Commit 9c01c96c authored by Sylwester Nawrocki's avatar Sylwester Nawrocki Committed by Kukjin Kim

ARM: EXYNOS: Add support for S5K6AAFX image sensor on Universal C210 board

Add voltage regulator and platform data definitions for S5K6AAFX
image sensor driver.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent bcd7bd37
......@@ -46,6 +46,7 @@
#include <media/v4l2-mediabus.h>
#include <media/s5p_fimc.h>
#include <media/m5mols.h>
#include <media/s5k6aa.h>
#include "common.h"
......@@ -122,8 +123,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer =
static struct regulator_consumer_supply lp3974_buck2_consumer =
REGULATOR_SUPPLY("vddg3d", NULL);
static struct regulator_consumer_supply lp3974_buck3_consumer =
REGULATOR_SUPPLY("vdet", "s5p-sdo");
static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
REGULATOR_SUPPLY("vdet", "s5p-sdo"),
REGULATOR_SUPPLY("vdd_reg", "0-003c"),
};
static struct regulator_init_data lp3974_buck1_data = {
.constraints = {
......@@ -168,8 +171,8 @@ static struct regulator_init_data lp3974_buck3_data = {
.enabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_buck3_consumer,
.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
.consumer_supplies = lp3974_buck3_consumer,
};
static struct regulator_init_data lp3974_buck4_data = {
......@@ -302,6 +305,9 @@ static struct regulator_init_data lp3974_ldo8_data = {
.consumer_supplies = lp3974_ldo8_consumer,
};
static struct regulator_consumer_supply lp3974_ldo9_consumer =
REGULATOR_SUPPLY("vddio", "0-003c");
static struct regulator_init_data lp3974_ldo9_data = {
.constraints = {
.name = "VCC_2.8V",
......@@ -313,6 +319,8 @@ static struct regulator_init_data lp3974_ldo9_data = {
.enabled = 1,
},
},
.num_consumer_supplies = 1,
.consumer_supplies = &lp3974_ldo9_consumer,
};
static struct regulator_init_data lp3974_ldo10_data = {
......@@ -411,6 +419,7 @@ static struct regulator_init_data lp3974_ldo15_data = {
};
static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
REGULATOR_SUPPLY("vdda", "0-003c"),
REGULATOR_SUPPLY("a_sensor", "0-001f"),
};
......@@ -830,6 +839,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
static struct regulator_consumer_supply cam_vt_dio_supply =
REGULATOR_SUPPLY("vdd_core", "0-003c");
static struct regulator_init_data cam_vt_dio_reg_init_data = {
.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
.num_consumer_supplies = 1,
.consumer_supplies = &cam_vt_dio_supply,
};
static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
.supply_name = "CAM_VT_D_IO",
.microvolts = 2800000,
.gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
.enable_high = 1,
.init_data = &cam_vt_dio_reg_init_data,
};
static struct platform_device cam_vt_dio_fixed_reg_dev = {
.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
.dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
};
static struct regulator_consumer_supply cam_i_core_supply =
REGULATOR_SUPPLY("core", "0-001f");
......@@ -885,6 +916,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = {
#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
static int s5k6aa_set_power(int on)
{
gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
return 0;
}
static struct s5k6aa_platform_data s5k6aa_platdata = {
.mclk_frequency = 21600000UL,
.gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
.gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
.bus_type = V4L2_MBUS_PARALLEL,
.horiz_flip = 1,
.set_power = s5k6aa_set_power,
};
static struct i2c_board_info s5k6aa_board_info = {
I2C_BOARD_INFO("S5K6AA", 0x3C),
.platform_data = &s5k6aa_platdata,
};
static int m5mols_set_power(struct device *dev, int on)
{
......@@ -906,6 +959,14 @@ static struct i2c_board_info m5mols_board_info = {
static struct s5p_fimc_isp_info universal_camera_sensors[] = {
{
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
.bus_type = FIMC_ITU_601,
.board_info = &s5k6aa_board_info,
.i2c_bus_num = 0,
.clk_frequency = 24000000UL,
}, {
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
......@@ -927,6 +988,8 @@ static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
{ GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
{ GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
{ GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
{ GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
static void universal_camera_init(void)
......@@ -950,6 +1013,8 @@ static void universal_camera_init(void)
/* Free GPIOs controlled directly by the sensor drivers. */
gpio_free(GPIO_CAM_MEGA_nRST);
gpio_free(GPIO_CAM_8M_ISP_INT);
gpio_free(GPIO_CAM_VGA_NRST);
gpio_free(GPIO_CAM_VGA_NSTBY);
if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
pr_err("Camera port A setup failed\n");
......@@ -988,6 +1053,7 @@ static struct platform_device *universal_devices[] __initdata = {
&exynos4_device_pd[PD_MFC],
&exynos4_device_pd[PD_LCD0],
&exynos4_device_pd[PD_CAM],
&cam_vt_dio_fixed_reg_dev,
&cam_i_core_fixed_reg_dev,
&cam_s_if_fixed_reg_dev,
&s5p_device_fimc_md,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment