NAND flash driver updates.

Update the core NAND code:
 - support multiple chips
 - support bad block tables
 - improved generic ECC support and 'spare area' usage.
 - 16-bit NAND
 - Large-block NAND devices
 - Renesas AG-AND devices
 - M-Systems DiskOnChip devices
 - Other new board support wrappers

Most of the work was done by Thomas Gleixner.
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

CREDITS

@@ -1090,6 +1090,10 @@ E: jbglaw@lug-owl.de
 D: SRM environment driver (for Alpha systems)
 P: 1024D/8399E1BB 250D 3BCF 7127 0D8C A444  A961 1DBD 5E75 8399 E1BB
 
+N: Thomas Gleixner
+E: tglx@linutronix.de
+D: NAND flash hardware support, JFFS2 on NAND flash
+
 N: Richard E. Gooch
 E: rgooch@atnf.csiro.au
 D: parent process death signal to children

drivers/mtd/mtdpart.c

@@ -5,7 +5,7 @@
  *
  * This code is GPL
  *
- * $Id: mtdpart.c,v 1.41 2003/06/18 14:53:02 dwmw2 Exp $
+ * $Id: mtdpart.c,v 1.46 2004/07/12 13:28:07 dwmw2 Exp $
  *
  * 	02-21-2002	Thomas Gleixner <gleixner@autronix.de>
  *			added support for read_oob, write_oob
@@ -239,12 +239,16 @@ static int part_readv_ecc (struct mtd_info *mtd,  struct kvec *vecs,
 static int part_erase (struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct mtd_part *part = PART(mtd);
+	int ret;
 	if (!(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
 	if (instr->addr >= mtd->size)
 		return -EINVAL;
 	instr->addr += part->offset;
-	return part->master->erase(part->master, instr);
+	ret = part->master->erase(part->master, instr);
+	if (instr->fail_addr != 0xffffffff)
+		instr->fail_addr -= part->offset;
+	return ret;
 }
 
 static int part_lock (struct mtd_info *mtd, loff_t ofs, size_t len)
@@ -281,6 +285,26 @@ static void part_resume(struct mtd_info *mtd)
 	part->master->resume(part->master);
 }
 
+static int part_block_isbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	return part->master->block_isbad(part->master, ofs);
+}
+
+static int part_block_markbad (struct mtd_info *mtd, loff_t ofs)
+{
+	struct mtd_part *part = PART(mtd);
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	if (ofs >= mtd->size)
+		return -EINVAL;
+	ofs += part->offset;
+	return part->master->block_markbad(part->master, ofs);
+}
+
 /* 
  * This function unregisters and destroy all slave MTD objects which are 
  * attached to the given master MTD object.
@@ -316,7 +340,7 @@ int del_mtd_partitions(struct mtd_info *master)
  */
 
 int add_mtd_partitions(struct mtd_info *master, 
-		       struct mtd_partition *parts,
+		       const struct mtd_partition *parts,
 		       int nbparts)
 {
 	struct mtd_part *slave;
@@ -391,6 +415,10 @@ int add_mtd_partitions(struct mtd_info *master,
 			slave->mtd.lock = part_lock;
 		if (master->unlock)
 			slave->mtd.unlock = part_unlock;
+		if (master->block_isbad)
+			slave->mtd.block_isbad = part_block_isbad;
+		if (master->block_markbad)
+			slave->mtd.block_markbad = part_block_markbad;
 		slave->mtd.erase = part_erase;
 		slave->master = master;
 		slave->offset = parts[i].offset;
@@ -461,6 +489,9 @@ int add_mtd_partitions(struct mtd_info *master,
 				parts[i].name);
 		}
 
+		/* copy oobinfo from master */ 
+		memcpy(&slave->mtd.oobinfo, &master->oobinfo, sizeof(slave->mtd.oobinfo));
+
 		if(parts[i].mtdp)
 		{	/* store the object pointer (caller may or may not register it */
 			*parts[i].mtdp = &slave->mtd;

drivers/mtd/nand/Kconfig

 # drivers/mtd/nand/Kconfig
-# $Id: Kconfig,v 1.4 2003/05/28 10:04:23 dwmw2 Exp $
+# $Id: Kconfig,v 1.14 2004/07/13 00:14:35 dbrown Exp $
 
 menu "NAND Flash Device Drivers"
 	depends on MTD!=n
@@ -9,7 +9,7 @@ config MTD_NAND
 	depends on MTD
 	help
 	  This enables support for accessing all type of NAND flash
-	  devices with an 8-bit data bus interface. For further information see
+	  devices. For further information see
 	  <http://www.linux-mtd.infradead.org/tech/nand.html>.
 
 config MTD_NAND_VERIFY_WRITE
@@ -42,10 +42,73 @@ config MTD_NAND_SPIA
 	help
 	  If you had to ask, you don't have one. Say 'N'.
 
+config MTD_NAND_TOTO
+	tristate "NAND Flash device on TOTO board"
+	depends on ARM && ARCH_OMAP && MTD_NAND
+	help
+	  Support for NAND flash on Texas Instruments Toto platform.
+
 config MTD_NAND_IDS
 	tristate
 	default y if MTD_NAND = y || MTD_DOC2000 = y || MTD_DOC2001 = y || MTD_DOC2001PLUS = y
 	default m if MTD_NAND = m || MTD_DOC2000 = m || MTD_DOC2001 = m || MTD_DOC2001PLUS = m
-	
-endmenu
 
+config MTD_NAND_TX4925NDFMC
+	tristate "SmartMedia Card on Toshiba RBTX4925 reference board"
+	depends on TOSHIBA_RBTX4925 && MTD_NAND && TOSHIBA_RBTX4925_MPLEX_NAND
+	help
+	  This enables the driver for the NAND flash device found on the
+	  Toshiba RBTX4925 reference board, which is a SmartMediaCard.
+
+config MTD_NAND_TX4938NDFMC
+	tristate "NAND Flash device on Toshiba RBTX4938 reference board"
+	depends on TOSHIBA_RBTX4938 && MTD_NAND && TOSHIBA_RBTX4938_MPLEX_NAND 
+	help
+	  This enables the driver for the NAND flash device found on the
+	  Toshiba RBTX4938 reference board.
+
+config MTD_NAND_AU1550
+	tristate "Au1550 NAND support"
+	depends on SOC_AU1550 && MTD_NAND
+	help
+	  This enables the driver for the NAND flash controller on the
+	  AMD/Alchemy 1550 SOC.
+
+config MTD_NAND_PPCHAMELEONEVB
+	tristate "NAND Flash device on PPChameleonEVB board"
+	depends on PPCHAMELEONEVB && MTD_NAND
+	help
+	  This enables the NAND flash driver on the PPChameleon EVB Board.	
+
+config MTD_NAND_DISKONCHIP
+	tristate "DiskOnChip 2000 and Millennium (NAND reimplementation) (EXPERIMENTAL)"
+	depends on MTD_NAND && EXPERIMENTAL
+	help
+	  This is a reimplementation of M-Systems DiskOnChip 2000 and
+	  Millennium as a standard NAND device driver, as opposed to the
+	  earlier self-contained MTD device drivers.
+	  This should enable, among other things, proper JFFS2 operation on
+	  these devices.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+	bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+	depends on MTD_NAND_DISKONCHIP
+	help
+	  On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+	  and 2000 TSOP/Alon), Linux reserves some space at the end of the
+	  device for the Bad Block Table (BBT).  If you have existing INFTL
+	  data on your device (created by non-Linux tools such as M-Systems'
+	  DOS drivers), your data might overlap the area Linux wants to use for
+	  the BBT.  If this is a concern for you, leave this option disabled and
+	  Linux will not write BBT data into this area.
+	  The downside of leaving this option disabled is that if bad blocks
+	  are detected by Linux, they will not be recorded in the BBT, which
+	  could cause future problems.
+	  Once you enable this option, new filesystems (INFTL or others, created
+	  in Linux or other operating systems) will not use the reserved area.
+	  The only reason not to enable this option is to prevent damage to
+	  preexisting filesystems.
+	  Even if you leave this disabled, you can enable BBT writes at module
+	  load time (assuming you build diskonchip as a module) with the module
+	  parameter "inftl_bbt_write=1".
+endmenu

drivers/mtd/nand/Makefile

 #
 # linux/drivers/nand/Makefile
 #
-# $Id: Makefile.common,v 1.2 2003/05/28 11:38:54 dwmw2 Exp $
+# $Id: Makefile.common,v 1.9 2004/07/12 16:07:31 dwmw2 Exp $
 
-obj-$(CONFIG_MTD_NAND)		+= nand.o nand_ecc.o
-obj-$(CONFIG_MTD_NAND_SPIA)	+= spia.o
-obj-$(CONFIG_MTD_NAND_AUTCPU12)	+= autcpu12.o
-obj-$(CONFIG_MTD_NAND_EDB7312)  += edb7312.o
-obj-$(CONFIG_MTD_NAND_IDS)	+= nand_ids.o
+obj-$(CONFIG_MTD_NAND)			+= nand.o nand_ecc.o
+obj-$(CONFIG_MTD_NAND_IDS)		+= nand_ids.o
+
+obj-$(CONFIG_MTD_NAND_SPIA)		+= spia.o
+obj-$(CONFIG_MTD_NAND_TOTO)		+= toto.o
+obj-$(CONFIG_MTD_NAND_AUTCPU12)		+= autcpu12.o
+obj-$(CONFIG_MTD_NAND_EDB7312)		+= edb7312.o
+obj-$(CONFIG_MTD_NAND_TX4925NDFMC)	+= tx4925ndfmc.o
+obj-$(CONFIG_MTD_NAND_TX4938NDFMC)	+= tx4938ndfmc.o
+obj-$(CONFIG_MTD_NAND_AU1550)		+= au1550nd.o
+obj-$(CONFIG_MTD_NAND_PPCHAMELEONEVB)	+= ppchameleonevb.o
+obj-$(CONFIG_MTD_NAND_DISKONCHIP)	+= diskonchip.o
+
+nand-objs = nand_base.o nand_bbt.o

drivers/mtd/nand/au1550nd.c

+/*
+ *  drivers/mtd/nand/au1550nd.c
+ *
+ *  Copyright (C) 2004 Embedded Edge, LLC
+ *
+ * $Id: au1550nd.c,v 1.5 2004/05/17 07:19:35 ppopov Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <asm/io.h>
+#include <asm/au1000.h>
+#ifdef CONFIG_MIPS_PB1550
+#include <asm/pb1550.h> 
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#include <asm/db1x00.h> 
+#endif
+
+
+/*
+ * MTD structure for NAND controller
+ */
+static struct mtd_info *au1550_mtd = NULL;
+static volatile u32 p_nand;
+static int nand_width = 1; /* default, only x8 supported for now */
+
+/* Internal buffers. Page buffer and oob buffer for one block*/
+static u_char data_buf[512 + 16];
+static u_char oob_buf[16 * 32];
+
+/*
+ * Define partitions for flash device
+ */
+const static struct mtd_partition partition_info[] = {
+#ifdef CONFIG_MIPS_PB1550
+#define NUM_PARTITIONS            2
+	{ 
+		.name = "Pb1550 NAND FS 0",
+	  	.offset = 0,
+	  	.size = 8*1024*1024 
+	},
+	{ 
+		.name = "Pb1550 NAND FS 1",
+		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    MTDPART_SIZ_FULL
+	}
+#endif
+#ifdef CONFIG_MIPS_DB1550
+#define NUM_PARTITIONS            2
+	{ 
+		.name = "Db1550 NAND FS 0",
+	  	.offset = 0,
+	  	.size = 8*1024*1024 
+	},
+	{ 
+		.name = "Db1550 NAND FS 1",
+		.offset =  MTDPART_OFS_APPEND,
+ 		.size =    MTDPART_SIZ_FULL
+	}
+#endif
+};
+
+static inline void write_cmd_reg(u8 cmd)
+{
+	if (nand_width)
+		*((volatile u8 *)(p_nand + MEM_STNAND_CMD)) = cmd;
+	else
+		*((volatile u16 *)(p_nand + MEM_STNAND_CMD)) = cmd;
+	au_sync();
+}
+
+static inline void write_addr_reg(u8 addr)
+{
+	if (nand_width)
+		*((volatile u8 *)(p_nand + MEM_STNAND_ADDR)) = addr;
+	else
+		*((volatile u16 *)(p_nand + MEM_STNAND_ADDR)) = addr;
+	au_sync();
+}
+
+static inline void write_data_reg(u8 data)
+{
+	if (nand_width)
+		*((volatile u8 *)(p_nand + MEM_STNAND_DATA)) = data;
+	else
+		*((volatile u16 *)(p_nand + MEM_STNAND_DATA)) = data;
+	au_sync();
+}
+
+static inline u32 read_data_reg(void)
+{
+	u32 data;
+	if (nand_width) {
+		data = *((volatile u8 *)(p_nand + MEM_STNAND_DATA));
+		au_sync();
+	}
+	else {
+		data = *((volatile u16 *)(p_nand + MEM_STNAND_DATA));
+		au_sync();
+	}
+	return data;
+}
+
+void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+}
+
+int au1550_device_ready(struct mtd_info *mtd)
+{
+	int ready;
+	ready = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
+	return ready;
+}
+
+static u_char au1550_nand_read_byte(struct mtd_info *mtd)
+{
+	u_char ret;
+	ret = read_data_reg();
+	return ret;
+}
+
+static void au1550_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	write_data_reg((u8)byte);
+}
+
+static void 
+au1550_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i=0; i<len; i++)
+		write_data_reg(buf[i]);
+}
+
+static void 
+au1550_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+
+	for (i=0; i<len; i++)
+		buf[i] = (u_char)read_data_reg();
+}
+
+static int 
+au1550_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i=0; i<len; i++)
+		if (buf[i] != (u_char)read_data_reg())
+			return -EFAULT;
+
+	return 0;
+}
+
+static void au1550_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	switch(chip) {
+	case -1:
+		/* deassert chip enable */
+		au_writel(au_readl(MEM_STNDCTL) & ~0x20 , MEM_STNDCTL);
+		break;
+	case 0:
+		/* assert (force assert) chip enable */
+		au_writel(au_readl(MEM_STNDCTL) | 0x20 , MEM_STNDCTL);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static void au1550_nand_command (struct mtd_info *mtd, unsigned command, 
+		int column, int page_addr)
+{
+	register struct nand_chip *this = mtd->priv;
+
+	/*
+	 * Write out the command to the device.
+	 */
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		write_cmd_reg(readcmd);
+	}
+	write_cmd_reg(command);
+
+	if (column != -1 || page_addr != -1) {
+
+		/* Serially input address */
+		if (column != -1)
+			write_addr_reg(column);
+		if (page_addr != -1) {
+			write_addr_reg((unsigned char) (page_addr & 0xff));
+			write_addr_reg(((page_addr >> 8) & 0xff));
+			/* One more address cycle for higher density devices */
+			if (mtd->size & 0x0c000000) 
+				write_addr_reg((unsigned char) ((page_addr >> 16) & 0x0f));
+		}
+	}
+	
+	switch (command) {
+			
+	case NAND_CMD_PAGEPROG:
+	case NAND_CMD_ERASE1:
+	case NAND_CMD_ERASE2:
+	case NAND_CMD_SEQIN:
+	case NAND_CMD_STATUS:
+		break;
+
+	case NAND_CMD_RESET:
+		if (this->dev_ready)	
+			break;
+		udelay(this->chip_delay);
+		write_cmd_reg(NAND_CMD_STATUS);
+		while ( !(read_data_reg() & 0x40));
+		return;
+
+	/* This applies to read commands */	
+	default:
+		udelay (this->chip_delay);
+	}
+	
+	/* wait until command is processed */
+	while (!this->dev_ready(mtd));
+}
+
+
+/*
+ * Main initialization routine
+ */
+int __init au1550_init (void)
+{
+	struct nand_chip *this;
+	u16 boot_swapboot = 0; /* default value */
+	u32 mem_time;
+
+	/* Allocate memory for MTD device structure and private data */
+	au1550_mtd = kmalloc (sizeof(struct mtd_info) + 
+			sizeof (struct nand_chip), GFP_KERNEL);
+	if (!au1550_mtd) {
+		printk ("Unable to allocate NAND MTD dev structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Get pointer to private data */
+	this = (struct nand_chip *) (&au1550_mtd[1]);
+
+	/* Initialize structures */
+	memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
+	memset((char *) this, 0, sizeof(struct nand_chip));
+
+	/* Link the private data with the MTD structure */
+	au1550_mtd->priv = this;
+
+	/* disable interrupts */
+	au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
+
+	/* disable NAND boot */
+	au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
+
+#ifdef CONFIG_MIPS_PB1550
+	/* set gpio206 high */
+	au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
+
+	boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | 
+		((bcsr->status >> 6)  & 0x1);
+	switch (boot_swapboot) {
+		case 0:
+		case 2:
+		case 8:
+		case 0xC:
+		case 0xD:
+			/* x16 NAND Flash */
+			nand_width = 0;
+			printk("Pb1550 NAND: 16-bit NAND not supported by MTD\n");
+			break;
+		case 1:
+		case 9:
+		case 3:
+		case 0xE:
+		case 0xF:
+			/* x8 NAND Flash */
+			nand_width = 1;
+			break;
+		default:
+			printk("Pb1550 NAND: bad boot:swap\n");
+			kfree(au1550_mtd);
+			return 1;
+	}
+
+	/* Configure RCE1 - should be done by YAMON */
+	au_writel(0x5 | (nand_width << 22), MEM_STCFG1);
+	au_writel(NAND_TIMING, MEM_STTIME1);
+	mem_time = au_readl(MEM_STTIME1);
+	au_sync();
+
+	/* setup and enable chip select */
+	/* we really need to decode offsets only up till 0x20 */
+	au_writel((1<<28) | (NAND_PHYS_ADDR>>4) | 
+			(((NAND_PHYS_ADDR + 0x1000)-1) & (0x3fff<<18)>>18), 
+			MEM_STADDR1);
+	au_sync();
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+	/* Configure RCE1 - should be done by YAMON */
+	au_writel(0x00400005, MEM_STCFG1);
+	au_writel(0x00007774, MEM_STTIME1);
+	au_writel(0x12000FFF, MEM_STADDR1);
+#endif
+
+	p_nand = (volatile struct nand_regs *)ioremap(NAND_PHYS_ADDR, 0x1000);
+
+	/* Set address of hardware control function */
+	this->hwcontrol = au1550_hwcontrol;
+	this->dev_ready = au1550_device_ready;
+	/* 30 us command delay time */
+	this->chip_delay = 30;		
+
+	this->cmdfunc = au1550_nand_command;
+	this->select_chip = au1550_nand_select_chip;
+	this->write_byte = au1550_nand_write_byte;
+	this->read_byte = au1550_nand_read_byte;
+	this->write_buf = au1550_nand_write_buf;
+	this->read_buf = au1550_nand_read_buf;
+	this->verify_buf = au1550_nand_verify_buf;
+	this->eccmode = NAND_ECC_SOFT;
+
+	/* Set internal data buffer */
+	this->data_buf = data_buf;
+	this->oob_buf = oob_buf;
+
+	/* Scan to find existence of the device */
+	if (nand_scan (au1550_mtd, 1)) {
+		kfree (au1550_mtd);
+		return -ENXIO;
+	}
+
+	/* Register the partitions */
+	add_mtd_partitions(au1550_mtd, partition_info, NUM_PARTITIONS);
+
+	return 0;
+}
+
+module_init(au1550_init);
+
+/*
+ * Clean up routine
+ */
+#ifdef MODULE
+static void __exit au1550_cleanup (void)
+{
+	struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
+
+	iounmap ((void *)p_nand);
+
+	/* Unregister partitions */
+	del_mtd_partitions(au1550_mtd);
+
+	/* Unregister the device */
+	del_mtd_device (au1550_mtd);
+
+	/* Free the MTD device structure */
+	kfree (au1550_mtd);
+}
+module_exit(au1550_cleanup);
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");

drivers/mtd/nand/autcpu12.c

@@ -6,7 +6,7 @@
  *  Derived from drivers/mtd/spia.c
  * 	 Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  * 
- * $Id: autcpu12.c,v 1.11 2003/06/04 17:04:09 gleixner Exp $
+ * $Id: autcpu12.c,v 1.19 2004/07/12 15:02:15 dwmw2 Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,7 +15,7 @@
  *  Overview:
  *   This is a device driver for the NAND flash device found on the
  *   autronix autcpu12 board, which is a SmartMediaCard. It supports 
- *   16MB, 32MB and 64MB cards.
+ *   16MiB, 32MiB and 64MiB cards.
  *
  *
  *	02-12-2002 TG	Cleanup of module params
@@ -71,42 +71,40 @@ __setup("autcpu12_pedr=",autcpu12_pedr);
 /*
  * Define partitions for flash devices
  */
-extern struct nand_oobinfo jffs2_oobinfo;
-
 static struct mtd_partition partition_info16k[] = {
-	{ .name = "AUTCPU12 flash partition 1",
-	  .offset  = 0,
-	  .size =    8 * SZ_1M },
-	{ .name = "AUTCPU12 flash partition 2",
-	  .offset =  8 * SZ_1M,
-	  .size =    8 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 8 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 8 * SZ_1M,
+	  .size		= 8 * SZ_1M },
 };
 
 static struct mtd_partition partition_info32k[] = {
-	{ .name = "AUTCPU12 flash partition 1",
-	  .offset  = 0,
-	  .size =    8 * SZ_1M },
-	{ .name = "AUTCPU12 flash partition 2",
-	  .offset =  8 * SZ_1M,
-	  .size =   24 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 8 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 8 * SZ_1M,
+	  .size		= 24 * SZ_1M },
 };
 
 static struct mtd_partition partition_info64k[] = {
-	{ .name = "AUTCPU12 flash partition 1",
-	  .offset  = 0,
-	  .size =   16 * SZ_1M },
-	{ .name = "AUTCPU12 flash partition 2",
-	  .offset = 16 * SZ_1M,
-	  .size =   48 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 16 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 16 * SZ_1M,
+	  .size		= 48 * SZ_1M },
 };
 
 static struct mtd_partition partition_info128k[] = {
-	{ .name = "AUTCPU12 flash partition 1",
-	  .offset  = 0,
-	  .size =   16 * SZ_1M },
-	{ .name = "AUTCPU12 flash partition 2",
-	  .offset = 16 * SZ_1M,
-	  .size =   112 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 1",
+	  .offset	= 0,
+	  .size		= 16 * SZ_1M },
+	{ .name		= "AUTCPU12 flash partition 2",
+	  .offset	= 16 * SZ_1M,
+	  .size		= 112 * SZ_1M },
 };
 
 #define NUM_PARTITIONS16K 2
@@ -116,7 +114,7 @@ static struct mtd_partition partition_info128k[] = {
 /* 
  *	hardware specific access to control-lines
 */
-void autcpu12_hwcontrol(int cmd)
+static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd)
 {
 
 	switch(cmd){
@@ -135,12 +133,13 @@ void autcpu12_hwcontrol(int cmd)
 /*
 *	read device ready pin
 */
-int autcpu12_device_ready(void)
+int autcpu12_device_ready(struct mtd_info *mtd)
 {
 
 	return ( (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0;
 
 }
+
 /*
  * Main initialization routine
  */
@@ -185,20 +184,18 @@ int __init autcpu12_init (void)
 	this->chip_delay = 20;		
 	this->eccmode = NAND_ECC_SOFT;
 
+	/* Enable the following for a flash based bad block table */
+	/*
+	this->options = NAND_USE_FLASH_BBT;
+	*/
+	this->options = NAND_USE_FLASH_BBT;
+	
 	/* Scan to find existance of the device */
-	if (nand_scan (autcpu12_mtd)) {
+	if (nand_scan (autcpu12_mtd, 1)) {
 		err = -ENXIO;
 		goto out_ior;
 	}
-
-	/* Allocate memory for internal data buffer */
-	this->data_buf = kmalloc (sizeof(u_char) * (autcpu12_mtd->oobblock + autcpu12_mtd->oobsize), GFP_KERNEL);
-	if (!this->data_buf) {
-		printk ("Unable to allocate NAND data buffer for AUTCPU12.\n");
-		err = -ENOMEM;
-		goto out_ior;
-	}
-
+	
 	/* Register the partitions */
 	switch(autcpu12_mtd->size){
 		case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break;
@@ -208,13 +205,11 @@ int __init autcpu12_init (void)
 		default: {
 			printk ("Unsupported SmartMedia device\n"); 
 			err = -ENXIO;
-			goto out_buf;
+			goto out_ior;
 		}
 	}
 	goto out;
 
-out_buf:
-	kfree (this->data_buf);    
 out_ior:
 	iounmap((void *)autcpu12_fio_base);
 out_mtd:
@@ -231,20 +226,12 @@ module_init(autcpu12_init);
 #ifdef MODULE
 static void __exit autcpu12_cleanup (void)
 {
-	struct nand_chip *this = (struct nand_chip *) &autcpu12_mtd[1];
-
-	/* Unregister partitions */
-	del_mtd_partitions(autcpu12_mtd);
-	
-	/* Unregister the device */
-	del_mtd_device (autcpu12_mtd);
-
-	/* Free internal data buffers */
-	kfree (this->data_buf);
+	/* Release resources, unregister device */
+	nand_release (autcpu12_mtd);
 
 	/* unmap physical adress */
 	iounmap((void *)autcpu12_fio_base);
-
+	
 	/* Free the MTD device structure */
 	kfree (autcpu12_mtd);
 }

drivers/mtd/nand/edb7312.c

@@ -6,7 +6,7 @@
  *  Derived from drivers/mtd/nand/autcpu12.c
  *       Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
  *
- * $Id: edb7312.c,v 1.5 2003/04/20 07:24:40 gleixner Exp $
+ * $Id: edb7312.c,v 1.8 2004/07/12 15:03:26 dwmw2 Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,6 +20,7 @@
 
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/init.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
@@ -83,7 +84,7 @@ static struct mtd_partition partition_info[] = {
 /* 
  *	hardware specific access to control-lines
  */
-static void ep7312_hwcontrol(int cmd) 
+static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd) 
 {
 	switch(cmd) {
 		
@@ -113,10 +114,13 @@ static void ep7312_hwcontrol(int cmd)
 /*
  *	read device ready pin
  */
-static int ep7312_device_ready(void)
+static int ep7312_device_ready(struct mtd_info *mtd)
 {
 	return 1;
 }
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
 
 /*
  * Main initialization routine
@@ -171,7 +175,7 @@ static int __init ep7312_init (void)
 	this->chip_delay = 15;
 	
 	/* Scan to find existence of the device */
-	if (nand_scan (ep7312_mtd)) {
+	if (nand_scan (ep7312_mtd, 1)) {
 		iounmap((void *)ep7312_fio_base);
 		kfree (ep7312_mtd);
 		return -ENXIO;
@@ -186,16 +190,16 @@ static int __init ep7312_init (void)
 		return -ENOMEM;
 	}
 	
-#ifdef CONFIG_MTD_CMDLINE_PARTS
-	mtd_parts_nb = parse_cmdline_partitions(ep7312_mtd, &mtd_parts, 
-						"edb7312-nand");
+#ifdef CONFIG_PARTITIONS
+	ep7312_mtd->name = "edb7312-nand";
+	mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes,
+					    &mtd_parts, 0);
 	if (mtd_parts_nb > 0)
-	  part_type = "command line";
+		part_type = "command line";
 	else
-	  mtd_parts_nb = 0;
+		mtd_parts_nb = 0;
 #endif
-	if (mtd_parts_nb == 0)
-	{
+	if (mtd_parts_nb == 0) {
 		mtd_parts = partition_info;
 		mtd_parts_nb = NUM_PARTITIONS;
 		part_type = "static";

drivers/mtd/nand/nand_ecc.c

 /*
- *  drivers/mtd/nand_ecc.c
+ * This file contains an ECC algorithm from Toshiba that detects and
+ * corrects 1 bit errors in a 256 byte block of data.
  *
- *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- *                     Toshiba America Electronics Components, Inc.
+ * drivers/mtd/nand/nand_ecc.c
  *
- * $Id: nand_ecc.c,v 1.9 2003/02/20 13:34:19 sjhill Exp $
+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
+ *                         Toshiba America Electronics Components, Inc.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public License
- * version 2.1 as published by the Free Software Foundation.
+ * $Id: nand_ecc.c,v 1.14 2004/06/16 15:34:37 gleixner Exp $
  *
- * This file contains an ECC algorithm from Toshiba that detects and
- * corrects 1 bit errors in a 256 byte block of data.
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ * 
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ * 
+ * As a special exception, if other files instantiate templates or use
+ * macros or inline functions from these files, or you compile these
+ * files and link them with other works to produce a work based on these
+ * files, these files do not by themselves cause the resulting work to be
+ * covered by the GNU General Public License. However the source code for
+ * these files must still be made available in accordance with section (3)
+ * of the GNU General Public License.
+ * 
+ * This exception does not invalidate any other reasons why a work based on
+ * this file might be covered by the GNU General Public License.
  */
 
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mtd/nand_ecc.h>
 
 /*
  * Pre-calculated 256-way 1 byte column parity
@@ -41,7 +63,12 @@ static const u_char nand_ecc_precalc_table[] = {
 };
 
 
-/*
+/**
+ * nand_trans_result - [GENERIC] create non-inverted ECC
+ * @reg2:	line parity reg 2
+ * @reg3:	line parity reg 3
+ * @ecc_code:	ecc 
+ *
  * Creates non-inverted ECC code from line parity
  */
 static void nand_trans_result(u_char reg2, u_char reg3,
@@ -81,10 +108,13 @@ static void nand_trans_result(u_char reg2, u_char reg3,
 	ecc_code[1] = tmp2;
 }
 
-/*
- * Calculate 3 byte ECC code for 256 byte block
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
+ * @mtd:	MTD block structure
+ * @dat:	raw data
+ * @ecc_code:	buffer for ECC
  */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
 {
 	u_char idx, reg1, reg2, reg3;
 	int j;
@@ -114,12 +144,19 @@ void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
 	ecc_code[0] = ~ecc_code[0];
 	ecc_code[1] = ~ecc_code[1];
 	ecc_code[2] = ((~reg1) << 2) | 0x03;
+	return 0;
 }
 
-/*
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd:	MTD block structure
+ * @dat:	raw data read from the chip
+ * @read_ecc:	ECC from the chip
+ * @calc_ecc:	the ECC calculated from raw data
+ *
  * Detect and correct a 1 bit error for 256 byte block
  */
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
 {
 	u_char a, b, c, d1, d2, d3, add, bit, i;
 	

drivers/mtd/nand/nand_ids.c

@@ -2,9 +2,8 @@
  *  drivers/mtd/nandids.c
  *
  *  Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
- *
- *
- * $Id: nand_ids.c,v 1.4 2003/05/21 15:15:08 dwmw2 Exp $
+  *
+ * $Id: nand_ids.c,v 1.10 2004/05/26 13:40:12 gleixner Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -13,26 +12,99 @@
  */
 #include <linux/module.h>
 #include <linux/mtd/nand.h>
-
 /*
 *	Chip ID list
+*	
+*	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
+*	options
+* 
+* 	Pagesize; 0, 256, 512
+*	0 	get this information from the extended chip ID
++	256	256 Byte page size
+*	512	512 Byte page size	
 */
 struct nand_flash_dev nand_flash_ids[] = {
-	{"NAND 1MiB 5V", 0x6e, 20, 0x1000, 1},
-	{"NAND 2MiB 5V", 0x64, 21, 0x1000, 1},
-	{"NAND 4MiB 5V", 0x6b, 22, 0x2000, 0},
-	{"NAND 1MiB 3,3V", 0xe8, 20, 0x1000, 1},
-	{"NAND 1MiB 3,3V", 0xec, 20, 0x1000, 1},
-	{"NAND 2MiB 3,3V", 0xea, 21, 0x1000, 1},
-	{"NAND 4MiB 3,3V", 0xd5, 22, 0x2000, 0},
-	{"NAND 4MiB 3,3V", 0xe3, 22, 0x2000, 0},
-	{"NAND 4MiB 3,3V", 0xe5, 22, 0x2000, 0},
-	{"NAND 8MiB 3,3V", 0xd6, 23, 0x2000, 0},
-	{"NAND 8MiB 3,3V", 0xe6, 23, 0x2000, 0},
-	{"NAND 16MiB 3,3V", 0x73, 24, 0x4000, 0},
-	{"NAND 32MiB 3,3V", 0x75, 25, 0x4000, 0},
-	{"NAND 64MiB 3,3V", 0x76, 26, 0x4000, 0},
-	{"NAND 128MiB 3,3V", 0x79, 27, 0x4000, 0},
+	{"NAND 1MiB 5V 8-bit", 		0x6e, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 5V 8-bit", 		0x64, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 5V 8-bit", 		0x6b, 512, 4, 0x2000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xe8, 256, 1, 0x1000, 0},
+	{"NAND 1MiB 3,3V 8-bit", 	0xec, 256, 1, 0x1000, 0},
+	{"NAND 2MiB 3,3V 8-bit", 	0xea, 256, 2, 0x1000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xd5, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe3, 512, 4, 0x2000, 0},
+	{"NAND 4MiB 3,3V 8-bit", 	0xe5, 512, 4, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xd6, 512, 8, 0x2000, 0},
+	
+	{"NAND 8MiB 1,8V 8-bit", 	0x39, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 3,3V 8-bit", 	0xe6, 512, 8, 0x2000, 0},
+	{"NAND 8MiB 1,8V 16-bit", 	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	{"NAND 8MiB 3,3V 16-bit", 	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+	
+	{"NAND 16MiB 1,8V 8-bit", 	0x33, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 3,3V 8-bit", 	0x73, 512, 16, 0x4000, 0},
+	{"NAND 16MiB 1,8V 16-bit", 	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 16MiB 3,3V 16-bit", 	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 32MiB 1,8V 8-bit", 	0x35, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 3,3V 8-bit", 	0x75, 512, 32, 0x4000, 0},
+	{"NAND 32MiB 1,8V 16-bit", 	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 32MiB 3,3V 16-bit", 	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 64MiB 1,8V 8-bit", 	0x36, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 3,3V 8-bit", 	0x76, 512, 64, 0x4000, 0},
+	{"NAND 64MiB 1,8V 16-bit", 	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 64MiB 3,3V 16-bit", 	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 128MiB 1,8V 8-bit", 	0x78, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 3,3V 8-bit", 	0x79, 512, 128, 0x4000, 0},
+	{"NAND 128MiB 1,8V 16-bit", 	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	{"NAND 128MiB 3,3V 16-bit", 	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+	
+	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
+
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
+	
+	/* These are the new chips with large page size. The pagesize
+	* and the erasesize is determined from the extended id bytes
+	*/
+	/* 1 Gigabit */
+	{"NAND 128MiB 1,8V 8-bit", 	0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 8-bit", 	0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 1,8V 16-bit", 	0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 128MiB 3,3V 16-bit", 	0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 2 Gigabit */
+	{"NAND 256MiB 1,8V 8-bit", 	0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 8-bit", 	0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 1,8V 16-bit", 	0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 256MiB 3,3V 16-bit", 	0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 4 Gigabit */
+	{"NAND 512MiB 1,8V 8-bit", 	0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 1,8V 16-bit", 	0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 512MiB 3,3V 16-bit", 	0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	
+	/* 8 Gigabit */
+	{"NAND 1GiB 1,8V 8-bit", 	0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 8-bit", 	0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 1,8V 16-bit", 	0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 1GiB 3,3V 16-bit", 	0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* 16 Gigabit */
+	{"NAND 2GiB 1,8V 8-bit", 	0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 8-bit", 	0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 1,8V 16-bit", 	0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+	{"NAND 2GiB 3,3V 16-bit", 	0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
+
+	/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! 
+	 * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
+	 * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
+	 * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
+	 * There are more speed improvements for reads and writes possible, but not implemented now 
+	 */
+	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
+
 	{NULL,}
 };
 
@@ -44,10 +116,11 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_SAMSUNG, "Samsung"},
 	{NAND_MFR_FUJITSU, "Fujitsu"},
 	{NAND_MFR_NATIONAL, "National"},
+	{NAND_MFR_RENESAS, "Renesas"},
+	{NAND_MFR_STMICRO, "ST Micro"},
 	{0x0, "Unknown"}
 };
 
-
 EXPORT_SYMBOL (nand_manuf_ids);
 EXPORT_SYMBOL (nand_flash_ids);
 

drivers/mtd/nand/spia.c

@@ -8,7 +8,7 @@
  *			to controllines	(due to change in nand.c)
  *			page_cache added
  *
- * $Id: spia.c,v 1.19 2003/04/20 07:24:40 gleixner Exp $
+ * $Id: spia.c,v 1.21 2003/07/11 15:12:29 dwmw2 Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,6 +20,8 @@
  *   a 64Mibit (8MiB x 8 bits) NAND flash device.
  */
 
+#include <linux/kernel.h>
+#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
@@ -35,14 +37,14 @@ static struct mtd_info *spia_mtd = NULL;
 /*
  * Values specific to the SPIA board (used with EP7212 processor)
  */
-#define SPIA_IO_ADDR	= 0xd0000000	/* Start of EP7212 IO address space */
-#define SPIA_FIO_ADDR	= 0xf0000000	/* Address where flash is mapped */
-#define SPIA_PEDR	= 0x0080	/*
+#define SPIA_IO_BASE	0xd0000000	/* Start of EP7212 IO address space */
+#define SPIA_FIO_BASE	0xf0000000	/* Address where flash is mapped */
+#define SPIA_PEDR	0x0080		/*
 					 * IO offset to Port E data register
 					 * where the CLE, ALE and NCE pins
 					 * are wired to.
 					 */
-#define SPIA_PEDDR	= 0x00c0	/*
+#define SPIA_PEDDR	0x00c0		/*
 					 * IO offset to Port E data direction
 					 * register so we can control the IO
 					 * lines.
@@ -62,11 +64,6 @@ MODULE_PARM(spia_fio_base, "i");
 MODULE_PARM(spia_pedr, "i");
 MODULE_PARM(spia_peddr, "i");
 
-__setup("spia_io_base=",spia_io_base);
-__setup("spia_fio_base=",spia_fio_base);
-__setup("spia_pedr=",spia_pedr);
-__setup("spia_peddr=",spia_peddr);
-
 /*
  * Define partitions for flash device
  */
@@ -88,7 +85,7 @@ const static struct mtd_partition partition_info[] = {
 /* 
  *	hardware specific access to control-lines
 */
-void spia_hwcontrol(int cmd){
+static void spia_hwcontrol(struct mtd_info *mtd, int cmd){
 
     switch(cmd){
 
@@ -143,7 +140,7 @@ int __init spia_init (void)
 	this->chip_delay = 15;		
 
 	/* Scan to find existence of the device */
-	if (nand_scan (spia_mtd)) {
+	if (nand_scan (spia_mtd, 1)) {
 		kfree (spia_mtd);
 		return -ENXIO;
 	}

include/linux/mtd/nand_ecc.h

@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  *
- * $Id: nand_ecc.h,v 1.2 2003/02/20 13:34:20 sjhill Exp $
+ * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,17 +12,19 @@
  * This file is the header for the ECC algorithm.
  */
 
-/*
- * Creates non-inverted ECC code from line parity
- */
-void nand_trans_result(u_char reg2, u_char reg3, u_char *ecc_code);
+#ifndef __MTD_NAND_ECC_H__
+#define __MTD_NAND_ECC_H__
+
+struct mtd_info;
 
 /*
  * Calculate 3 byte ECC code for 256 byte block
  */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
 
 /*
  * Detect and correct a 1 bit error for 256 byte block
  */
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+
+#endif /* __MTD_NAND_ECC_H__ */