Merge tag 'sunxi-core-for-4.18' of...

Merge tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Allwinner core changes for 4.18

The A83t, unlike the other Allwinner SoCs, cannot use PSCI because of a
silicon bug. As such, we needed to have some smp_ops in order to bringup
the various cores (and clusters) found on this SoC.

* tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sun8i: smp: Add support for A83T
  ARM: sun9i: smp: Add is_a83t field
  ARM: sun9i: smp: Rename clusters's power-off
  ARM: shmobile: Convert file to use cntvoff
  ARM: sunxi: Add initialization of CNTVOFF
  ARM: smp: Add initialization of CNTVOFF
  ARM: sunxi: smp: Move assembly code into a file
  ARM: Allow this header to be included by assembly files
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/common/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+obj-$(CONFIG_SMP)		+= secure_cntvoff.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg

arch/arm/common/secure_cntvoff.S

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * Initialization of CNTVOFF register from secure mode
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(secure_cntvoff_init)
+	.arch	armv7-a
+	/*
+	 * CNTVOFF has to be initialized either from non-secure Hypervisor
+	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
+	 * then it should be handled by the secure code. The CPU must implement
+	 * the virtualization extensions.
+	 */
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
+	isb
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
+	isb
+	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
+	isb
+	cps	#SVC_MODE
+	ret	lr
+ENDPROC(secure_cntvoff_init)

arch/arm/include/asm/secure_cntvoff.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASMARM_ARCH_CNTVOFF_H
+#define __ASMARM_ARCH_CNTVOFF_H
+
+extern void secure_cntvoff_init(void);
+
+#endif

arch/arm/mach-shmobile/common.h

@@ -2,7 +2,6 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_init_cntvoff(void);
 extern void shmobile_init_delay(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;

arch/arm/mach-shmobile/headsmp-apmu.S

@@ -11,29 +11,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-ENTRY(shmobile_init_cntvoff)
-	/*
-	 * CNTVOFF has to be initialized either from non-secure Hypervisor
-	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
-	 * then it should be handled by the secure code
-	 */
-	cps	#MON_MODE
-	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
-	orr	r0, r1, #1
-	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
-	instr_sync
-	mov	r0, #0
-	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
-	instr_sync
-	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
-	instr_sync
-	cps	#SVC_MODE
-	ret	lr
-ENDPROC(shmobile_init_cntvoff)
-
 #ifdef CONFIG_SMP
 ENTRY(shmobile_boot_apmu)
-	bl	shmobile_init_cntvoff
+	bl	secure_cntvoff_init
 	b	secondary_startup
 ENDPROC(shmobile_boot_apmu)
 #endif

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -26,6 +26,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 #include "common.h"
 #include "rcar-gen2.h"
 
@@ -70,7 +71,7 @@ void __init rcar_gen2_timer_init(void)
 	void __iomem *base;
 	u32 freq;
 
-	shmobile_init_cntvoff();
+	secure_cntvoff_init();
 
 	if (of_machine_is_compatible("renesas,r8a7745") ||
 	    of_machine_is_compatible("renesas,r8a7792") ||

arch/arm/mach-sunxi/Kconfig

@@ -51,7 +51,7 @@ config MACH_SUN9I
 config ARCH_SUNXI_MC_SMP
 	bool
 	depends on SMP
-	default MACH_SUN9I
+	default MACH_SUN9I || MACH_SUN8I
 	select ARM_CCI400_PORT_CTRL
 	select ARM_CPU_SUSPEND
 

arch/arm/mach-sunxi/Makefile

 CFLAGS_mc_smp.o	+= -march=armv7-a
 
 obj-$(CONFIG_ARCH_SUNXI) += sunxi.o
-obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o
+obj-$(CONFIG_ARCH_SUNXI_MC_SMP) += mc_smp.o headsmp.o
 obj-$(CONFIG_SMP) += platsmp.o

arch/arm/mach-sunxi/headsmp.S

+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (c) 2018 Chen-Yu Tsai
+ * Copyright (c) 2018 Bootlin
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ * Mylène Josserand <mylene.josserand@bootlin.com>
+ *
+ * SMP support for sunxi based systems with Cortex A7/A15
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cputype.h>
+
+ENTRY(sunxi_mc_smp_cluster_cache_enable)
+	.arch	armv7-a
+	/*
+	 * Enable cluster-level coherency, in preparation for turning on the MMU.
+	 *
+	 * Also enable regional clock gating and L2 data latency settings for
+	 * Cortex-A15. These settings are from the vendor kernel.
+	 */
+	mrc	p15, 0, r1, c0, c0, 0
+	movw	r2, #(ARM_CPU_PART_MASK & 0xffff)
+	movt	r2, #(ARM_CPU_PART_MASK >> 16)
+	and	r1, r1, r2
+	movw	r2, #(ARM_CPU_PART_CORTEX_A15 & 0xffff)
+	movt	r2, #(ARM_CPU_PART_CORTEX_A15 >> 16)
+	cmp	r1, r2
+	bne	not_a15
+
+	/* The following is Cortex-A15 specific */
+
+	/* ACTLR2: Enable CPU regional clock gates */
+	mrc p15, 1, r1, c15, c0, 4
+	orr r1, r1, #(0x1 << 31)
+	mcr p15, 1, r1, c15, c0, 4
+
+	/* L2ACTLR */
+	mrc p15, 1, r1, c15, c0, 0
+	/* Enable L2, GIC, and Timer regional clock gates */
+	orr r1, r1, #(0x1 << 26)
+	/* Disable clean/evict from being pushed to external */
+	orr r1, r1, #(0x1<<3)
+	mcr p15, 1, r1, c15, c0, 0
+
+	/* L2CTRL: L2 data RAM latency */
+	mrc p15, 1, r1, c9, c0, 2
+	bic r1, r1, #(0x7 << 0)
+	orr r1, r1, #(0x3 << 0)
+	mcr p15, 1, r1, c9, c0, 2
+
+	/* End of Cortex-A15 specific setup */
+	not_a15:
+
+	/* Get value of sunxi_mc_smp_first_comer */
+	adr	r1, first
+	ldr	r0, [r1]
+	ldr	r0, [r1, r0]
+
+	/* Skip cci_enable_port_for_self if not first comer */
+	cmp	r0, #0
+	bxeq	lr
+	b	cci_enable_port_for_self
+
+	.align 2
+	first: .word sunxi_mc_smp_first_comer - .
+ENDPROC(sunxi_mc_smp_cluster_cache_enable)
+
+ENTRY(sunxi_mc_smp_secondary_startup)
+	bl	sunxi_mc_smp_cluster_cache_enable
+	bl	secure_cntvoff_init
+	b	secondary_startup
+ENDPROC(sunxi_mc_smp_secondary_startup)
+
+ENTRY(sunxi_mc_smp_resume)
+	bl	sunxi_mc_smp_cluster_cache_enable
+	b	cpu_resume
+ENDPROC(sunxi_mc_smp_resume)

arch/arm/mach-sunxi/sunxi.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
+#include <asm/secure_cntvoff.h>
 
 static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
@@ -62,7 +63,6 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
-	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h2-plus",
 	"allwinner,sun8i-h3",
 	"allwinner,sun8i-r40",
@@ -75,6 +75,24 @@ DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
 	.dt_compat	= sun8i_board_dt_compat,
 MACHINE_END
 
+static void __init sun8i_a83t_cntvoff_init(void)
+{
+#ifdef CONFIG_SMP
+	secure_cntvoff_init();
+#endif
+}
+
+static const char * const sun8i_a83t_cntvoff_board_dt_compat[] = {
+	"allwinner,sun8i-a83t",
+	NULL,
+};
+
+DT_MACHINE_START(SUN8I_A83T_CNTVOFF_DT, "Allwinner A83t board")
+	.init_early	= sun8i_a83t_cntvoff_init,
+	.init_time	= sun6i_timer_init,
+	.dt_compat	= sun8i_a83t_cntvoff_board_dt_compat,
+MACHINE_END
+
 static const char * const sun9i_board_dt_compat[] = {
 	"allwinner,sun9i-a80",
 	NULL,