Merge tag 'v5.6-rockchip-dts64-1' of...

Merge tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

New boards are the Radxa Rock Pi N10 using the VMARC SOM and Dalang
carrier board, separate versions for the two rockpro64 hardware revisions
which switched a pin between revisions. The rockpro64 also got
bluetooth support now.

The px30 got a lot of attention with dsi, gpu and thermal support.
Similarly the rk3399-roc-pc board also got attention with mtd flash,
sdr104 mode, hdmi sound, gpu and a lot of other smaller improvements.

Other than that there is a new gpu-cooling device for rk3399 a cpu
idle-state for rk3328 and more small improvements across a number
of boards.

* tag 'v5.6-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (37 commits)
  arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc
  arm64: dts: rockchip: rk3399-hugsun-x99: remove supports-sd and supports-emmc options
  arm64: dts: rockchip: rk3399-firefly: remove num-slots from &sdio0 node
  arm64: dts: rockchip: Add PX30 LVDS
  arm64: dts: rockchip: add dsi controller for px30
  arm64: dts: rockchip: Add PX30 DSI DPHY
  arm64: dts: rockchip: Add RK3328 idle state
  arm64: dts: rockchip: remove identical &uart0 node from rk3368-lion-haikou
  arm64: dts: rockchip: Add Radxa Rock Pi N10 initial support
  ARM: dts: rockchip: Add Radxa Dalang Carrier board
  arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
  dt-bindings: arm: rockchip: Add Rock Pi N10 binding
  arm64: dts: rockchip: hook up bluetooth at uart0 on rockpro64
  arm64: dts: rockchip: enable wifi module at sdio0 on rockpro64
  arm64: dts: rockchip: split rk3399-rockpro64 for v2 and v2.1 boards
  arm64: dts: rockchip: enable the gpu on px30-evb
  arm64: dts: rockchip: add the gpu for px30
  dt-bindings: gpu: mali-bifrost: Add Rockchip PX30
  arm64: dts: rockchip: Add GPU cooling device for RK3399
  arm64: dts: rockchip: Add regulators for PCIe for Radxa Rock Pi 4 board
  ...

Link: https://lore.kernel.org/r/5115625.yBEeHQkg2z@philSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/rockchip.yaml

@@ -409,6 +409,9 @@ properties:
 
       - description: Pine64 RockPro64
         items:
+          - enum:
+              - pine64,rockpro64-v2.1
+              - pine64,rockpro64-v2.0
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
@@ -422,6 +425,12 @@ properties:
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK Pi N10
+        items:
+          - const: radxa,rockpi-n10
+          - const: vamrs,rk3399pro-vmarc-som
+          - const: rockchip,rk3399pro
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square

Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

@@ -18,6 +18,7 @@ properties:
       - enum:
           - amlogic,meson-g12a-mali
           - realtek,rtd1619-mali
+          - rockchip,px30-mali
       - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
 
   reg:

arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/Makefile

@@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb

arch/arm64/boot/dts/rockchip/px30-evb.dts

@@ -132,6 +132,11 @@ &gmac {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_log>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -485,6 +490,12 @@ &sdio {
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
+};
+
 &u2phy {
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/px30.dtsi

@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/px30-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,px30";
@@ -113,16 +114,11 @@ cpu0_opp_table: cpu0-opp-table {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000 950000 1350000>;
-			clock-latency-ns = <40000>;
-			opp-suspend;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1350000>;
 			clock-latency-ns = <40000>;
+			opp-suspend;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
@@ -181,6 +177,55 @@ timer {
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+		};
+	};
+
 	xin24m: xin24m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -365,6 +410,33 @@ io_domains: io-domains {
 			compatible = "rockchip,px30-io-voltage-domain";
 			status = "disabled";
 		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_vopb_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+
+				lvds_vopl_in: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
 	};
 
 	uart1: serial@ff158000 {
@@ -645,6 +717,26 @@ dmac: dmac@ff240000 {
 		};
 	};
 
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	saradc: saradc@ff288000 {
 		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
 		reg = <0x0 0xff288000 0x0 0x100>;
@@ -755,6 +847,18 @@ u2phy_otg: otg-port {
 		};
 	};
 
+	dsi_dphy: phy@ff2e0000 {
+		compatible = "rockchip,px30-dsi-dphy";
+		reg = <0x0 0xff2e0000 0x0 0x10000>;
+		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
+		clock-names = "ref", "pclk";
+		resets = <&cru SRST_MIPIDSIPHY_P>;
+		reset-names = "apb";
+		#phy-cells = <0>;
+		power-domains = <&power PX30_PD_VO>;
+		status = "disabled";
+	};
+
 	usb20_otg: usb@ff300000 {
 		compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
 			     "snps,dwc2";
@@ -865,6 +969,57 @@ emmc: dwmmc@ff390000 {
 		status = "disabled";
 	};
 
+	gpu: gpu@ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		status = "disabled";
+	};
+
+	dsi: dsi@ff450000 {
+		compatible = "rockchip,px30-mipi-dsi";
+		reg = <0x0 0xff450000 0x0 0x10000>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
+		phys = <&dsi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_dsi>;
+				};
+
+				dsi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_dsi>;
+				};
+			};
+		};
+	};
+
 	vopb: vop@ff460000 {
 		compatible = "rockchip,px30-vop-big";
 		reg = <0x0 0xff460000 0x0 0xefc>;
@@ -882,6 +1037,16 @@ vopb: vop@ff460000 {
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopb>;
+			};
+
+			vopb_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
 		};
 	};
 
@@ -914,6 +1079,16 @@ vopl: vop@ff470000 {
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_dsi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dsi_in_vopl>;
+			};
+
+			vopl_out_lvds: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
 		};
 	};
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -41,6 +41,7 @@ cpu0: cpu@0 {
 			reg = <0x0 0x0>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -53,6 +54,7 @@ cpu1: cpu@1 {
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -65,6 +67,7 @@ cpu2: cpu@2 {
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -77,12 +80,26 @@ cpu3: cpu@3 {
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_SLEEP>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <120>;
+				exit-latency-us = <250>;
+				min-residency-us = <900>;
+			};
+		};
+
 		l2: l2-cache0 {
 			compatible = "cache";
 		};

arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts

@@ -83,12 +83,6 @@ &spi2 {
 	status = "okay";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-	status = "okay";
-};
-
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

@@ -206,7 +206,7 @@ vdd_log: vdd-log {
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <430000>;
 		regulator-max-microvolt = <1400000>;
 		vin-supply = <&vcc_sys>;
 	};
@@ -660,7 +660,6 @@ &sdio0 {
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;

arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts

@@ -556,7 +556,6 @@ &saradc {
 &sdmmc {
 	clock-frequency = <150000000>;
 	clock-freq-min-max = <200000 150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
@@ -572,7 +571,6 @@ &sdhci {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
-	supports-emmc;
 	non-removable;
 	keep-power-in-suspend;
 	status = "okay";

arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts

@@ -94,31 +94,9 @@ map3 {
 	};
 };
 
-&gpu_thermal {
-	trips {
-		gpu_warm: gpu_warm {
-			temperature = <55000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-
-		gpu_hot: gpu_hot {
-			temperature = <65000>;
-			hysteresis = <2000>;
-			type = "active";
-		};
-	};
-	cooling-maps {
-		map1 {
-			trip = <&gpu_warm>;
-			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
-		};
-
-		map2 {
-			trip = <&gpu_hot>;
-			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
-		};
-	};
+&pcie0 {
+	num-lanes = <4>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
 };
 
 &pinctrl {

arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi

@@ -48,7 +48,7 @@ vcc5v0_sys: vcc5v0-sys {
 	};
 
 	/* switched by pmic_sleep */
-	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+	vcc1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
 		regulator-boot-on;
@@ -71,6 +71,27 @@ vcc3v0_sd: vcc3v0-sd {
 		vin-supply = <&vcc3v3_sys>;
 	};
 
+	/*
+	 * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
+	 * drives the enable pin, but we can't quite model that.
+	 */
+	vcca0v9_s3: vcca0v9-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		regulator-name = "vcca0v9_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
+	/* As above, actually supplied by vcc3v3_sys */
+	vcca1v8_s3: vcca1v8-s3 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "vcca1v8_s3";
+		vin-supply = <&vcc1v8_s3>;
+	};
+
 	vbus_typec: vbus-typec {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <5000000>;
@@ -485,7 +506,9 @@ &pcie_phy {
 &pcie0 {
 	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	max-link-speed = <2>;
-	num-lanes = <4>;
+	num-lanes = <2>;
+	vpcie0v9-supply = <&vcca0v9_s3>;
+	vpcie1v8-supply = <&vcca1v8_s3>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts

@@ -32,8 +32,6 @@ vcc3v3_pcie: vcc3v3-pcie {
 		gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc3v3_pcie_en>;
-		regulator-always-on;
-		regulator-boot-on;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_12v>;
@@ -50,6 +48,8 @@ &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_perst>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
+	vpcie1v8-supply = <&vcc1v8_pmu>;
+	vpcie0v9-supply = <&vcca_0v9>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi

@@ -110,20 +110,6 @@ vcc_vbus_typec0: vcc-vbus-typec0 {
 		regulator-max-microvolt = <5000000>;
 	};
 
-	/*
-	 * should be placed inside mp8859, but not until mp8859 has
-	 * its own dt-binding.
-	 */
-	dc_12v: mp8859-dcdc1 {
-		compatible = "regulator-fixed";
-		regulator-name = "dc_12v";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		vin-supply = <&vcc_vbus_typec0>;
-	};
-
 	/* switched by pmic_sleep */
 	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		compatible = "regulator-fixed";
@@ -135,6 +121,19 @@ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 		vin-supply = <&vcc_1v8>;
 	};
 
+	vcc3v0_sd: vcc3v0-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v0_sd_en>;
+		regulator-name = "vcc3v0_sd";
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -145,6 +144,16 @@ vcc3v3_sys: vcc3v3-sys {
 		vin-supply = <&dc_12v>;
 	};
 
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
@@ -153,7 +162,6 @@ vcc5v0_host: vcc5v0-host-regulator {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
 		regulator-name = "vcc5v0_host";
-		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
 
@@ -175,7 +183,6 @@ vcc_sys: vcc-sys {
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc_sys_en>;
 		regulator-name = "vcc_sys";
-		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -188,9 +195,9 @@ vdd_log: vdd-log {
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <800000>;
+		regulator-min-microvolt = <450000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc3v3_sys>;
+		pwm-supply = <&vcc3v3_sys>;
 	};
 };
 
@@ -238,6 +245,11 @@ &gmac {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
@@ -245,6 +257,10 @@ &hdmi {
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -360,7 +376,6 @@ regulator-state-mem {
 
 			vcc_sdio: LDO_REG4 {
 				regulator-name = "vcc_sdio";
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3000000>;
@@ -465,8 +480,6 @@ vdd_gpu: regulator@41 {
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
 		regulator-ramp-delay = <1000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vcc3v3_sys>;
 
 		regulator-state-mem {
@@ -519,6 +532,24 @@ fusb0: usb-typec@22 {
 		vbus-supply = <&vcc_vbus_typec0>;
 		status = "okay";
 	};
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vcc_vbus_typec0>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <12000000>;
+			};
+		};
+	};
 };
 
 &i2s0 {
@@ -559,7 +590,7 @@ pwr_key_l: pwr-key-l {
 
 	lcd-panel {
 		lcd_panel_reset: lcd-panel-reset {
-			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
@@ -593,6 +624,12 @@ wifi_enable_h: wifi-enable-h {
 		};
 	};
 
+	sdmmc {
+		vcc3v0_sd_en: vcc3v0-sd-en {
+			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -645,24 +682,34 @@ &saradc {
 
 &sdmmc {
 	bus-width = <4>;
-	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v0_sd>;
+	vqmmc-supply = <&vcc_sdio>;
 	status = "okay";
 };
 
 &sdhci {
 	bus-width = <8>;
-	mmc-hs400-1_8v;
-	mmc-hs400-enhanced-strobe;
 	non-removable;
 	status = "okay";
 };
 
+&spi1 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &tcphy0 {
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts

@@ -53,6 +53,16 @@ vcc5v0_sys: vcc-sys {
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vcc3v3_pcie: vcc3v3-pcie-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -463,6 +473,22 @@ &pmu_io_domains {
 	pmu1830-supply = <&vcc_3v0>;
 };
 
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcc_1v8>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
 &pinctrl {
 	bt {
 		bt_enable_h: bt-enable-h {

arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi

@@ -76,6 +76,15 @@ vcc5v0_host: vcc5v0-host-regulator {
 		regulator-always-on;
 		vin-supply = <&vcc5v0_sys>;
 	};
+
+	vcc_0v9: vcc-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
 };
 
 &cpu_l0 {
@@ -384,6 +393,8 @@ &pcie0 {
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie0v9-supply = <&vcc_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
+ */
+
+/dts-v1/;
+#include "rk3399-rockpro64.dtsi"
+
+/ {
+	model = "Pine64 RockPro64 v2.0";
+	compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399";
+};
+
+&i2c1 {
+	es8316: codec@10 {
+		compatible = "everest,es8316";
+		reg = <0x10>;
+		clocks = <&cru SCLK_I2S_8CH_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+
+		port {
+			es8316_p0_0: endpoint {
+				remote-endpoint = <&i2s1_p0_0>;
+			};
+		};
+	};
+};

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -828,6 +828,14 @@ gpu_crit: gpu_crit {
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -1887,6 +1895,7 @@ gpu: gpu@ff9a0000 {
 			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>;
 		interrupt-names = "gpu", "job", "mmu";
 		clocks = <&cru ACLK_GPU>;
+		#cooling-cells = <2>;
 		power-domains = <&power RK3399_PD_GPU>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+#include "rk3399pro-vmarc-som.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+
+/ {
+	model = "Radxa ROCK Pi N10";
+	compatible = "radxa,rockpi-n10", "rockchip,rk3399pro";
+};

arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};