Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

arch/ia64/configs/sn2_defconfig

@@ -99,7 +99,7 @@ CONFIG_ACPI_DEALLOCATE_IRQ=y
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
-# CONFIG_EFI_PCDP is not set
+CONFIG_EFI_PCDP=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
@@ -650,7 +650,7 @@ CONFIG_MMTIMER=y
 #
 # Console display driver support
 #
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 
 #

arch/ia64/configs/tiger_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-20050621
-# Tue Jun 21 14:03:24 2005
+# Linux kernel version: 2.6.13-rc1-20050629
+# Wed Jun 29 15:28:12 2005
 #
 
 #
@@ -80,18 +80,29 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 # CONFIG_NUMA is not set
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_IA64_CYCLONE=y
 CONFIG_IOSAPIC=y
+# CONFIG_IA64_SGI_SN_XP is not set
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -257,6 +268,7 @@ CONFIG_BLK_DEV_CMD64X=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -395,6 +407,7 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -407,6 +420,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
@@ -598,9 +613,7 @@ CONFIG_GAMEPORT=m
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
 # CONFIG_GAMEPORT_EMU10K1 is not set
-# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
-# CONFIG_GAMEPORT_CS461X is not set
 
 #
 # Character devices
@@ -629,7 +642,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
 # CONFIG_SERIAL_8250_RSA is not set
 
 #
@@ -743,6 +755,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -779,9 +792,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -838,7 +853,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -856,6 +871,10 @@ CONFIG_USB_HIDINPUT=y
 #
 # CONFIG_INFINIBAND is not set
 
+#
+# SN Devices
+#
+
 #
 # File systems
 #
@@ -863,6 +882,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -922,7 +942,6 @@ CONFIG_NTFS_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -953,15 +972,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -1069,6 +1091,7 @@ CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1090,7 +1113,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set

arch/ia64/hp/common/sba_iommu.c

@@ -156,10 +156,13 @@
 */
 #define DELAYED_RESOURCE_CNT	64
 
+#define PCI_DEVICE_ID_HP_SX2000_IOC	0x12ec
+
 #define ZX1_IOC_ID	((PCI_DEVICE_ID_HP_ZX1_IOC << 16) | PCI_VENDOR_ID_HP)
 #define ZX2_IOC_ID	((PCI_DEVICE_ID_HP_ZX2_IOC << 16) | PCI_VENDOR_ID_HP)
 #define REO_IOC_ID	((PCI_DEVICE_ID_HP_REO_IOC << 16) | PCI_VENDOR_ID_HP)
 #define SX1000_IOC_ID	((PCI_DEVICE_ID_HP_SX1000_IOC << 16) | PCI_VENDOR_ID_HP)
+#define SX2000_IOC_ID	((PCI_DEVICE_ID_HP_SX2000_IOC << 16) | PCI_VENDOR_ID_HP)
 
 #define ZX1_IOC_OFFSET	0x1000	/* ACPI reports SBA, we want IOC */
 
@@ -1726,6 +1729,7 @@ static struct ioc_iommu ioc_iommu_info[] __initdata = {
 	{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
 	{ ZX2_IOC_ID, "zx2", NULL },
 	{ SX1000_IOC_ID, "sx1000", NULL },
+	{ SX2000_IOC_ID, "sx2000", NULL },
 };
 
 static struct ioc * __init

arch/ia64/hp/sim/simserial.c

@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
+#include <linux/sysrq.h>
 
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
@@ -149,12 +150,17 @@ static  void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
 				seen_esc = 2;
 				continue;
 			} else if ( seen_esc == 2 ) {
-				if ( ch == 'P' ) show_state();		/* F1 key */
-#ifdef CONFIG_KDB
-				if ( ch == 'S' )
-					kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+				if ( ch == 'P' ) /* F1 */
+					show_state();
+#ifdef CONFIG_MAGIC_SYSRQ
+				if ( ch == 'S' ) { /* F4 */
+					do
+						ch = ia64_ssc(0, 0, 0, 0,
+							      SSC_GETCHAR);
+					while (!ch);
+					handle_sysrq(ch, regs, NULL);
+				}
 #endif
-
 				seen_esc = 0;
 				continue;
 			}

arch/ia64/kernel/entry.S

@@ -470,18 +470,6 @@ ENTRY(load_switch_stack)
 	br.cond.sptk.many b7
 END(load_switch_stack)
 
-GLOBAL_ENTRY(__ia64_syscall)
-	.regstk 6,0,0,0
-	mov r15=in5				// put syscall number in place
-	break __BREAK_SYSCALL
-	movl r2=errno
-	cmp.eq p6,p7=-1,r10
-	;;
-(p6)	st4 [r2]=r8
-(p6)	mov r8=-1
-	br.ret.sptk.many rp
-END(__ia64_syscall)
-
 GLOBAL_ENTRY(execve)
 	mov r15=__NR_execve			// put syscall number in place
 	break __BREAK_SYSCALL
@@ -637,7 +625,7 @@ END(ia64_ret_from_syscall)
  *	      r8-r11: restored (syscall return value(s))
  *		 r12: restored (user-level stack pointer)
  *		 r13: restored (user-level thread pointer)
- *		 r14: cleared
+ *		 r14: set to __kernel_syscall_via_epc
  *		 r15: restored (syscall #)
  *	     r16-r17: cleared
  *		 r18: user-level b6
@@ -658,7 +646,7 @@ END(ia64_ret_from_syscall)
  *		  pr: restored (user-level pr)
  *		  b0: restored (user-level rp)
  *	          b6: restored
- *		  b7: cleared
+ *		  b7: set to __kernel_syscall_via_epc
  *	     ar.unat: restored (user-level ar.unat)
  *	      ar.pfs: restored (user-level ar.pfs)
  *	      ar.rsc: restored (user-level ar.rsc)
@@ -704,72 +692,79 @@ ENTRY(ia64_leave_syscall)
 	;;
 (p6)	ld4 r31=[r18]				// load current_thread_info()->flags
 	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
-	mov b7=r0		// clear b7
+	nop.i 0
 	;;
-	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
+	mov r16=ar.bsp				// M2  get existing backing store pointer
 	ld8 r18=[r2],PT(R9)-PT(B6)		// load b6
 (p6)	and r15=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
 	;;
-	mov r16=ar.bsp				// M2  get existing backing store pointer
+	ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)	// load ar.bspstore (may be garbage)
 (p6)	cmp4.ne.unc p6,p0=r15, r0		// any special work pending?
 (p6)	br.cond.spnt .work_pending_syscall
 	;;
 	// start restoring the state saved on the kernel stack (struct pt_regs):
 	ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
 	ld8 r11=[r3],PT(CR_IIP)-PT(R11)
-	mov f6=f0		// clear f6
+(pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2 initiate turning off of interrupt and interruption collection
-	mov f9=f0		// clear f9
+	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
-	ld8 r29=[r2],16		// load cr.ipsr
-	ld8 r28=[r3],16			// load cr.iip
-	mov f8=f0		// clear f8
+	ld8 r29=[r2],16		// M0|1 load cr.ipsr
+	ld8 r28=[r3],16		// M0|1 load cr.iip
+	mov r22=r0		// A    clear r22
 	;;
 	ld8 r30=[r2],16		// M0|1 load cr.ifs
 	ld8 r25=[r3],16		// M0|1 load ar.unat
-	cmp.eq p9,p0=r0,r0	// set p9 to indicate that we should restore cr.ifs
+(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
 	;;
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
-	mov f10=f0		// clear f10
+(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	nop 0
 	;;
-	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // load b0
-	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// load ar.rsc
-	mov f11=f0		// clear f11
+	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
+	ld8 r27=[r3],PT(PR)-PT(AR_RSC)	// M0|1 load ar.rsc
+	mov f6=f0			// F    clear f6
 	;;
-	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// load ar.rnat (may be garbage)
-	ld8 r31=[r3],PT(R1)-PT(PR)		// load predicates
-(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+	ld8 r24=[r2],PT(AR_FPSR)-PT(AR_RNAT)	// M0|1 load ar.rnat (may be garbage)
+	ld8 r31=[r3],PT(R1)-PT(PR)		// M0|1 load predicates
+	mov f7=f0				// F    clear f7
 	;;
-	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// load ar.fpsr
-	ld8.fill r1=[r3],16	// load r1
-(pUStk) mov r17=1
+	ld8 r20=[r2],PT(R12)-PT(AR_FPSR)	// M0|1 load ar.fpsr
+	ld8.fill r1=[r3],16			// M0|1 load r1
+(pUStk) mov r17=1				// A
 	;;
-	srlz.d			// M0  ensure interruption collection is off
-	ld8.fill r13=[r3],16
-	mov f7=f0		// clear f7
+(pUStk) st1 [r14]=r17				// M2|3
+	ld8.fill r13=[r3],16			// M0|1
+	mov f8=f0				// F    clear f8
 	;;
-	ld8.fill r12=[r2]	// restore r12 (sp)
-	mov.m ar.ssd=r0		// M2 clear ar.ssd
-	mov r22=r0		// clear r22
+	ld8.fill r12=[r2]			// M0|1 restore r12 (sp)
+	ld8.fill r15=[r3]			// M0|1 restore r15
+	mov b6=r18				// I0   restore b6
 
-	ld8.fill r15=[r3]	// restore r15
-(pUStk) st1 [r14]=r17
-	addl r3=THIS_CPU(ia64_phys_stacked_size_p8),r0
+	addl r17=THIS_CPU(ia64_phys_stacked_size_p8),r0 // A
+	mov f9=f0					// F    clear f9
+(pKStk) br.cond.dpnt.many skip_rbs_switch		// B
+
+	srlz.d				// M0   ensure interruption collection is off (for cover)
+	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
+	cover				// B    add current frame into dirty partition & set cr.ifs
 	;;
-(pUStk)	ld4 r17=[r3]		// r17 = cpu_data->phys_stacked_size_p8
-	mov.m ar.csd=r0		// M2 clear ar.csd
-	mov b6=r18		// I0  restore b6
+(pUStk) ld4 r17=[r17]			// M0|1 r17 = cpu_data->phys_stacked_size_p8
+	mov r19=ar.bsp			// M2   get new backing store pointer
+	mov f10=f0			// F    clear f10
+
+	nop.m 0
+	movl r14=__kernel_syscall_via_epc // X
 	;;
-	mov r14=r0		// clear r14
-	shr.u r18=r19,16	// I0|1 get byte size of existing "dirty" partition
-(pKStk) br.cond.dpnt.many skip_rbs_switch
+	mov.m ar.csd=r0			// M2   clear ar.csd
+	mov.m ar.ccv=r0			// M2   clear ar.ccv
+	mov b7=r14			// I0   clear b7 (hint with __kernel_syscall_via_epc)
 
-	mov.m ar.ccv=r0		// clear ar.ccv
-(pNonSys) br.cond.dpnt.many dont_preserve_current_frame
-	br.cond.sptk.many rbs_switch
+	mov.m ar.ssd=r0			// M2   clear ar.ssd
+	mov f11=f0			// F    clear f11
+	br.cond.sptk.many rbs_switch	// B
 END(ia64_leave_syscall)
 
 #ifdef CONFIG_IA32_SUPPORT
@@ -885,7 +880,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	ldf.fill f7=[r2],PT(F11)-PT(F7)
 	ldf.fill f8=[r3],32
 	;;
-	srlz.i			// ensure interruption collection is off
+	srlz.d	// ensure that inter. collection is off (VHPT is don't care, since text is pinned)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
@@ -945,11 +940,10 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-
-rbs_switch:
 	cover				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
+rbs_switch:
 	sub r16=r16,r18			// krbs = old bsp - size of dirty partition
 	cmp.ne p9,p0=r0,r0		// clear p9 to skip restore of cr.ifs
 	;;
@@ -1024,14 +1018,14 @@ rse_clear_invalid:
 	mov loc5=0
 	mov loc6=0
 	mov loc7=0
-(pRecurse) br.call.sptk.few b0=rse_clear_invalid
+(pRecurse) br.call.dptk.few b0=rse_clear_invalid
 	;;
 	mov loc8=0
 	mov loc9=0
 	cmp.ne pReturn,p0=r0,in1	// if recursion count != 0, we need to do a br.ret
 	mov loc10=0
 	mov loc11=0
-(pReturn) br.ret.sptk.many b0
+(pReturn) br.ret.dptk.many b0
 #endif /* !CONFIG_ITANIUM */
 #	undef pRecurse
 #	undef pReturn

arch/ia64/kernel/fsys.S

@@ -531,93 +531,114 @@ GLOBAL_ENTRY(fsys_bubble_down)
 	.altrp b6
 	.body
 	/*
-	 * We get here for syscalls that don't have a lightweight handler.  For those, we
-	 * need to bubble down into the kernel and that requires setting up a minimal
-	 * pt_regs structure, and initializing the CPU state more or less as if an
-	 * interruption had occurred.  To make syscall-restarts work, we setup pt_regs
-	 * such that cr_iip points to the second instruction in syscall_via_break.
-	 * Decrementing the IP hence will restart the syscall via break and not
-	 * decrementing IP will return us to the caller, as usual.  Note that we preserve
-	 * the value of psr.pp rather than initializing it from dcr.pp.  This makes it
-	 * possible to distinguish fsyscall execution from other privileged execution.
+	 * We get here for syscalls that don't have a lightweight
+	 * handler.  For those, we need to bubble down into the kernel
+	 * and that requires setting up a minimal pt_regs structure,
+	 * and initializing the CPU state more or less as if an
+	 * interruption had occurred.  To make syscall-restarts work,
+	 * we setup pt_regs such that cr_iip points to the second
+	 * instruction in syscall_via_break.  Decrementing the IP
+	 * hence will restart the syscall via break and not
+	 * decrementing IP will return us to the caller, as usual.
+	 * Note that we preserve the value of psr.pp rather than
+	 * initializing it from dcr.pp.  This makes it possible to
+	 * distinguish fsyscall execution from other privileged
+	 * execution.
 	 *
 	 * On entry:
-	 *	- normal fsyscall handler register usage, except that we also have:
+	 *	- normal fsyscall handler register usage, except
+	 *	  that we also have:
 	 *	- r18: address of syscall entry point
 	 *	- r21: ar.fpsr
 	 *	- r26: ar.pfs
 	 *	- r27: ar.rsc
 	 *	- r29: psr
+	 *
+	 * We used to clear some PSR bits here but that requires slow
+	 * serialization.  Fortuntely, that isn't really necessary.
+	 * The rationale is as follows: we used to clear bits
+	 * ~PSR_PRESERVED_BITS in PSR.L.  Since
+	 * PSR_PRESERVED_BITS==PSR.{UP,MFL,MFH,PK,DT,PP,SP,RT,IC}, we
+	 * ended up clearing PSR.{BE,AC,I,DFL,DFH,DI,DB,SI,TB}.
+	 * However,
+	 *
+	 * PSR.BE : already is turned off in __kernel_syscall_via_epc()
+	 * PSR.AC : don't care (kernel normally turns PSR.AC on)
+	 * PSR.I  : already turned off by the time fsys_bubble_down gets
+	 *	    invoked
+	 * PSR.DFL: always 0 (kernel never turns it on)
+	 * PSR.DFH: don't care --- kernel never touches f32-f127 on its own
+	 *	    initiative
+	 * PSR.DI : always 0 (kernel never turns it on)
+	 * PSR.SI : always 0 (kernel never turns it on)
+	 * PSR.DB : don't care --- kernel never enables kernel-level
+	 *	    breakpoints
+	 * PSR.TB : must be 0 already; if it wasn't zero on entry to
+	 *          __kernel_syscall_via_epc, the branch to fsys_bubble_down
+	 *          will trigger a taken branch; the taken-trap-handler then
+	 *          converts the syscall into a break-based system-call.
 	 */
-#	define PSR_PRESERVED_BITS	(IA64_PSR_UP | IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_PK \
-					 | IA64_PSR_DT | IA64_PSR_PP | IA64_PSR_SP | IA64_PSR_RT \
-					 | IA64_PSR_IC)
 	/*
-	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.  The rest we have
-	 * to synthesize.
+	 * Reading psr.l gives us only bits 0-31, psr.it, and psr.mc.
+	 * The rest we have to synthesize.
 	 */
-#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT) | (0x1 << IA64_PSR_RI_BIT) \
+#	define PSR_ONE_BITS		((3 << IA64_PSR_CPL0_BIT)	\
+					 | (0x1 << IA64_PSR_RI_BIT)	\
 					 | IA64_PSR_BN | IA64_PSR_I)
 
-	invala
-	movl r8=PSR_ONE_BITS
+	invala					// M0|1
+	movl r14=ia64_ret_from_syscall		// X
 
-	mov r25=ar.unat			// save ar.unat (5 cyc)
-	movl r9=PSR_PRESERVED_BITS
+	nop.m 0
+	movl r28=__kernel_syscall_via_break	// X	create cr.iip
+	;;
 
-	mov ar.rsc=0			// set enforced lazy mode, pl 0, little-endian, loadrs=0
-	movl r28=__kernel_syscall_via_break
+	mov r2=r16				// A    get task addr to addl-addressable register
+	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 // A
+	mov r31=pr				// I0   save pr (2 cyc)
 	;;
-	mov r23=ar.bspstore		// save ar.bspstore (12 cyc)
-	mov r31=pr			// save pr (2 cyc)
-	mov r20=r1			// save caller's gp in r20
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	addl r22=IA64_RBS_OFFSET,r2		// A    compute base of RBS
+	add r3=TI_FLAGS+IA64_TASK_SIZE,r2	// A
 	;;
-	mov r2=r16			// copy current task addr to addl-addressable register
-	and r9=r9,r29
-	mov r19=b6			// save b6 (2 cyc)
+	ld4 r3=[r3]				// M0|1 r3 = current_thread_info()->flags
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch register backing-store
+	nop.i 0
 	;;
-	mov psr.l=r9			// slam the door (17 cyc to srlz.i)
-	or r29=r8,r29			// construct cr.ipsr value to save
-	addl r22=IA64_RBS_OFFSET,r2	// compute base of RBS
+	mov ar.rsc=0				// M2   set enforced lazy mode, pl 0, LE, loadrs=0
+	nop.m 0
+	nop.i 0
 	;;
-	// GAS reports a spurious RAW hazard on the read of ar.rnat because it thinks
-	// we may be reading ar.itc after writing to psr.l.  Avoid that message with
-	// this directive:
-	dv_serialize_data
-	mov.m r24=ar.rnat		// read ar.rnat (5 cyc lat)
-	lfetch.fault.excl.nt1 [r22]
-	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r2
-
-	// ensure previous insn group is issued before we stall for srlz.i:
+	mov r23=ar.bspstore			// M2 (12 cyc) save ar.bspstore
+	mov.m r24=ar.rnat			// M2 (5 cyc) read ar.rnat (dual-issues!)
+	nop.i 0
 	;;
-	srlz.i				// ensure new psr.l has been established
-	/////////////////////////////////////////////////////////////////////////////
-	////////// from this point on, execution is not interruptible anymore
-	/////////////////////////////////////////////////////////////////////////////
-	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2	// compute base of memory stack
-	cmp.ne pKStk,pUStk=r0,r0	// set pKStk <- 0, pUStk <- 1
+	mov ar.bspstore=r22			// M2 (6 cyc) switch to kernel RBS
+	movl r8=PSR_ONE_BITS			// X
 	;;
-	st1 [r16]=r0			// clear current->thread.on_ustack flag
-	mov ar.bspstore=r22		// switch to kernel RBS
-	mov b6=r18			// copy syscall entry-point to b6 (7 cyc)
-	add r3=TI_FLAGS+IA64_TASK_SIZE,r2
+	mov r25=ar.unat				// M2 (5 cyc) save ar.unat
+	mov r19=b6				// I0   save b6 (2 cyc)
+	mov r20=r1				// A    save caller's gp in r20
 	;;
-	ld4 r3=[r3]				// r2 = current_thread_info()->flags
-	mov r18=ar.bsp			// save (kernel) ar.bsp (12 cyc)
-	mov ar.rsc=0x3			// set eager mode, pl 0, little-endian, loadrs=0
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	ssm psr.i
-	movl r2=ia64_ret_from_syscall
+	or r29=r8,r29				// A    construct cr.ipsr value to save
+	mov b6=r18				// I0   copy syscall entry-point to b6 (7 cyc)
+	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 // A compute base of memory stack
+
+	mov r18=ar.bsp				// M2   save (kernel) ar.bsp (12 cyc)
+	cmp.ne pKStk,pUStk=r0,r0		// A    set pKStk <- 0, pUStk <- 1
+	br.call.sptk.many b7=ia64_syscall_setup	// B
 	;;
-	mov rp=r2				// set the real return addr
-	and r3=_TIF_SYSCALL_TRACEAUDIT,r3
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	mov rp=r14				// I0   set the real return addr
+	and r3=_TIF_SYSCALL_TRACEAUDIT,r3	// A
 	;;
-	cmp.eq p8,p0=r3,r0
+	ssm psr.i				// M2   we're on kernel stacks now, reenable irqs
+	cmp.eq p8,p0=r3,r0			// A
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p10)	br.cond.spnt.many ia64_ret_from_syscall	// p10==true means out registers are more than 8
-(p8)	br.call.sptk.many b6=b6		// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+	nop.m 0
+(p8)	br.call.sptk.many b6=b6			// B    (ignore return address)
+	br.cond.spnt ia64_trace_syscall		// B
 END(fsys_bubble_down)
 
 	.rodata

arch/ia64/kernel/gate.S

@@ -72,38 +72,40 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 	 * bundle get executed.  The remaining code must be safe even if
 	 * they do not get executed.
 	 */
-	adds r17=-1024,r15
-	mov r10=0				// default to successful syscall execution
-	epc
+	adds r17=-1024,r15			// A
+	mov r10=0				// A    default to successful syscall execution
+	epc					// B	causes split-issue
 }
 	;;
-	rsm psr.be // note: on McKinley "rsm psr.be/srlz.d" is slightly faster than "rum psr.be"
-	LOAD_FSYSCALL_TABLE(r14)
-
-	mov r16=IA64_KR(CURRENT)		// 12 cycle read latency
-	tnat.nz p10,p9=r15
-	mov r19=NR_syscalls-1
+	rsm psr.be | psr.i			// M2 (5 cyc to srlz.d)
+	LOAD_FSYSCALL_TABLE(r14)		// X
 	;;
-	shladd r18=r17,3,r14
-
-	srlz.d
-	cmp.ne p8,p0=r0,r0			// p8 <- FALSE
-	/* Note: if r17 is a NaT, p6 will be set to zero.  */
-	cmp.geu p6,p7=r19,r17			// (syscall > 0 && syscall < 1024+NR_syscalls)?
-	;;
-(p6)	ld8 r18=[r18]
-	mov r21=ar.fpsr
-	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
-	;;
-(p6)	mov b7=r18
-(p6)	tbit.z p8,p0=r18,0
-(p8)	br.dptk.many b7
-
-(p6)	rsm psr.i
-	mov r27=ar.rsc
-	mov r26=ar.pfs
+	mov r16=IA64_KR(CURRENT)		// M2 (12 cyc)
+	shladd r18=r17,3,r14			// A
+	mov r19=NR_syscalls-1			// A
+	;;
+	lfetch [r18]				// M0|1
+	mov r29=psr				// M2 (12 cyc)
+	// If r17 is a NaT, p6 will be zero
+	cmp.geu p6,p7=r19,r17			// A    (sysnr > 0 && sysnr < 1024+NR_syscalls)?
+	;;
+	mov r21=ar.fpsr				// M2 (12 cyc)
+	tnat.nz p10,p9=r15			// I0
+	mov.i r26=ar.pfs			// I0 (would stall anyhow due to srlz.d...)
+	;;
+	srlz.d					// M0 (forces split-issue) ensure PSR.BE==0
+(p6)	ld8 r18=[r18]				// M0|1
+	nop.i 0
+	;;
+	nop.m 0
+(p6)	tbit.z.unc p8,p0=r18,0			// I0 (dual-issues with "mov b7=r18"!)
+	nop.i 0
 	;;
-	mov r29=psr				// read psr (12 cyc load latency)
+(p8)	ssm psr.i
+(p6)	mov b7=r18				// I0
+(p8)	br.dptk.many b7				// B
+
+	mov r27=ar.rsc				// M2 (12 cyc)
 /*
  * brl.cond doesn't work as intended because the linker would convert this branch
  * into a branch to a PLT.  Perhaps there will be a way to avoid this with some
@@ -111,6 +113,8 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
  * instead.
  */
 #ifdef CONFIG_ITANIUM
+(p6)	add r14=-8,r14				// r14 <- addr of fsys_bubble_down entry
+	;;
 (p6)	ld8 r14=[r14]				// r14 <- fsys_bubble_down
 	;;
 (p6)	mov b7=r14
@@ -118,7 +122,7 @@ GLOBAL_ENTRY(__kernel_syscall_via_epc)
 #else
 	BRL_COND_FSYS_BUBBLE_DOWN(p6)
 #endif
-
+	ssm psr.i
 	mov r10=-1
 (p10)	mov r8=EINVAL
 (p9)	mov r8=ENOSYS

arch/ia64/kernel/ia64_ksyms.c

@@ -58,9 +58,6 @@ EXPORT_SYMBOL(__strlen_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
 
-#include <asm/unistd.h>
-EXPORT_SYMBOL(__ia64_syscall);
-
 /* from arch/ia64/lib */
 extern void __divsi3(void);
 extern void __udivsi3(void);

arch/ia64/kernel/ivt.S

 /*
  * arch/ia64/kernel/ivt.S
  *
- * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co
  *	Stephane Eranian <eranian@hpl.hp.com>
  *	David Mosberger <davidm@hpl.hp.com>
  * Copyright (C) 2000, 2002-2003 Intel Co
@@ -692,82 +692,118 @@ ENTRY(break_fault)
 	 * to prevent leaking bits from kernel to user level.
 	 */
 	DBG_FAULT(11)
-	mov r16=IA64_KR(CURRENT)		// r16 = current task; 12 cycle read lat.
-	mov r17=cr.iim
-	mov r18=__IA64_BREAK_SYSCALL
-	mov r21=ar.fpsr
-	mov r29=cr.ipsr
-	mov r19=b6
-	mov r25=ar.unat
-	mov r27=ar.rsc
-	mov r26=ar.pfs
-	mov r28=cr.iip
-	mov r31=pr				// prepare to save predicates
-	mov r20=r1
-	;;
+	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
+	mov r29=cr.ipsr				// M2 (12 cyc)
+	mov r31=pr				// I0 (2 cyc)
+
+	mov r17=cr.iim				// M2 (2 cyc)
+	mov.m r27=ar.rsc			// M2 (12 cyc)
+	mov r18=__IA64_BREAK_SYSCALL		// A
+
+	mov.m ar.rsc=0				// M2
+	mov.m r21=ar.fpsr			// M2 (12 cyc)
+	mov r19=b6				// I0 (2 cyc)
+	;;
+	mov.m r23=ar.bspstore			// M2 (12 cyc)
+	mov.m r24=ar.rnat			// M2 (5 cyc)
+	mov.i r26=ar.pfs			// I0 (2 cyc)
+
+	invala					// M0|1
+	nop.m 0					// M
+	mov r20=r1				// A			save r1
+
+	nop.m 0
+	movl r30=sys_call_table			// X
+
+	mov r28=cr.iip				// M2 (2 cyc)
+	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
+(p7)	br.cond.spnt non_syscall		// B  no ->
+	//
+	// From this point on, we are definitely on the syscall-path
+	// and we can use (non-banked) scratch registers.
+	//
+///////////////////////////////////////////////////////////////////////
+	mov r1=r16				// A    move task-pointer to "addl"-addressable reg
+	mov r2=r16				// A    setup r2 for ia64_syscall_setup
+	add r9=TI_FLAGS+IA64_TASK_SIZE,r16	// A	r9 = &current_thread_info()->flags
+
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16
-	cmp.eq p0,p7=r18,r17			// is this a system call? (p7 <- false, if so)
-(p7)	br.cond.spnt non_syscall
+	adds r15=-1024,r15			// A    subtract 1024 from syscall number
+	mov r3=NR_syscalls - 1
 	;;
-	ld1 r17=[r16]				// load current->thread.on_ustack flag
-	st1 [r16]=r0				// clear current->thread.on_ustack flag
-	add r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16	// set r1 for MINSTATE_START_SAVE_MIN_VIRT
+	ld1.bias r17=[r16]			// M0|1 r17 = current->thread.on_ustack flag
+	ld4 r9=[r9]				// M0|1 r9 = current_thread_info()->flags
+	extr.u r8=r29,41,2			// I0   extract ei field from cr.ipsr
+
+	shladd r30=r15,3,r30			// A    r30 = sys_call_table + 8*(syscall-1024)
+	addl r22=IA64_RBS_OFFSET,r1		// A    compute base of RBS
+	cmp.leu p6,p7=r15,r3			// A    syscall number in range?
 	;;
-	invala
 
-	/* adjust return address so we skip over the break instruction: */
+	lfetch.fault.excl.nt1 [r22]		// M0|1 prefetch RBS
+(p6)	ld8 r30=[r30]				// M0|1 load address of syscall entry point
+	tnat.nz.or p7,p0=r15			// I0	is syscall nr a NaT?
 
-	extr.u r8=r29,41,2			// extract ei field from cr.ipsr
-	;;
-	cmp.eq p6,p7=2,r8			// isr.ei==2?
-	mov r2=r1				// setup r2 for ia64_syscall_setup
-	;;
-(p6)	mov r8=0				// clear ei to 0
-(p6)	adds r28=16,r28				// switch cr.iip to next bundle cr.ipsr.ei wrapped
-(p7)	adds r8=1,r8				// increment ei to next slot
-	;;
-	cmp.eq pKStk,pUStk=r0,r17		// are we in kernel mode already?
-	dep r29=r8,r29,41,2			// insert new ei into cr.ipsr
+	mov.m ar.bspstore=r22			// M2   switch to kernel RBS
+	cmp.eq p8,p9=2,r8			// A    isr.ei==2?
 	;;
 
-	// switch from user to kernel RBS:
-	MINSTATE_START_SAVE_MIN_VIRT
-	br.call.sptk.many b7=ia64_syscall_setup
-	;;
-	MINSTATE_END_SAVE_MIN_VIRT		// switch to bank 1
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	mov r3=NR_syscalls - 1
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	// p10==true means out registers are more than 8 or r15's Nat is true
-(p10)	br.cond.spnt.many ia64_ret_from_syscall
-	;;
-	movl r16=sys_call_table
+(p8)	mov r8=0				// A    clear ei to 0
+(p7)	movl r30=sys_ni_syscall			// X
 
-	adds r15=-1024,r15			// r15 contains the syscall number---subtract 1024
-	movl r2=ia64_ret_from_syscall
-	;;
-	shladd r20=r15,3,r16			// r20 = sys_call_table + 8*(syscall-1024)
-	cmp.leu p6,p7=r15,r3			// (syscall > 0 && syscall < 1024 + NR_syscalls) ?
-	mov rp=r2				// set the real return addr
+(p8)	adds r28=16,r28				// A    switch cr.iip to next bundle
+(p9)	adds r8=1,r8				// A    increment ei to next slot
+	nop.i 0
 	;;
-(p6)	ld8 r20=[r20]				// load address of syscall entry point
-(p7)	movl r20=sys_ni_syscall
 
-	add r2=TI_FLAGS+IA64_TASK_SIZE,r13
-	;;
-	ld4 r2=[r2]				// r2 = current_thread_info()->flags
-	;;
-	and r2=_TIF_SYSCALL_TRACEAUDIT,r2	// mask trace or audit
+	mov.m r25=ar.unat			// M2 (5 cyc)
+	dep r29=r8,r29,41,2			// I0   insert new ei into cr.ipsr
+	adds r15=1024,r15			// A    restore original syscall number
+	//
+	// If any of the above loads miss in L1D, we'll stall here until
+	// the data arrives.
+	//
+///////////////////////////////////////////////////////////////////////
+	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+	mov b6=r30				// I0   setup syscall handler branch reg early
+	cmp.eq pKStk,pUStk=r0,r17		// A    were we on kernel stacks already?
+
+	and r9=_TIF_SYSCALL_TRACEAUDIT,r9	// A    mask trace or audit
+	mov r18=ar.bsp				// M2 (12 cyc)
+(pKStk)	br.cond.spnt .break_fixup		// B	we're already in kernel-mode -- fix up RBS
+	;;
+.back_from_break_fixup:
+(pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1 // A    compute base of memory stack
+	cmp.eq p14,p0=r9,r0			// A    are syscalls being traced/audited?
+	br.call.sptk.many b7=ia64_syscall_setup	// B
+1:
+	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
+	nop 0
+	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
 	;;
-	cmp.eq p8,p0=r2,r0
-	mov b6=r20
+
+	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	movl r3=ia64_ret_from_syscall		// X
 	;;
-(p8)	br.call.sptk.many b6=b6			// ignore this return addr
-	br.cond.sptk ia64_trace_syscall
+
+	srlz.i					// M0   ensure interruption collection is on
+	mov rp=r3				// I0   set the real return addr
+(p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
+
+(p15)	ssm psr.i				// M2   restore psr.i
+(p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
+	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
+///////////////////////////////////////////////////////////////////////
+	// On entry, we optimistically assumed that we're coming from user-space.
+	// For the rare cases where a system-call is done from within the kernel,
+	// we fix things up at this point:
+.break_fixup:
+	add r1=-IA64_PT_REGS_SIZE,sp		// A    allocate space for pt_regs structure
+	mov ar.rnat=r24				// M2	restore kernel's AR.RNAT
+	;;
+	mov ar.bspstore=r23			// M2	restore kernel's AR.BSPSTORE
+	br.cond.sptk .back_from_break_fixup
 END(break_fault)
 
 	.org ia64_ivt+0x3000
@@ -842,8 +878,6 @@ END(interrupt)
 	 *	- r31: saved pr
 	 *	-  b0: original contents (to be saved)
 	 * On exit:
-	 *	- executing on bank 1 registers
-	 *	- psr.ic enabled, interrupts restored
 	 *	-  p10: TRUE if syscall is invoked with more than 8 out
 	 *		registers or r15's Nat is true
 	 *	-  r1: kernel's gp
@@ -851,8 +885,11 @@ END(interrupt)
 	 *	-  r8: -EINVAL if p10 is true
 	 *	- r12: points to kernel stack
 	 *	- r13: points to current task
+	 *	- r14: preserved (same as on entry)
+	 *	- p13: preserved
 	 *	- p15: TRUE if interrupts need to be re-enabled
 	 *	- ar.fpsr: set to kernel settings
+	 *	-  b6: preserved (same as on entry)
 	 */
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
@@ -920,10 +957,10 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p13)	mov in5=-1
 	;;
 	st8 [r16]=r21,PT(R8)-PT(AR_FPSR)	// save ar.fpsr
-	tnat.nz p14,p0=in6
+	tnat.nz p13,p0=in6
 	cmp.lt p10,p9=r11,r8	// frame size can't be more than local+8
 	;;
-	stf8 [r16]=f1		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+	mov r8=1
 (p9)	tnat.nz p10,p0=r15
 	adds r12=-16,r1		// switch to kernel memory stack (with 16 bytes of scratch)
 
@@ -934,9 +971,9 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 	mov r13=r2				// establish `current'
 	movl r1=__gp				// establish kernel global pointer
 	;;
-(p14)	mov in6=-1
+	st8 [r16]=r8		// ensure pt_regs.r8 != 0 (see handle_syscall_error)
+(p13)	mov in6=-1
 (p8)	mov in7=-1
-	nop.i 0
 
 	cmp.eq pSys,pNonSys=r0,r0		// set pSys=1, pNonSys=0
 	movl r17=FPSR_DEFAULT
@@ -1007,6 +1044,8 @@ END(dispatch_illegal_op_fault)
 	FAULT(17)
 
 ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
 	SAVE_MIN_WITH_COVER
 
 	// There is no particular reason for this code to be here, other than that
@@ -1204,6 +1243,25 @@ END(disabled_fp_reg)
 // 0x5600 Entry 26 (size 16 bundles) Nat Consumption (11,23,37,50)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
+
+	mov r16=cr.ipsr
+	mov r17=cr.isr
+	mov r31=pr				// save PR
+	;;
+	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
+	tbit.z p6,p0=r17,IA64_ISR_NA_BIT
+	;;
+	cmp.ne.or p6,p0=IA64_ISR_CODE_LFETCH,r18
+	dep r16=-1,r16,IA64_PSR_ED_BIT,1
+(p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
+	;;
+	mov cr.ipsr=r16		// set cr.ipsr.na
+	mov pr=r31,-1
+	;;
+	rfi
+
+1:	mov pr=r31,-1
+	;;
 	FAULT(26)
 END(nat_consumption)
 

arch/ia64/kernel/ptrace.c

@@ -725,12 +725,32 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 			break;
 	}
 
+	/*
+	 * Note: at the time of this call, the target task is blocked
+	 * in notify_resume_user() and by clearling PRED_LEAVE_SYSCALL
+	 * (aka, "pLvSys") we redirect execution from
+	 * .work_pending_syscall_end to .work_processed_kernel.
+	 */
 	unw_get_pr(&prev_info, &pr);
-	pr &= ~(1UL << PRED_SYSCALL);
+	pr &= ~((1UL << PRED_SYSCALL) | (1UL << PRED_LEAVE_SYSCALL));
 	pr |=  (1UL << PRED_NON_SYSCALL);
 	unw_set_pr(&prev_info, pr);
 
 	pt->cr_ifs = (1UL << 63) | cfm;
+	/*
+	 * Clear the memory that is NOT written on syscall-entry to
+	 * ensure we do not leak kernel-state to user when execution
+	 * resumes.
+	 */
+	pt->r2 = 0;
+	pt->r3 = 0;
+	pt->r14 = 0;
+	memset(&pt->r16, 0, 16*8);	/* clear r16-r31 */
+	memset(&pt->f6, 0, 6*16);	/* clear f6-f11 */
+	pt->b7 = 0;
+	pt->ar_ccv = 0;
+	pt->ar_csd = 0;
+	pt->ar_ssd = 0;
 }
 
 static int

arch/ia64/kernel/setup.c

@@ -72,6 +72,8 @@ DEFINE_PER_CPU(unsigned long, ia64_phys_stacked_size_p8);
 unsigned long ia64_cycles_per_usec;
 struct ia64_boot_param *ia64_boot_param;
 struct screen_info screen_info;
+unsigned long vga_console_iobase;
+unsigned long vga_console_membase;
 
 unsigned long ia64_max_cacheline_size;
 unsigned long ia64_iobase;	/* virtual address for I/O accesses */
@@ -273,23 +275,25 @@ io_port_init (void)
 static inline int __init
 early_console_setup (char *cmdline)
 {
+	int earlycons = 0;
+
 #ifdef CONFIG_SERIAL_SGI_L1_CONSOLE
 	{
 		extern int sn_serial_console_early_setup(void);
 		if (!sn_serial_console_early_setup())
-			return 0;
+			earlycons++;
 	}
 #endif
 #ifdef CONFIG_EFI_PCDP
 	if (!efi_setup_pcdp_console(cmdline))
-		return 0;
+		earlycons++;
 #endif
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	if (!early_serial_console_init(cmdline))
-		return 0;
+		earlycons++;
 #endif
 
-	return -1;
+	return (earlycons) ? 0 : -1;
 }
 
 static inline void

arch/ia64/kernel/smp.c

@@ -231,13 +231,16 @@ smp_flush_tlb_all (void)
 void
 smp_flush_tlb_mm (struct mm_struct *mm)
 {
+	preempt_disable();
 	/* this happens for the common case of a single-threaded fork():  */
 	if (likely(mm == current->active_mm && atomic_read(&mm->mm_users) == 1))
 	{
 		local_finish_flush_tlb_mm(mm);
+		preempt_enable();
 		return;
 	}
 
+	preempt_enable();
 	/*
 	 * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
 	 * have been running in the address space.  It's not clear that this is worth the

arch/ia64/sn/kernel/io_init.c

@@ -384,7 +384,7 @@ static int __init sn_pci_init(void)
 	extern void register_sn_procfs(void);
 #endif
 
-	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_SIMULATOR())
+	if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
 		return 0;
 
 	/*

arch/ia64/sn/kernel/iomv.c

@@ -9,12 +9,16 @@
 #include <linux/module.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/vga.h>
 #include <asm/sn/nodepda.h>
 #include <asm/sn/simulator.h>
 #include <asm/sn/pda.h>
 #include <asm/sn/sn_cpuid.h>
 #include <asm/sn/shub_mmr.h>
 
+#define IS_LEGACY_VGA_IOPORT(p) \
+	(((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
+
 /**
  * sn_io_addr - convert an in/out port to an i/o address
  * @port: port to convert
@@ -26,6 +30,8 @@
 void *sn_io_addr(unsigned long port)
 {
 	if (!IS_RUNNING_ON_SIMULATOR()) {
+		if (IS_LEGACY_VGA_IOPORT(port))
+			port += vga_console_iobase;
 		/* On sn2, legacy I/O ports don't point at anything */
 		if (port < (64 * 1024))
 			return NULL;

arch/ia64/sn/kernel/setup.c

@@ -36,6 +36,7 @@
 #include <asm/machvec.h>
 #include <asm/system.h>
 #include <asm/processor.h>
+#include <asm/vga.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/pda.h>
@@ -95,6 +96,7 @@ u8 sn_coherency_id;
 EXPORT_SYMBOL(sn_coherency_id);
 u8 sn_region_size;
 EXPORT_SYMBOL(sn_region_size);
+int sn_prom_type;	/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 
 short physical_node_map[MAX_PHYSNODE_ID];
 
@@ -273,14 +275,17 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_sn_plat_set_error_handling_features();
 
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
 	/*
-	 * If the generic code has enabled vga console support - lets
-	 * get rid of it again. This is a kludge for the fact that ACPI
-	 * currtently has no way of informing us if legacy VGA is available
-	 * or not.
+	 * If there was a primary vga adapter identified through the
+	 * EFI PCDP table, make it the preferred console.  Otherwise
+	 * zero out conswitchp.
 	 */
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	if (conswitchp == &vga_con) {
+
+	if (vga_console_membase) {
+		/* usable vga ... make tty0 the preferred default console */
+		add_preferred_console("tty", 0, NULL);
+	} else {
 		printk(KERN_DEBUG "SGI: Disabling VGA console\n");
 #ifdef CONFIG_DUMMY_CONSOLE
 		conswitchp = &dummy_con;
@@ -350,7 +355,7 @@ void __init sn_setup(char **cmdline_p)
 
 	ia64_mark_idle = &snidle;
 
-	/* 
+	/*
 	 * For the bootcpu, we do this here. All other cpus will make the
 	 * call as part of cpu_init in slave cpu initialization.
 	 */
@@ -397,7 +402,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 		nodepdaindr[cnode] =
 		    alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
-		memset(nodepdaindr[cnode]->phys_cpuid, -1, 
+		memset(nodepdaindr[cnode]->phys_cpuid, -1,
 		    sizeof(nodepdaindr[cnode]->phys_cpuid));
 	}
 
@@ -427,7 +432,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 	}
 
 	/*
-	 * Initialize the per node hubdev.  This includes IO Nodes and 
+	 * Initialize the per node hubdev.  This includes IO Nodes and
 	 * headless/memless nodes.
 	 */
 	for (cnode = 0; cnode < numionodes; cnode++) {
@@ -455,6 +460,14 @@ void __init sn_cpu_init(void)
 	int i;
 	static int wars_have_been_checked;
 
+	if (smp_processor_id() == 0 && IS_MEDUSA()) {
+		if (ia64_sn_is_fake_prom())
+			sn_prom_type = 2;
+		else
+			sn_prom_type = 1;
+		printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake");
+	}
+
 	memset(pda, 0, sizeof(pda));
 	if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
 				&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
@@ -520,7 +533,7 @@ void __init sn_cpu_init(void)
 	 */
 	{
 		u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
-		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, 
+		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
 			SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
 		u64 *pio;
 		pio = is_shub1() ? pio1 : pio2;
@@ -552,6 +565,10 @@ static void __init scan_for_ionodes(void)
 	int nasid = 0;
 	lboard_t *brd;
 
+	/* fakeprom does not support klgraph */
+	if (IS_RUNNING_ON_FAKE_PROM())
+		return;
+
 	/* Setup ionodes with memory */
 	for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
 		char *klgraph_header;
@@ -563,8 +580,6 @@ static void __init scan_for_ionodes(void)
 		cnodeid = -1;
 		klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
 		if (!klgraph_header) {
-			if (IS_RUNNING_ON_SIMULATOR())
-				continue;
 			BUG();	/* All nodes must have klconfig tables! */
 		}
 		cnodeid = nasid_to_cnodeid(nasid);
@@ -630,8 +645,8 @@ int
 nasid_slice_to_cpuid(int nasid, int slice)
 {
 	long cpu;
-	
-	for (cpu=0; cpu < NR_CPUS; cpu++) 
+
+	for (cpu=0; cpu < NR_CPUS; cpu++)
 		if (cpuid_to_nasid(cpu) == nasid &&
 					cpuid_to_slice(cpu) == slice)
 			return cpu;

arch/ia64/sn/kernel/sn2/ptc_deadlock.S

@@ -6,6 +6,7 @@
  * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
  */
 
+#include <asm/types.h>
 #include <asm/sn/shub_mmr.h>
 
 #define DEADLOCKBIT	SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT

arch/ia64/sn/kernel/tiocx.c

@@ -204,8 +204,8 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->dev.parent = NULL;
 	cx_dev->dev.bus = &tiocx_bus_type;
 	cx_dev->dev.release = tiocx_bus_release;
-	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d.0x%x",
-		 cx_dev->cx_id.nasid, cx_dev->cx_id.part_num);
+	snprintf(cx_dev->dev.bus_id, BUS_ID_SIZE, "%d",
+		 cx_dev->cx_id.nasid);
 	device_register(&cx_dev->dev);
 	get_device(&cx_dev->dev);
 
@@ -236,7 +236,6 @@ int cx_device_unregister(struct cx_dev *cx_dev)
  */
 static int cx_device_reload(struct cx_dev *cx_dev)
 {
-	device_remove_file(&cx_dev->dev, &dev_attr_cxdev_control);
 	cx_device_unregister(cx_dev);
 	return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num,
 				  cx_dev->cx_id.mfg_num, cx_dev->hubdev);
@@ -383,6 +382,7 @@ static int is_fpga_brick(int nasid)
 	switch (tiocx_btchar_get(nasid)) {
 	case L1_BRICKTYPE_SA:
 	case L1_BRICKTYPE_ATHENA:
+	case L1_BRICKTYPE_DAYTONA:
 		return 1;
 	}
 	return 0;
@@ -409,7 +409,7 @@ static int tiocx_reload(struct cx_dev *cx_dev)
 		uint64_t cx_id;
 
 		cx_id =
-		    *(volatile int32_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
+		    *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
 					  WIDGET_ID);
 		part_num = XWIDGET_PART_NUM(cx_id);
 		mfg_num = XWIDGET_MFG_NUM(cx_id);
@@ -458,6 +458,10 @@ static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *
 
 	switch (n) {
 	case 1:
+		tio_corelet_reset(cx_dev->cx_id.nasid, TIOCX_CORELET);
+		tiocx_reload(cx_dev);
+		break;
+	case 2:
 		tiocx_reload(cx_dev);
 		break;
 	case 3:
@@ -537,7 +541,7 @@ static void __exit tiocx_exit(void)
 	bus_unregister(&tiocx_bus_type);
 }
 
-module_init(tiocx_init);
+subsys_initcall(tiocx_init);
 module_exit(tiocx_exit);
 
 /************************************************************************

arch/ia64/sn/pci/tioca_provider.c

@@ -336,7 +336,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
 	if (!ct_addr)
 		return 0;
 
-	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff);
+	bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL);
 	node_upper = ct_addr >> 48;
 
 	if (node_upper > 64) {
@@ -464,7 +464,7 @@ tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size)
  * For mappings created using the direct modes (64 or 48) there are no
  * resources to release.
  */
-void
+static void
 tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 {
 	int i, entry;
@@ -514,7 +514,7 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
  * The mapping mode used is based on the devices dma_mask.  As a last resort
  * use the GART mapped mode.
  */
-uint64_t
+static uint64_t
 tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
 {
 	uint64_t mapaddr;
@@ -580,7 +580,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
  * On successful setup, returns the kernel version of tioca_common back to
  * the caller.
  */
-void *
+static void *
 tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft)
 {
 	struct tioca_common *tioca_common;

drivers/firmware/pcdp.c

@@ -16,6 +16,7 @@
 #include <linux/console.h>
 #include <linux/efi.h>
 #include <linux/serial.h>
+#include <asm/vga.h>
 #include "pcdp.h"
 
 static int __init
@@ -40,10 +41,27 @@ setup_serial_console(struct pcdp_uart *uart)
 }
 
 static int __init
-setup_vga_console(struct pcdp_vga *vga)
+setup_vga_console(struct pcdp_device *dev)
 {
 #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	if (efi_mem_type(0xA0000) == EFI_CONVENTIONAL_MEMORY) {
+	u8 *if_ptr;
+
+	if_ptr = ((u8 *)dev + sizeof(struct pcdp_device));
+	if (if_ptr[0] == PCDP_IF_PCI) {
+		struct pcdp_if_pci if_pci;
+
+		/* struct copy since ifptr might not be correctly aligned */
+
+		memcpy(&if_pci, if_ptr, sizeof(if_pci));
+
+		if (if_pci.trans & PCDP_PCI_TRANS_IOPORT)
+			vga_console_iobase = if_pci.ioport_tra;
+
+		if (if_pci.trans & PCDP_PCI_TRANS_MMIO)
+			vga_console_membase = if_pci.mmio_tra;
+	}
+
+	if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) {
 		printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n");
 		return -ENODEV;
 	}
@@ -95,7 +113,7 @@ efi_setup_pcdp_console(char *cmdline)
 	     dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) {
 		if (dev->flags & PCDP_PRIMARY_CONSOLE) {
 			if (dev->type == PCDP_CONSOLE_VGA) {
-				return setup_vga_console((struct pcdp_vga *) dev);
+				return setup_vga_console(dev);
 			}
 		}
 	}

drivers/firmware/pcdp.h

@@ -52,11 +52,34 @@ struct pcdp_uart {
 	u32				clock_rate;
 	u8				pci_prog_intfc;
 	u8				flags;
-};
+} __attribute__((packed));
+
+#define PCDP_IF_PCI	1
+
+/* pcdp_if_pci.trans */
+#define PCDP_PCI_TRANS_IOPORT	0x02
+#define PCDP_PCI_TRANS_MMIO	0x01
+
+struct pcdp_if_pci {
+	u8			interconnect;
+	u8			reserved;
+	u16			length;
+	u8			segment;
+	u8			bus;
+	u8			dev;
+	u8			fun;
+	u16			dev_id;
+	u16			vendor_id;
+	u32			acpi_interrupt;
+	u64			mmio_tra;
+	u64			ioport_tra;
+	u8			flags;
+	u8			trans;
+} __attribute__((packed));
 
 struct pcdp_vga {
 	u8			count;		/* address space descriptors */
-};
+} __attribute__((packed));
 
 /* pcdp_device.flags */
 #define PCDP_PRIMARY_CONSOLE	1
@@ -66,7 +89,9 @@ struct pcdp_device {
 	u8			flags;
 	u16			length;
 	u16			efi_index;
-};
+	/* next data is pcdp_if_pci or pcdp_if_acpi (not yet supported) */
+	/* next data is device specific type (currently only pcdp_vga) */
+} __attribute__((packed));
 
 struct pcdp {
 	u8			signature[4];
@@ -81,4 +106,4 @@ struct pcdp {
 	u32			num_uarts;
 	struct pcdp_uart	uart[0];	/* actual size is num_uarts */
 	/* remainder of table is pcdp_device structures */
-};
+} __attribute__((packed));

include/asm-ia64/mmu_context.h

@@ -132,6 +132,9 @@ reload_context (mm_context_t context)
 	ia64_srlz_i();			/* srlz.i implies srlz.d */
 }
 
+/*
+ * Must be called with preemption off
+ */
 static inline void
 activate_context (struct mm_struct *mm)
 {

include/asm-ia64/sn/addrs.h

@@ -216,6 +216,10 @@
 #define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
 
 
+#define TIO_IOSPACE_ADDR(n,x)					\
+	/* Move in the Chiplet ID for TIO Local Block MMR */	\
+	(REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))
+
 /*
  * The following macros produce the correct base virtual address for
  * the hub registers. The REMOTE_HUB_* macro produce
@@ -233,13 +237,16 @@
 #define REMOTE_HUB_ADDR(n,x)						\
 	((n & 1) ?							\
 	/* TIO: */							\
-	((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))			\
-	: /* SHUB: */							\
-	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))\
+	(is_shub2() ?							\
+	/* TIO on Shub2 */						\
+	(volatile u64 *)(TIO_IOSPACE_ADDR(n,x))				\
+	: /* TIO on shub1 */						\
+	(volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))				\
+									\
+	: /* SHUB1 and SHUB2 MMRs: */					\
+	(((x) & BWIN_TOP) ? ((volatile u64 *)(GLOBAL_MMR_ADDR(n,x)))	\
 	: ((volatile u64 *)(NODE_SWIN_BASE(n,1) + 0x800000 + (x)))))
 
-
-
 #define HUB_L(x)			(*((volatile typeof(*x) *)x))
 #define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
 

include/asm-ia64/sn/l1.h

@@ -33,5 +33,6 @@
 #define L1_BRICKTYPE_PA		0x6a            /* j */
 #define L1_BRICKTYPE_IA		0x6b            /* k */
 #define L1_BRICKTYPE_ATHENA	0x2b            /* + */
+#define L1_BRICKTYPE_DAYTONA	0x7a            /* z */
 
 #endif /* _ASM_IA64_SN_L1_H */

include/asm-ia64/sn/simulator.h

@@ -10,16 +10,17 @@
 
 #include <linux/config.h>
 
-#ifdef CONFIG_IA64_SGI_SN_SIM
-
 #define SNMAGIC 0xaeeeeeee8badbeefL
-#define IS_RUNNING_ON_SIMULATOR() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
-
-#define SIMULATOR_SLEEP()	asm("nop.i 0x8beef")
+#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
 
+#ifdef CONFIG_IA64_SGI_SN_SIM
+#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
+#define IS_RUNNING_ON_SIMULATOR() 	(sn_prom_type)
+#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type == 2)
+extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
 #else
-
 #define IS_RUNNING_ON_SIMULATOR()	(0)
+#define IS_RUNNING_ON_FAKE_PROM()	(0)
 #define SIMULATOR_SLEEP()
 
 #endif

include/asm-ia64/sn/sn2/sn_hwperf.h

@@ -223,4 +223,6 @@ struct sn_hwperf_ioctl_args {
 #define SN_HWPERF_OP_RECONFIGURE	253
 #define SN_HWPERF_OP_INVAL		254
 
+int sn_topology_open(struct inode *inode, struct file *file);
+int sn_topology_release(struct inode *inode, struct file *file);
 #endif				/* SN_HWPERF_H */

include/asm-ia64/sn/sn_sal.h

@@ -132,6 +132,8 @@
 #define SALRET_INVALID_ARG	(-2)
 #define SALRET_ERROR		(-3)
 
+#define SN_SAL_FAKE_PROM			   0x02009999
+
 
 /**
  * sn_sal_rev_major - get the major SGI SAL revision number
@@ -1105,4 +1107,12 @@ ia64_sn_bte_recovery(nasid_t nasid)
 	return (int) rv.status;
 }
 
+static inline int
+ia64_sn_is_fake_prom(void)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
+	return (rv.status == 0);
+}
+
 #endif /* _ASM_IA64_SN_SN_SAL_H */

include/asm-ia64/sn/tioca_provider.h

@@ -201,6 +201,7 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel)
 }
 
 extern uint32_t	tioca_gart_found;
+extern struct list_head tioca_list;
 extern int tioca_init_provider(void);
 extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
 #endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */

include/asm-ia64/vga.h

@@ -14,7 +14,10 @@
  * videoram directly without any black magic.
  */
 
-#define VGA_MAP_MEM(x)	((unsigned long) ioremap((x), 0))
+extern unsigned long vga_console_iobase;
+extern unsigned long vga_console_membase;
+
+#define VGA_MAP_MEM(x)	((unsigned long) ioremap(vga_console_membase + (x), 0))
 
 #define vga_readb(x)	(*(x))
 #define vga_writeb(x,y)	(*(y) = (x))