Commit 99a845a3 authored by Ben Skeggs's avatar Ben Skeggs

drm/nouveau/disp/nv50-gt21x: remove workaround for dp->tmds hotplug issues

This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.

Testing of the board this was originally written for seems to agree.
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 32a232c5
...@@ -316,31 +316,6 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf) ...@@ -316,31 +316,6 @@ exec_clkcmp(struct nv50_disp *disp, int head, int id, u32 pclk, u32 *conf)
return outp; return outp;
} }
/* If programming a TMDS output on a SOR that can also be configured for
* DisplayPort, make sure NV50_SOR_DP_CTRL_ENABLE is forced off.
*
* It looks like the VBIOS TMDS scripts make an attempt at this, however,
* the VBIOS scripts on at least one board I have only switch it off on
* link 0, causing a blank display if the output has previously been
* programmed for DisplayPort.
*/
static void
nv50_disp_intr_unk40_0_tmds(struct nv50_disp *disp,
struct dcb_output *outp)
{
struct nvkm_device *device = disp->base.engine.subdev.device;
struct nvkm_bios *bios = device->bios;
const int link = !(outp->sorconf.link & 1);
const int or = ffs(outp->or) - 1;
const u32 loff = (or * 0x800) + (link * 0x80);
const u16 mask = (outp->sorconf.link << 6) | outp->or;
struct dcb_output match;
u8 ver, hdr;
if (dcb_outp_match(bios, DCB_OUTPUT_DP, mask, &ver, &hdr, &match))
nvkm_mask(device, 0x61c10c + loff, 0x00000001, 0x00000000);
}
static void static void
nv50_disp_intr_unk40_0(struct nv50_disp *disp, int head) nv50_disp_intr_unk40_0(struct nv50_disp *disp, int head)
{ {
...@@ -353,8 +328,6 @@ nv50_disp_intr_unk40_0(struct nv50_disp *disp, int head) ...@@ -353,8 +328,6 @@ nv50_disp_intr_unk40_0(struct nv50_disp *disp, int head)
if (!outp) if (!outp)
return; return;
if (outp->info.location == 0 && outp->info.type == DCB_OUTPUT_TMDS)
nv50_disp_intr_unk40_0_tmds(disp, &outp->info);
nv50_disp_dptmds_war_3(disp, &outp->info); nv50_disp_dptmds_war_3(disp, &outp->info);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment