Commit 974a9af5 authored by Shawn Guo's avatar Shawn Guo

ARM: mxs: remove system.c

There is no user of function mxs_reset_block() now.  Let's move
mxs_restart() into mach-mxs.c as a static function and remove system.c
completely.
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 8f7cf881
# Common support # Common support
obj-y := ocotp.o system.o mm.o obj-y := ocotp.o mm.o
obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += pm.o
......
...@@ -12,8 +12,6 @@ ...@@ -12,8 +12,6 @@
#define __MACH_MXS_COMMON_H__ #define __MACH_MXS_COMMON_H__
extern const u32 *mxs_get_ocotp(void); extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *);
extern void mxs_restart(char, const char *);
extern int mxs_saif_clkmux_select(unsigned int clkmux); extern int mxs_saif_clkmux_select(unsigned int clkmux);
extern int mx23_clocks_init(void); extern int mx23_clocks_init(void);
......
...@@ -22,11 +22,13 @@ ...@@ -22,11 +22,13 @@
#include <linux/irqchip/mxs.h> #include <linux/irqchip/mxs.h>
#include <linux/micrel_phy.h> #include <linux/micrel_phy.h>
#include <linux/mxsfb.h> #include <linux/mxsfb.h>
#include <linux/of_address.h>
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/phy.h> #include <linux/phy.h>
#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/consumer.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/time.h> #include <asm/mach/time.h>
#include <asm/system_misc.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/digctl.h> #include <mach/digctl.h>
#include <mach/mxs.h> #include <mach/mxs.h>
...@@ -459,6 +461,41 @@ static void __init mxs_machine_init(void) ...@@ -459,6 +461,41 @@ static void __init mxs_machine_init(void)
imx28_evk_post_init(); imx28_evk_post_init();
} }
#define MX23_CLKCTRL_RESET_OFFSET 0x120
#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
/*
* Reset the system. It is called by machine_restart().
*/
static void mxs_restart(char mode, const char *cmd)
{
struct device_node *np;
void __iomem *reset_addr;
np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
reset_addr = of_iomap(np, 0);
if (!reset_addr)
goto soft;
if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
reset_addr += MX23_CLKCTRL_RESET_OFFSET;
else
reset_addr += MX28_CLKCTRL_RESET_OFFSET;
/* reset the chip */
__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
pr_err("Failed to assert the chip reset\n");
/* Delay to allow the serial port to show the message */
mdelay(50);
soft:
/* We'll take a jump through zero as a poor second */
soft_restart(0);
}
static const char *imx23_dt_compat[] __initdata = { static const char *imx23_dt_compat[] __initdata = {
"fsl,imx23", "fsl,imx23",
NULL, NULL,
......
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/proc-fns.h>
#include <asm/system_misc.h>
#include <mach/mxs.h>
#include <mach/common.h>
#define MX23_CLKCTRL_RESET_OFFSET 0x120
#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
#define MXS_MODULE_CLKGATE (1 << 30)
#define MXS_MODULE_SFTRST (1 << 31)
/*
* Reset the system. It is called by machine_restart().
*/
void mxs_restart(char mode, const char *cmd)
{
struct device_node *np;
void __iomem *reset_addr;
np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
reset_addr = of_iomap(np, 0);
if (!reset_addr)
goto soft;
if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
reset_addr += MX23_CLKCTRL_RESET_OFFSET;
else
reset_addr += MX28_CLKCTRL_RESET_OFFSET;
/* reset the chip */
__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
pr_err("Failed to assert the chip reset\n");
/* Delay to allow the serial port to show the message */
mdelay(50);
soft:
/* We'll take a jump through zero as a poor second */
soft_restart(0);
}
/*
* Clear the bit and poll it cleared. This is usually called with
* a reset address and mask being either SFTRST(bit 31) or CLKGATE
* (bit 30).
*/
static int clear_poll_bit(void __iomem *addr, u32 mask)
{
int timeout = 0x400;
/* clear the bit */
__mxs_clrl(mask, addr);
/*
* SFTRST needs 3 GPMI clocks to settle, the reference manual
* recommends to wait 1us.
*/
udelay(1);
/* poll the bit becoming clear */
while ((__raw_readl(addr) & mask) && --timeout)
/* nothing */;
return !timeout;
}
int mxs_reset_block(void __iomem *reset_addr)
{
int ret;
int timeout = 0x400;
/* clear and poll SFTRST */
ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear CLKGATE */
__mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
/* set SFTRST to reset the block */
__mxs_setl(MXS_MODULE_SFTRST, reset_addr);
udelay(1);
/* poll CLKGATE becoming set */
while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
/* nothing */;
if (unlikely(!timeout))
goto error;
/* clear and poll SFTRST */
ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear and poll CLKGATE */
ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
if (unlikely(ret))
goto error;
return 0;
error:
pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
return -ETIMEDOUT;
}
EXPORT_SYMBOL(mxs_reset_block);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment