Commit 9a796cd2 authored by Marcel Ziswiler's avatar Marcel Ziswiler Committed by Thierry Reding

ARM: tegra: colibri_t20: iris: display controller rgb panel support

Add display controller parallel RGB panel support incl. backlight PWM.
Signed-off-by: default avatarMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 992cf09b
......@@ -21,6 +21,13 @@ chosen {
};
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
hdmi@54280000 {
status = "okay";
hdmi-supply = <&reg_5v0>;
......@@ -99,6 +106,10 @@ serial@70006300 {
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
......@@ -149,6 +160,26 @@ sdhci@c8000600 {
no-1-8-v;
};
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
power-supply = <&reg_3v3>;
pwms = <&pwm 0 5000000>; /* PWM<A> */
};
panel: panel {
/*
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
backlight = <&backlight>;
power-supply = <&reg_3v3>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment