Commit 9c102981 authored by Alexandru Ardelean's avatar Alexandru Ardelean Committed by David S. Miller

net: phy: adin: add support for Analog Devices PHYs

This change adds support for Analog Devices Industrial Ethernet PHYs.
Particularly the PHYs this driver adds support for:
 * ADIN1200 - Robust, Industrial, Low Power 10/100 Ethernet PHY
 * ADIN1300 - Robust, Industrial, Low Latency 10/100/1000 Gigabit
   Ethernet PHY

The 2 chips are register compatible with one another. The main difference
being that ADIN1200 doesn't operate in gigabit mode.

The chips can be operated by the Generic PHY driver as well via the
standard IEEE PHY registers (0x0000 - 0x000F) which are supported by the
kernel as well. This assumes that configuration of the PHY has been done
completely in HW, according to spec.

Configuration can also be done via registers, which will be supported by
this driver.

Datasheets:
  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1300.pdf
  https://www.analog.com/media/en/technical-documentation/data-sheets/ADIN1200.pdfReviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 459c5fb4
...@@ -938,6 +938,13 @@ S: Supported ...@@ -938,6 +938,13 @@ S: Supported
F: drivers/mux/adgs1408.c F: drivers/mux/adgs1408.c
F: Documentation/devicetree/bindings/mux/adi,adgs1408.txt F: Documentation/devicetree/bindings/mux/adi,adgs1408.txt
ANALOG DEVICES INC ADIN DRIVER
M: Alexandru Ardelean <alexaundru.ardelean@analog.com>
L: netdev@vger.kernel.org
W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/net/phy/adin.c
ANALOG DEVICES INC ADIS DRIVER LIBRARY ANALOG DEVICES INC ADIS DRIVER LIBRARY
M: Alexandru Ardelean <alexandru.ardelean@analog.com> M: Alexandru Ardelean <alexandru.ardelean@analog.com>
S: Supported S: Supported
......
...@@ -257,6 +257,15 @@ config SFP ...@@ -257,6 +257,15 @@ config SFP
depends on HWMON || HWMON=n depends on HWMON || HWMON=n
select MDIO_I2C select MDIO_I2C
config ADIN_PHY
tristate "Analog Devices Industrial Ethernet PHYs"
help
Adds support for the Analog Devices Industrial Ethernet PHYs.
Currently supports the:
- ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
- ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
Ethernet PHY
config AMD_PHY config AMD_PHY
tristate "AMD PHYs" tristate "AMD PHYs"
---help--- ---help---
......
...@@ -47,6 +47,7 @@ obj-$(CONFIG_SFP) += sfp.o ...@@ -47,6 +47,7 @@ obj-$(CONFIG_SFP) += sfp.o
sfp-obj-$(CONFIG_SFP) += sfp-bus.o sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m) obj-y += $(sfp-obj-y) $(sfp-obj-m)
obj-$(CONFIG_ADIN_PHY) += adin.o
obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_AMD_PHY) += amd.o
aquantia-objs += aquantia_main.o aquantia-objs += aquantia_main.o
ifdef CONFIG_HWMON ifdef CONFIG_HWMON
......
// SPDX-License-Identifier: GPL-2.0+
/**
* Driver for Analog Devices Industrial Ethernet PHYs
*
* Copyright 2019 Analog Devices Inc.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/phy.h>
#define PHY_ID_ADIN1200 0x0283bc20
#define PHY_ID_ADIN1300 0x0283bc30
static int adin_config_init(struct phy_device *phydev)
{
return genphy_config_init(phydev);
}
static struct phy_driver adin_driver[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
.name = "ADIN1200",
.config_init = adin_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
},
{
PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
.name = "ADIN1300",
.config_init = adin_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
},
};
module_phy_driver(adin_driver);
static struct mdio_device_id __maybe_unused adin_tbl[] = {
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
{ }
};
MODULE_DEVICE_TABLE(mdio, adin_tbl);
MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment