Unify Devboard support.

This patch merges support for all DB1xxx and PB1xxx
boards into a single image, along with a new single defconfig
for them.

Run-tested on DB1300 and DB1500.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6577/
Patchwork: https://patchwork.linux-mips.org/patch/6659/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/alchemy/Kconfig

@@ -16,7 +16,7 @@ config ALCHEMY_GPIO_INDIRECT
 choice
 	prompt "Machine type"
 	depends on MIPS_ALCHEMY
-	default MIPS_DB1000
+	default MIPS_DB1XXX
 
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
@@ -25,20 +25,17 @@ config MIPS_MTX1
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_DB1000
-	bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards"
-	select ALCHEMY_GPIOINT_AU1000
-	select HW_HAS_PCI
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_DB1235
-	bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards"
+config MIPS_DB1XXX
+	bool "Alchemy DB1XXX / PB1XXX boards"
 	select ARCH_REQUIRE_GPIOLIB
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
+	help
+	  Select this option if you have one of the following Alchemy
+	  development boards:  DB1000 DB1500 DB1100 DB1550 DB1200 DB1300
+			       PB1500 PB1100 PB1550 PB1200
+	  Board type is autodetected during boot.
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"

arch/mips/alchemy/Platform

@@ -5,18 +5,12 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/
 
 
 #
-# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 eval boards
+# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100
+#             Db1550/Pb1550/Db1200/Pb1200/Db1300
 #
-platform-$(CONFIG_MIPS_DB1000)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1200/Pb1200/Db1550/Pb1550/Db1300 eval boards
-#
-platform-$(CONFIG_MIPS_DB1235)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1235)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1235)	+= 0xffffffff80100000
+platform-$(CONFIG_MIPS_DB1XXX)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1XXX)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1XXX)	+= 0xffffffff80100000
 
 #
 # 4G-Systems MTX-1 "MeshCube" wireless router

arch/mips/alchemy/devboards/Makefile

@@ -2,7 +2,5 @@
 # Alchemy Develboards
 #
 
-obj-y += bcsr.o platform.o
+obj-y += bcsr.o platform.o db1000.o db1200.o db1300.o db1550.o db1xxx.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_DB1000)	+= db1000.o
-obj-$(CONFIG_MIPS_DB1235)	+= db1235.o db1200.o db1300.o db1550.o

arch/mips/alchemy/devboards/db1000.c

@@ -41,42 +41,27 @@
 
 #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
 
-struct pci_dev;
+const char *get_system_type(void);
 
-static const char *board_type_str(void)
+int __init db1000_board_setup(void)
 {
+	/* initialize board register space */
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
 	case BCSR_WHOAMI_DB1000:
-		return "DB1000";
 	case BCSR_WHOAMI_DB1500:
-		return "DB1500";
 	case BCSR_WHOAMI_DB1100:
-		return "DB1100";
 	case BCSR_WHOAMI_PB1500:
 	case BCSR_WHOAMI_PB1500R2:
-		return "PB1500";
 	case BCSR_WHOAMI_PB1100:
-		return "PB1100";
-	default:
-		return "(unknown)";
+		pr_info("AMD Alchemy %s Board\n", get_system_type());
+		return 0;
 	}
+	return -ENODEV;
 }
 
-const char *get_system_type(void)
-{
-	return board_type_str();
-}
-
-void __init board_setup(void)
-{
-	/* initialize board register space */
-	bcsr_init(DB1000_BCSR_PHYS_ADDR,
-		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
-
-	printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str());
-}
-
-
 static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
 	if ((slot < 12) || (slot > 13) || pin == 0)
@@ -114,17 +99,10 @@ static struct platform_device db1500_pci_host_dev = {
 	.resource	= alchemy_pci_host_res,
 };
 
-static int __init db1500_pci_init(void)
+int __init db1500_pci_setup(void)
 {
-	int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
-	if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) ||
-	    (id == BCSR_WHOAMI_PB1500R2))
-		return platform_device_register(&db1500_pci_host_dev);
-	return 0;
+	return platform_device_register(&db1500_pci_host_dev);
 }
-/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
-arch_initcall(db1500_pci_init);
-
 
 static struct resource au1100_lcd_resources[] = {
 	[0] = {
@@ -513,7 +491,7 @@ static struct platform_device *db1100_devs[] = {
 	&db1000_irda_dev,
 };
 
-static int __init db1000_dev_init(void)
+int __init db1000_dev_setup(void)
 {
 	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
@@ -623,4 +601,3 @@ static int __init db1000_dev_init(void)
 	db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED);
 	return 0;
 }
-device_initcall(db1000_dev_init);

arch/mips/alchemy/devboards/db1200.c

@@ -89,6 +89,15 @@ int __init db1200_board_setup(void)
 		return -ENODEV;
 
 	whoami = bcsr_read(BCSR_WHOAMI);
+	switch (BCSR_WHOAMI_BOARD(whoami)) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+	case BCSR_WHOAMI_DB1200:
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
 		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);

arch/mips/alchemy/devboards/db1300.c

@@ -759,11 +759,15 @@ int __init db1300_board_setup(void)
 {
 	unsigned short whoami;
 
-	db1300_gpio_config();
 	bcsr_init(DB1300_BCSR_PHYS_ADDR,
 		  DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
 
 	whoami = bcsr_read(BCSR_WHOAMI);
+	if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300)
+		return -ENODEV;
+
+	db1300_gpio_config();
+
 	printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
 		"BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
 		BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),

arch/mips/alchemy/devboards/db1550.c

@@ -62,10 +62,16 @@ int __init db1550_board_setup(void)
 		  DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS);
 
 	whoami = bcsr_read(BCSR_WHOAMI); /* PB1550 hexled offset differs */
-	if ((BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_SDR) ||
-	    (BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_DDR))
+	switch (BCSR_WHOAMI_BOARD(whoami)) {
+	case BCSR_WHOAMI_PB1550_SDR:
+	case BCSR_WHOAMI_PB1550_DDR:
 		bcsr_init(PB1550_BCSR_PHYS_ADDR,
 			  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+	case BCSR_WHOAMI_DB1550:
+		break;
+	default:
+		return -ENODEV;
+	}
 
 	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d	"	\
 		"Daughtercard ID %d\n", get_system_type(),

arch/mips/alchemy/devboards/db1235.c → arch/mips/alchemy/devboards/db1xxx.c

 /*
- * DB1200/PB1200 / DB1550 / DB1300 board support.
- *
- * These 4 boards can reliably be supported in a single kernel image.
+ * Alchemy DB/PB1xxx board support.
  */
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
+int __init db1000_board_setup(void);
+int __init db1000_dev_setup(void);
+int __init db1500_pci_setup(void);
 int __init db1200_board_setup(void);
 int __init db1200_dev_setup(void);
 int __init db1300_board_setup(void);
@@ -18,6 +19,17 @@ int __init db1550_pci_setup(int);
 static const char *board_type_str(void)
 {
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+		return "DB1000";
+	case BCSR_WHOAMI_DB1500:
+		return "DB1500";
+	case BCSR_WHOAMI_DB1100:
+		return "DB1100";
+	case BCSR_WHOAMI_PB1500:
+	case BCSR_WHOAMI_PB1500R2:
+		return "PB1500";
+	case BCSR_WHOAMI_PB1100:
+		return "PB1100";
 	case BCSR_WHOAMI_PB1200_DDR1:
 	case BCSR_WHOAMI_PB1200_DDR2:
 		return "PB1200";
@@ -45,6 +57,11 @@ void __init board_setup(void)
 	int ret;
 
 	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = db1000_board_setup();
+		break;
 	case ALCHEMY_CPU_AU1550:
 		ret = db1550_board_setup();
 		break;
@@ -62,7 +79,7 @@ void __init board_setup(void)
 		panic("cannot initialize board support");
 }
 
-int __init db1235_arch_init(void)
+static int __init db1xxx_arch_init(void)
 {
 	int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	if (id == BCSR_WHOAMI_DB1550)
@@ -70,14 +87,24 @@ int __init db1235_arch_init(void)
 	else if ((id == BCSR_WHOAMI_PB1550_SDR) ||
 		 (id == BCSR_WHOAMI_PB1550_DDR))
 		return db1550_pci_setup(1);
+	else if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) ||
+		 (id == BCSR_WHOAMI_PB1500R2))
+		return db1500_pci_setup();
 
 	return 0;
 }
-arch_initcall(db1235_arch_init);
+arch_initcall(db1xxx_arch_init);
 
-int __init db1235_dev_init(void)
+static int __init db1xxx_dev_init(void)
 {
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+	case BCSR_WHOAMI_DB1500:
+	case BCSR_WHOAMI_DB1100:
+	case BCSR_WHOAMI_PB1500:
+	case BCSR_WHOAMI_PB1500R2:
+	case BCSR_WHOAMI_PB1100:
+		return db1000_dev_setup();
 	case BCSR_WHOAMI_PB1200_DDR1:
 	case BCSR_WHOAMI_PB1200_DDR2:
 	case BCSR_WHOAMI_DB1200:
@@ -91,4 +118,4 @@ int __init db1235_dev_init(void)
 	}
 	return 0;
 }
-device_initcall(db1235_dev_init);
+device_initcall(db1xxx_dev_init);

arch/mips/configs/db1000_defconfig

-CONFIG_MIPS=y
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_DB1000=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION="-db1x00"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_KERNEL_LZMA=y
-CONFIG_DEFAULT_HOSTNAME="db1x00"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SYSCTL=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_EMBEDDED=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLAB=y
-CONFIG_SLABINFO=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_BINFMT_ELF=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_LRO=y
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_STP=y
-CONFIG_GARP=y
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_LLC=y
-CONFIG_LLC2=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI_MOD=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_PROC_FS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_ATA=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_SFF=y
-CONFIG_ATA_BMDMA=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_FIREWIRE=y
-CONFIG_FIREWIRE_OHCI=y
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_NET=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MIPS_AU1X00_ENET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOE=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_TTY_PRINTK=y
-CONFIG_DEVPORT=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_AU1100=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_AU1XAUDIO=y
-CONFIG_SND_SOC_AU1XAC97C=y
-CONFIG_SND_SOC_DB1000=y
-CONFIG_SND_SOC_AC97_CODEC=y
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_GENERIC_ACL=y
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_CMODE_PRIORITY=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_PNFS_FILE_LAYOUT=y
-CONFIG_PNFS_BLOCK=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-CONFIG_NFS_USE_NEW_IDMAPPER=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BACKCHANNEL=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="noirqdebug rootwait root=/dev/sda1 rootfstype=ext4 console=ttyS0,115200 video=au1100fb:panel:CRT_800x600_16"
-CONFIG_DEBUG_ZBOOT=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITYFS=y
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y

drivers/spi/spi-au1550.c

@@ -999,6 +999,15 @@ static int __init au1550_spi_init(void)
 	 * create memory device with 8 bits dev_devwidth
 	 * needed for proper byte ordering to spi fifo
 	 */
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+	case ALCHEMY_CPU_AU1200:
+	case ALCHEMY_CPU_AU1300:
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	if (usedma) {
 		ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
 		if (!ddma_memid)