staging: comedi: drivers/*.c: fix common misspellings

Fix these common misspellings:
  s/dependancy/dependency
  s/occured/occurred
  s/informations/information
  s/intialize/initialize
  s/serveral/several
  s/interrups/interrupts
  s/acknowledgement/acknowledgment
  s/suppport/support
  s/writting/writing
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/8255_pci.c

@@ -178,7 +178,7 @@ static const struct pci_8255_boardinfo pci_8255_boards[] = {
 	},
 };
 
-/* ripped from mite.h and mite_setup2() to avoid mite dependancy */
+/* ripped from mite.h and mite_setup2() to avoid mite dependency */
 #define MITE_IODWBSR	0xc0	 /* IO Device Window Base Size Register */
 #define WENAB		(1 << 7) /* window enable */
 

drivers/staging/comedi/drivers/addi_apci_1500.c

@@ -249,8 +249,8 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
 	 *
 	 *    Mask     Meaning
 	 * ----------  ------------------------------------------
-	 * 0x00000001  Event 1 has occured
-	 * 0x00000010  Event 2 has occured
+	 * 0x00000001  Event 1 has occurred
+	 * 0x00000010  Event 2 has occurred
 	 * 0x00000100  Counter/timer 1 has run down (not implemented)
 	 * 0x00001000  Counter/timer 2 has run down (not implemented)
 	 * 0x00010000  Counter 3 has run down (not implemented)

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -4,7 +4,7 @@
  * Author: Michal Dobes <dobes@tesnet.cz>
  *
  * Thanks to ZhenGang Shang <ZhenGang.Shang@Advantech.com.cn>
- * for testing and informations.
+ * for testing and information.
  *
  *  hardware driver for Advantech cards:
  *   card:   PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720, PCI-1731

drivers/staging/comedi/drivers/das08.c

@@ -408,7 +408,7 @@ int das08_common_attach(struct comedi_device *dev, unsigned long iobase)
 		if (ret)
 			return ret;
 
-		/* intialize all channels to 0V */
+		/* initialize all channels to 0V */
 		for (i = 0; i < s->n_chan; i++) {
 			s->readback[i] = s->maxdata / 2;
 			das08_ao_set_data(dev, i, s->readback[i]);

drivers/staging/comedi/drivers/dmm32at.c

@@ -30,7 +30,7 @@
  * This driver is for the Diamond Systems MM-32-AT board
  *	http://www.diamondsystems.com/products/diamondmm32at
  *
- * It is being used on serveral projects inside NASA, without
+ * It is being used on several projects inside NASA, without
  * problems so far. For analog input commands, TRIG_EXT is not
  * yet supported.
  */
@@ -391,7 +391,7 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 		/* start the clock and enable the interrupts */
 		dmm32at_setaitimer(dev, cmd->scan_begin_arg);
 	} else {
-		/* start the interrups and initiate a single scan */
+		/* start the interrupts and initiate a single scan */
 		outb(DMM32AT_INTCLK_ADINT, dev->iobase + DMM32AT_INTCLK_REG);
 		outb(0xff, dev->iobase + DMM32AT_AI_START_CONV_REG);
 	}

drivers/staging/comedi/drivers/ni_65xx.c

@@ -613,7 +613,7 @@ static int ni_65xx_intr_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
-/* ripped from mite.h and mite_setup2() to avoid mite dependancy */
+/* ripped from mite.h and mite_setup2() to avoid mite dependency */
 #define MITE_IODWBSR	0xc0	 /* IO Device Window Base Size Register */
 #define WENAB		(1 << 7) /* window enable */
 

drivers/staging/comedi/drivers/ni_670x.c

@@ -146,7 +146,7 @@ static int ni_670x_dio_insn_config(struct comedi_device *dev,
 	return insn->n;
 }
 
-/* ripped from mite.h and mite_setup2() to avoid mite dependancy */
+/* ripped from mite.h and mite_setup2() to avoid mite dependency */
 #define MITE_IODWBSR	0xc0	 /* IO Device Window Base Size Register */
 #define WENAB		(1 << 7) /* window enable */
 

drivers/staging/comedi/drivers/ni_labpc_pci.c

@@ -51,7 +51,7 @@ static const struct labpc_boardinfo labpc_pci_boards[] = {
 	},
 };
 
-/* ripped from mite.h and mite_setup2() to avoid mite dependancy */
+/* ripped from mite.h and mite_setup2() to avoid mite dependency */
 #define MITE_IODWBSR	0xc0	 /* IO Device Window Base Size Register */
 #define WENAB		(1 << 7) /* window enable */
 

drivers/staging/comedi/drivers/ni_tiocmd.c

@@ -366,7 +366,7 @@ static void ni_tio_acknowledge_and_confirm(struct ni_gpct *counter,
 	if (gxx_status & GI_GATE_ERROR(cidx)) {
 		ack |= GI_GATE_ERROR_CONFIRM(cidx);
 		if (gate_error) {
-			/*660x don't support automatic acknowledgement
+			/*660x don't support automatic acknowledgment
 			  of gate interrupt via dma read/write
 			   and report bogus gate errors */
 			if (counter->counter_dev->variant !=

drivers/staging/comedi/drivers/pcmuio.c

@@ -588,7 +588,7 @@ static int pcmuio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		s->insn_bits	= pcmuio_dio_insn_bits;
 		s->insn_config	= pcmuio_dio_insn_config;
 
-		/* subdevices 0 and 2 can suppport interrupts */
+		/* subdevices 0 and 2 can support interrupts */
 		if ((i == 0 && dev->irq) || (i == 2 && devpriv->irq2)) {
 			/* setup the interrupt subdevice */
 			dev->read_subdev = s;

drivers/staging/comedi/drivers/unioxx5.c

@@ -266,7 +266,7 @@ static int __unioxx5_analog_write(struct comedi_subdevice *s,
 	/* sending for bytes to module(one byte per cycle iteration) */
 	for (i = 0; i < 4; i++) {
 		while (!((inb(usp->usp_iobase + 0)) & TxBE))
-			;	/* waits while writting will be allowed */
+			;	/* waits while writing will be allowed */
 		outb(usp->usp_extra_data[module][i], usp->usp_iobase + 6);
 	}
 
@@ -399,7 +399,7 @@ static int __unioxx5_subdev_init(struct comedi_device *dev,
 		outb(i + 1, iobase + 5);
 		outb('H', iobase + 6);	/* requests EEPROM world */
 		while (!(inb(iobase + 0) & TxBE))
-			;	/* waits while writting will be allowed */
+			;	/* waits while writing will be allowed */
 		outb(0, iobase + 6);
 
 		/* waits while reading of two bytes will be allowed */