Commit 9a821f5d authored by Daniel Drake's avatar Daniel Drake Committed by John W. Linville

libertas: add sd8686 reset_card support

At http://dev.laptop.org/ticket/10748 we are seeing a case of the
libertas firmware randomly stopping responding to commands after
resume. Careful monitoring of communications indicates a firmware or
hardware bug, which has been reported to Marvell.

Work around this issue by adding a reset_card method; this is
automatically called when command timeouts are detected and provides an
instant recovery to this situation.
Signed-off-by: default avatarDaniel Drake <dsd@laptop.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 43a1c272
......@@ -892,6 +892,37 @@ static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
}
static struct mmc_host *reset_host;
static void if_sdio_reset_card_worker(struct work_struct *work)
{
/*
* The actual reset operation must be run outside of lbs_thread. This
* is because mmc_remove_host() will cause the device to be instantly
* destroyed, and the libertas driver then needs to end lbs_thread,
* leading to a deadlock.
*
* We run it in a workqueue totally independent from the if_sdio_card
* instance for that reason.
*/
pr_info("Resetting card...");
mmc_remove_host(reset_host);
mmc_add_host(reset_host);
}
static DECLARE_WORK(card_reset_work, if_sdio_reset_card_worker);
static void if_sdio_reset_card(struct lbs_private *priv)
{
struct if_sdio_card *card = priv->card;
if (work_pending(&card_reset_work))
return;
reset_host = card->func->card->host;
schedule_work(&card_reset_work);
}
/*******************************************************************/
/* SDIO callbacks */
/*******************************************************************/
......@@ -1065,6 +1096,7 @@ static int if_sdio_probe(struct sdio_func *func,
priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
priv->reset_card = if_sdio_reset_card;
sdio_claim_host(func);
......@@ -1301,6 +1333,8 @@ static void __exit if_sdio_exit_module(void)
/* Set the flag as user is removing this module. */
user_rmmod = 1;
cancel_work_sync(&card_reset_work);
sdio_unregister_driver(&if_sdio_driver);
lbs_deb_leave(LBS_DEB_SDIO);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment