Merge bk://gkernel.bkbits.net/net-drivers-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

MAINTAINERS

@@ -1110,7 +1110,7 @@ S:	Maintained
 
 IOC3 DRIVER
 P:	Ralf Baechle
-M:	ralf@oss.sgi.com
+M:	ralf@linux-mips.org
 L:	linux-mips@linux-mips.org
 S:	Maintained
 
@@ -1352,6 +1352,13 @@ P:	Zach Brown
 M:	zab@zabbo.net
 S:	Odd Fixes
 
+MARVELL MV64340 ETHERNET DRIVER
+P:	Manish Lachwani
+M:	Manish_Lachwani@pmc-sierra.com
+L:	linux-mips@linux-mips.org
+L:	netdev@oss.sgi.com
+S:	Supported
+
 MATROX FRAMEBUFFER DRIVER
 P:	Petr Vandrovec
 M:	vandrove@vc.cvut.cz
@@ -1372,7 +1379,7 @@ S:	Maintained
 
 MIPS
 P:	Ralf Baechle
-M:	ralf@gnu.org
+M:	ralf@linux-mips.org
 W:	http://oss.sgi.com/mips/mips-howto.html
 L:	linux-mips@linux-mips.org
 S:	Maintained

arch/i386/kernel/vm86.c

@@ -394,6 +394,7 @@ static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
 
 	if (VEFLAGS & VIF_MASK)
 		flags |= IF_MASK;
+	flags |= IOPL_MASK;
 	return flags | (VEFLAGS & current->thread.v86mask);
 }
 

arch/i386/mm/fault.c

@@ -188,11 +188,16 @@ static int __is_prefetch(struct pt_regs *regs, unsigned long addr)
 	return prefetch;
 }
 
-static inline int is_prefetch(struct pt_regs *regs, unsigned long addr)
+static inline int is_prefetch(struct pt_regs *regs, unsigned long addr,
+			      unsigned long error_code)
 {
 	if (unlikely(boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-		     boot_cpu_data.x86 >= 6))
+		     boot_cpu_data.x86 >= 6)) {
+		/* Catch an obscure case of prefetch inside an NX page. */
+		if (nx_enabled && (error_code & 16))
+			return 0;
 		return __is_prefetch(regs, addr);
+	}
 	return 0;
 } 
 
@@ -374,7 +379,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		 * Valid to do another page fault here because this one came 
 		 * from user space.
 		 */
-		if (is_prefetch(regs, address))
+		if (is_prefetch(regs, address, error_code))
 			return;
 
 		tsk->thread.cr2 = address;
@@ -415,7 +420,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	 * had been triggered by is_prefetch fixup_exception would have 
 	 * handled it.
 	 */
- 	if (is_prefetch(regs, address))
+ 	if (is_prefetch(regs, address, error_code))
  		return;
 
 /*
@@ -426,18 +431,11 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 	bust_spinlocks(1);
 
 #ifdef CONFIG_X86_PAE
-	{
-		pgd_t *pgd;
-		pmd_t *pmd;
-
+	if (error_code & 16) {
+		pte_t *pte = lookup_address(address);
 
-
-		pgd = init_mm.pgd + pgd_index(address);
-		if (pgd_present(*pgd)) {
-			pmd = pmd_offset(pgd, address);
-			if (pmd_val(*pmd) & _PAGE_NX)
-				printk(KERN_CRIT "kernel tried to access NX-protected page - exploit attempt? (uid: %d)\n", current->uid);
-		}
+		if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
+			printk(KERN_CRIT "kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n", current->uid);
 	}
 #endif
 	if (address < PAGE_SIZE)
@@ -492,7 +490,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 		goto no_context;
 
 	/* User space => ok to do another page fault */
-	if (is_prefetch(regs, address))
+	if (is_prefetch(regs, address, error_code))
 		return;
 
 	tsk->thread.cr2 = address;

arch/i386/mm/init.c

@@ -437,7 +437,7 @@ static int __init noexec_setup(char *str)
 __setup("noexec=", noexec_setup);
 
 #ifdef CONFIG_X86_PAE
-static int use_nx = 0;
+int nx_enabled = 0;
 
 static void __init set_nx(void)
 {
@@ -449,7 +449,7 @@ static void __init set_nx(void)
 			rdmsr(MSR_EFER, l, h);
 			l |= EFER_NX;
 			wrmsr(MSR_EFER, l, h);
-			use_nx = 1;
+			nx_enabled = 1;
 			__supported_pte_mask |= _PAGE_NX;
 		}
 	}
@@ -470,7 +470,7 @@ int __init set_kernel_exec(unsigned long vaddr, int enable)
 	pte = lookup_address(vaddr);
 	BUG_ON(!pte);
 
-	if (pte_val(*pte) & _PAGE_NX)
+	if (!pte_exec_kernel(*pte))
 		ret = 0;
 
 	if (enable)
@@ -495,7 +495,7 @@ void __init paging_init(void)
 {
 #ifdef CONFIG_X86_PAE
 	set_nx();
-	if (use_nx)
+	if (nx_enabled)
 		printk("NX (Execute Disable) protection: active\n");
 #endif
 

arch/ia64/sn/fakeprom/fw-emu.c

@@ -37,6 +37,7 @@
  */
 #include <linux/config.h>
 #include <linux/efi.h>
+#include <linux/kernel.h>
 #include <asm/pal.h>
 #include <asm/sal.h>
 #include <asm/sn/sn_sal.h>
@@ -78,7 +79,6 @@
 #define BOOT_PARAM_ADDR 0x40000
 #define MAX(i,j)		((i) > (j) ? (i) : (j))
 #define MIN(i,j)		((i) < (j) ? (i) : (j))
-#define ABS(i)			((i) > 0   ? (i) : -(i))
 #define ALIGN8(p)		(((long)(p) +7) & ~7)
 
 #define FPROM_BUG()		do {while (1);} while (0)
@@ -670,7 +670,7 @@ sys_fw_init (const char *args, int arglen, int bsp)
 	for (i=0; i<=max_nasid; i++)
 		for (j=0; j<=max_nasid; j++)
 			if (nasid_present(i) && nasid_present(j))
-				*(cp+PROXIMITY_DOMAIN(i)*acpi_slit->localities+PROXIMITY_DOMAIN(j)) = 10 + MIN(254, 5*ABS(i-j));
+				*(cp+PROXIMITY_DOMAIN(i)*acpi_slit->localities+PROXIMITY_DOMAIN(j)) = 10 + MIN(254, 5*abs(i-j));
 
 	cp = acpi_slit->entry + acpi_slit->localities*acpi_slit->localities;
 	acpi_checksum(&acpi_slit->header, cp - (char*)acpi_slit);

arch/mips/Kconfig

@@ -91,13 +91,6 @@ config IBM_WORKPAD
 	select IRQ_CPU
 	select ISA
 
-config NEC_EAGLE
-	bool "Support for NEC Eagle/Hawk board"
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	depends on MACH_VR41XX
-	select HW_HAS_PCI
-
 config TANBAC_TB0226
 	bool "Support for TANBAC TB0226 (Mbase)"
 	depends on MACH_VR41XX
@@ -311,6 +304,7 @@ config MOMENCO_OCELOT_G
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
+	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
@@ -321,6 +315,8 @@ config MOMENCO_OCELOT_C
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select IRQ_MV64340
+	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
@@ -332,7 +328,9 @@ config MOMENCO_JAGUAR_ATX
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select IRQ_CPU_RM7K
+	select IRQ_MV64340
 	select LIMITED_DMA
+	select PCI_MARVELL
 	select RM7000_CPU_SCACHE
 	help
 	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
@@ -885,7 +883,7 @@ config MIPS_NILE4
 
 config CPU_LITTLE_ENDIAN
 	bool "Generate little endian code"
-	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || HP_LASERJET || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || NEC_EAGLE || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
+	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || HP_LASERJET || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
 	default n if BAGET_MIPS || MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
 	help
 	  Some MIPS machines can be configured for either little or big endian
@@ -898,6 +896,9 @@ config IRQ_CPU
 config IRQ_CPU_RM7K
 	bool
 
+config IRQ_MV64340
+	bool
+
 config DDB5XXX_COMMON
 	bool
 	depends on DDB5074 || DDB5476 || DDB5477
@@ -918,16 +919,14 @@ config MIPS_GT64120
 	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
 	default y
 
-config MIPS_MV64340
-	bool
-	depends on MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_C
-	default y
-
 config MIPS_TX3927
 	bool
 	depends on TOSHIBA_JMR3927
 	default y
 
+config PCI_MARVELL
+	bool
+
 config ITE_BOARD_GEN
 	bool
 	depends on MIPS_IVR || MIPS_ITE8172

arch/mips/Makefile

@@ -463,12 +463,6 @@ load-$(CONFIG_NEC_OSPREY)	+= 0x80002000
 core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
 cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
 
-#
-# NEC Eagle/Hawk (VR4122/VR4131) board
-#
-core-$(CONFIG_NEC_EAGLE)	+= arch/mips/vr41xx/nec-eagle/
-load-$(CONFIG_NEC_EAGLE)	+= 0x80000000
-
 #
 # ZAO Networks Capcella (VR4131)
 #

arch/mips/configs/atlas_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -143,6 +144,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -169,7 +171,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
@@ -212,13 +214,13 @@ CONFIG_BLK_DEV_SD=y
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
@@ -321,6 +323,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -650,5 +653,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/bosporus_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/capcella_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_EAGLE is not set
 # CONFIG_TANBAC_TB0226 is not set
 # CONFIG_TANBAC_TB0229 is not set
 # CONFIG_VICTOR_MPC30X is not set
@@ -147,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -172,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -185,6 +186,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -283,6 +285,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -624,5 +627,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/cobalt_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -163,7 +165,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -176,6 +178,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -270,6 +273,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -600,5 +604,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/db1000_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -167,6 +168,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -293,6 +295,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -634,6 +637,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -688,6 +692,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/db1100_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -165,6 +166,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -291,6 +293,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -629,6 +632,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -683,6 +687,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/db1500_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -167,6 +168,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -259,6 +261,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECS=m
@@ -372,6 +375,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -706,6 +710,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -760,6 +765,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/ddb5476_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -139,6 +140,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -166,7 +168,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -179,6 +181,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -282,6 +285,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -485,6 +489,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
+# CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
@@ -640,5 +645,6 @@ CONFIG_CMDLINE="ip=any"
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/ddb5477_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -138,6 +139,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -163,7 +165,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -251,6 +253,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -306,6 +309,7 @@ CONFIG_PCNET32=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_LAN_SAA9730 is not set
 
 #
@@ -599,5 +603,6 @@ CONFIG_CMDLINE="ip=any"
 #
 # Library routines
 #
+CONFIG_CRC16=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/decstation_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -277,6 +279,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -554,7 +557,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 CONFIG_ULTRIX_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
@@ -585,5 +587,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m

arch/mips/configs/e55_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 CONFIG_CASIO_E55=y
 # CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_EAGLE is not set
 # CONFIG_TANBAC_TB0226 is not set
 # CONFIG_TANBAC_TB0229 is not set
 # CONFIG_VICTOR_MPC30X is not set
@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -277,6 +279,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -603,5 +606,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/ev64120_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -146,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -171,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -258,6 +260,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -592,5 +595,6 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/d
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/ev96100_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -146,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -252,6 +254,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -549,5 +552,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/ip22_defconfig

@@ -29,6 +29,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -148,6 +149,7 @@ CONFIG_BINFMT_IRIX=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -362,6 +364,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
 CONFIG_IP_NF_COMPAT_IPFWADM=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
 
 #
 # IPv6: Netfilter Configuration
@@ -438,8 +442,11 @@ CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
 #
@@ -696,6 +703,8 @@ CONFIG_UDF_FS=m
 CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -767,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
@@ -801,6 +809,7 @@ CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_CODEPAGE_1250=m
 CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -855,6 +864,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/ip27_defconfig

@@ -27,6 +27,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -153,6 +154,7 @@ CONFIG_BINFMT_ELF32=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,7 +180,7 @@ CONFIG_BINFMT_ELF32=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 
 #
@@ -218,12 +220,12 @@ CONFIG_SCSI_SPI_ATTRS=y
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
@@ -338,6 +340,7 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_DELAY=y
+# CONFIG_NET_SCH_INGRESS is not set
 CONFIG_NET_QOS=y
 CONFIG_NET_ESTIMATOR=y
 CONFIG_NET_CLS=y
@@ -346,8 +349,11 @@ CONFIG_NET_CLS_ROUTE4=y
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=y
 CONFIG_NET_CLS_U32=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=y
 CONFIG_NET_CLS_RSVP6=y
+# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
 #
@@ -657,7 +663,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
@@ -707,6 +712,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/ip32_defconfig

@@ -20,6 +20,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -27,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -141,6 +143,7 @@ CONFIG_BINFMT_ELF32=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -167,7 +170,7 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 
 #
@@ -208,6 +211,7 @@ CONFIG_SCSI_LOGGING=y
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 CONFIG_SCSI_AIC7XXX=y
@@ -219,7 +223,6 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
@@ -321,6 +324,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -632,7 +636,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MAC_PARTITION is not set
 # CONFIG_MSDOS_PARTITION is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
@@ -663,5 +666,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/it8172_defconfig

@@ -21,6 +21,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -28,6 +29,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -141,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -231,6 +234,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -326,6 +330,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -650,5 +655,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/ivr_defconfig

@@ -21,6 +21,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -28,6 +29,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -141,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -166,7 +169,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -179,6 +182,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -276,6 +280,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -604,5 +609,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/jaguar-atx_defconfig

@@ -28,6 +28,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -39,7 +40,10 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Loadable module support
 #
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_KMOD=y
 
 #
 # Machine selection
@@ -73,7 +77,8 @@ CONFIG_LIMITED_DMA=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
-CONFIG_MIPS_MV64340=y
+CONFIG_IRQ_MV64340=y
+CONFIG_PCI_MARVELL=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -140,6 +145,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -164,7 +170,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -234,6 +240,7 @@ CONFIG_IP_PNP_BOOTP=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -286,6 +293,7 @@ CONFIG_EEPRO100=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -538,5 +546,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/jmr3927_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -162,7 +164,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -250,6 +252,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -460,6 +463,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Graphics support
 #
+# CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
@@ -612,5 +616,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/lasat200_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -148,6 +149,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -229,7 +231,7 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -242,6 +244,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECD is not set
@@ -365,6 +368,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -698,5 +702,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m

arch/mips/configs/malta_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -150,6 +151,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -175,7 +177,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
@@ -264,6 +266,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -319,6 +322,7 @@ CONFIG_PCNET32=y
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_LAN_SAA9730 is not set
 
 #
@@ -613,5 +617,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m

arch/mips/configs/mirage_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/mpc30x_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_EAGLE is not set
 # CONFIG_TANBAC_TB0226 is not set
 # CONFIG_TANBAC_TB0229 is not set
 CONFIG_VICTOR_MPC30X=y
@@ -147,6 +147,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -172,7 +173,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -261,6 +262,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +609,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/mtx1_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/ocelot_c_defconfig

@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -74,7 +75,8 @@ CONFIG_HAVE_DEC_LOCK=y
 CONFIG_DMA_NONCOHERENT=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_IRQ_CPU=y
-CONFIG_MIPS_MV64340=y
+CONFIG_IRQ_MV64340=y
+CONFIG_PCI_MARVELL=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_FB is not set
@@ -139,6 +141,7 @@ CONFIG_BINFMT_ELF32=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -164,7 +167,7 @@ CONFIG_BINFMT_ELF32=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 
 #
@@ -250,6 +253,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -580,5 +584,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/ocelot_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -144,6 +145,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -250,6 +252,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -548,5 +551,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/ocelot_g_defconfig

@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -75,6 +76,7 @@ CONFIG_DMA_NONCOHERENT=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_CPU_RM7K=y
+CONFIG_PCI_MARVELL=y
 CONFIG_SWAP_IO_SPACE=y
 # CONFIG_SYSCLK_75 is not set
 # CONFIG_SYSCLK_83 is not set
@@ -142,6 +144,7 @@ CONFIG_BINFMT_ELF32=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -167,7 +170,7 @@ CONFIG_BINFMT_ELF32=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 
 #
@@ -253,6 +256,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -583,5 +587,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/osprey_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -135,6 +136,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -242,6 +244,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -540,5 +543,6 @@ CONFIG_CMDLINE="ip=bootp ether=46,0x03fe0300,eth0"
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m

arch/mips/configs/pb1000_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/pb1100_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/pb1500_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -150,6 +151,7 @@ CONFIG_MMU=y
 CONFIG_PCMCIA=m
 # CONFIG_PCMCIA_DEBUG is not set
 # CONFIG_YENTA is not set
+CONFIG_PD6729=m
 # CONFIG_I82092 is not set
 # CONFIG_TCIC is not set
 # CONFIG_PCMCIA_AU1X00 is not set
@@ -173,6 +175,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -200,7 +203,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -213,6 +216,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
@@ -357,6 +361,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -721,6 +726,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -775,6 +781,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/pb1550_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -149,6 +150,7 @@ CONFIG_MMU=y
 CONFIG_PCMCIA=m
 # CONFIG_PCMCIA_DEBUG is not set
 # CONFIG_YENTA is not set
+CONFIG_PD6729=m
 # CONFIG_I82092 is not set
 # CONFIG_TCIC is not set
 CONFIG_PCMCIA_AU1X00=m
@@ -172,6 +174,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -199,7 +202,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -212,6 +215,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
@@ -356,6 +360,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -720,6 +725,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -774,6 +780,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/rm200_defconfig

@@ -21,6 +21,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -29,6 +30,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -152,6 +154,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -218,7 +221,7 @@ CONFIG_PARIDE_ON26=m
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_LBD is not set
@@ -261,6 +264,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # SCSI low-level drivers
 #
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
@@ -270,7 +274,6 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_MEGARAID is not set
 # CONFIG_SCSI_SATA is not set
@@ -335,6 +338,9 @@ CONFIG_MD_RAID5=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
 
 #
 # Fusion MPT device support
@@ -453,6 +459,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
 CONFIG_IP_NF_COMPAT_IPFWADM=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
 
 #
 # IPv6: Netfilter Configuration
@@ -554,8 +562,11 @@ CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
 #
@@ -655,6 +666,7 @@ CONFIG_EEPRO100=m
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_LAN_SAA9730 is not set
 # CONFIG_NET_POCKET is not set
 
@@ -880,6 +892,7 @@ CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_RW_DETECT is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_DPCM=y
@@ -1089,6 +1102,8 @@ CONFIG_UDF_FS=m
 CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_NTFS_FS=m
 # CONFIG_NTFS_DEBUG is not set
 # CONFIG_NTFS_RW is not set
@@ -1148,6 +1163,7 @@ CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_POSIX is not set
 CONFIG_NCP_FS=m
 CONFIG_NCPFS_PACKET_SIGNING=y
 CONFIG_NCPFS_IOCTL_LOCKING=y
@@ -1177,7 +1193,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
@@ -1211,6 +1226,7 @@ CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_CODEPAGE_1250=m
 CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -1265,6 +1281,7 @@ CONFIG_CRYPTO_TEST=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m

arch/mips/configs/sb1250-swarm_defconfig

@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -179,6 +180,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -204,7 +206,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=9220
 CONFIG_BLK_DEV_INITRD=y
@@ -219,6 +221,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
@@ -317,6 +320,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -649,6 +653,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/sead_defconfig

@@ -27,6 +27,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -139,6 +140,7 @@ CONFIG_EMBEDDED_RAMDISK_IMAGE="ramdisk.gz"
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -428,5 +430,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/tb0226_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_EAGLE is not set
 CONFIG_TANBAC_TB0226=y
 # CONFIG_TANBAC_TB0229 is not set
 # CONFIG_VICTOR_MPC30X is not set
@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECD is not set
@@ -310,6 +312,7 @@ CONFIG_SYN_COOKIES=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -553,6 +556,8 @@ CONFIG_ZISOFS_FS=y
 CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -644,6 +649,7 @@ CONFIG_NLS_CODEPAGE_932=m
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -679,6 +685,7 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/tb0229_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 # CONFIG_CASIO_E55 is not set
 # CONFIG_IBM_WORKPAD is not set
-# CONFIG_NEC_EAGLE is not set
 # CONFIG_TANBAC_TB0226 is not set
 CONFIG_TANBAC_TB0229=y
 # CONFIG_VICTOR_MPC30X is not set
@@ -148,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -174,7 +175,7 @@ CONFIG_TRAD_SIGNALS=y
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
@@ -271,6 +272,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -544,6 +546,8 @@ CONFIG_ZISOFS_FS=y
 CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -635,6 +639,7 @@ CONFIG_NLS_CODEPAGE_932=m
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -670,6 +675,7 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/workpad_defconfig

@@ -28,6 +28,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -54,7 +55,6 @@ CONFIG_KMOD=y
 CONFIG_MACH_VR41XX=y
 # CONFIG_CASIO_E55 is not set
 CONFIG_IBM_WORKPAD=y
-# CONFIG_NEC_EAGLE is not set
 # CONFIG_TANBAC_TB0226 is not set
 # CONFIG_TANBAC_TB0229 is not set
 # CONFIG_VICTOR_MPC30X is not set
@@ -143,6 +143,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -178,6 +179,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
@@ -277,6 +279,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,5 +610,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/configs/xxs1500_defconfig

@@ -28,6 +28,7 @@ CONFIG_HOTPLUG=y
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -147,6 +148,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
@@ -273,6 +275,7 @@ CONFIG_XFRM=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -607,6 +610,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -661,6 +665,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 #
 # Library routines
 #
+CONFIG_CRC16=m
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/mips/configs/yosemite_defconfig

@@ -28,6 +28,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -137,6 +138,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -161,7 +163,7 @@ CONFIG_TRAD_SIGNALS=y
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -232,6 +234,7 @@ CONFIG_IP_PNP_BOOTP=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -517,5 +520,6 @@ CONFIG_CMDLINE=""
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set

arch/mips/defconfig

@@ -29,6 +29,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -148,6 +149,7 @@ CONFIG_BINFMT_IRIX=y
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 
 #
 # Memory Technology Devices (MTD)
@@ -362,6 +364,8 @@ CONFIG_IP_NF_COMPAT_IPCHAINS=m
 CONFIG_IP_NF_COMPAT_IPFWADM=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
 
 #
 # IPv6: Netfilter Configuration
@@ -438,8 +442,11 @@ CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_ROUTE=y
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_ACT is not set
 CONFIG_NET_CLS_POLICE=y
 
 #
@@ -696,6 +703,8 @@ CONFIG_UDF_FS=m
 CONFIG_FAT_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -767,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SOLARIS_X86_PARTITION is not set
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 CONFIG_SGI_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
@@ -801,6 +809,7 @@ CONFIG_NLS_CODEPAGE_874=m
 CONFIG_NLS_ISO8859_8=m
 CONFIG_NLS_CODEPAGE_1250=m
 CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_2=m
 CONFIG_NLS_ISO8859_3=m
@@ -855,6 +864,7 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
+CONFIG_CRC16=m
 # CONFIG_CRC32 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y

arch/mips/kernel/Makefile

@@ -38,7 +38,7 @@ obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
-obj-$(CONFIG_MIPS_MV64340)	+= irq-mv6434x.o
+obj-$(CONFIG_IRQ_MV64340)	+= irq-mv6434x.o
 
 obj-$(CONFIG_MIPS32)		+= scall32-o32.o
 obj-$(CONFIG_MIPS64)		+= scall64-64.o

arch/mips/kernel/irq-mv6434x.c

@@ -44,7 +44,7 @@ static inline void mask_mv64340_irq(unsigned int irq)
 		MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
 	} else {
 		value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-		value &= ~(1 << (irq - (irq_base - 32)));
+		value &= ~(1 << (irq - irq_base - 32));
 		MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
 	}
 }
@@ -60,7 +60,7 @@ static inline void unmask_mv64340_irq(unsigned int irq)
 		MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
 	} else {
 		value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-		value |= 1 << (irq - (irq_base - 32));
+		value |= 1 << (irq - irq_base - 32);
 		MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
 	}
 }

arch/mips/kernel/traps.c

@@ -9,7 +9,7 @@
  * Copyright (C) 1999 Silicon Graphics, Inc.
  * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000, 01 MIPS Technologies, Inc.
- * Copyright (C) 2002, 2003  Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2004  Maciej W. Rozycki
  */
 #include <linux/config.h>
 #include <linux/init.h>
@@ -23,6 +23,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
+#include <asm/break.h>
 #include <asm/cpu.h>
 #include <asm/fpu.h>
 #include <asm/module.h>
@@ -541,9 +542,12 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	/*
 	 * There is the ancient bug in the MIPS assemblers that the break
 	 * code starts left to bit 16 instead to bit 6 in the opcode.
-	 * Gas is bug-compatible ...
+	 * Gas is bug-compatible, but not always, grrr...
+	 * We handle both cases with a simple heuristics.  --macro
 	 */
-	bcode = ((opcode >> 16) & ((1 << 20) - 1));
+	bcode = ((opcode >> 6) & ((1 << 20) - 1));
+	if (bcode < (1 << 10))
+		bcode <<= 10;
 
 	/*
 	 * (A short test says that IRIX 5.3 sends SIGTRAP for all break
@@ -552,9 +556,9 @@ asmlinkage void do_bp(struct pt_regs *regs)
 	 * But should we continue the brokenness???  --macro
 	 */
 	switch (bcode) {
-	case 6:
-	case 7:
-		if (bcode == 7)
+	case BRK_OVERFLOW << 10:
+	case BRK_DIVZERO << 10:
+		if (bcode == (BRK_DIVZERO << 10))
 			info.si_code = FPE_INTDIV;
 		else
 			info.si_code = FPE_INTOVF;
@@ -580,7 +584,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 
 	/* Immediate versions don't provide a code.  */
 	if (!(opcode & OPCODE))
-		tcode = ((opcode >> 6) & ((1 << 20) - 1));
+		tcode = ((opcode >> 6) & ((1 << 10) - 1));
 
 	/*
 	 * (A short test says that IRIX 5.3 sends SIGTRAP for all trap
@@ -589,9 +593,9 @@ asmlinkage void do_tr(struct pt_regs *regs)
 	 * But should we continue the brokenness???  --macro
 	 */
 	switch (tcode) {
-	case 6:
-	case 7:
-		if (tcode == 7)
+	case BRK_OVERFLOW:
+	case BRK_DIVZERO:
+		if (tcode == BRK_DIVZERO)
 			info.si_code = FPE_INTDIV;
 		else
 			info.si_code = FPE_INTOVF;

arch/mips/mm/sc-rm7k.c

@@ -147,55 +147,47 @@ static void rm7k_sc_disable(void)
 	clear_c0_config(1<<3);				/* CONF_SE */
 }
 
-static inline int __init rm7k_sc_probe(void)
+struct bcache_ops rm7k_sc_ops = {
+	.bc_enable = rm7k_sc_enable,
+	.bc_disable = rm7k_sc_disable,
+	.bc_wback_inv = rm7k_sc_wback_inv,
+	.bc_inv = rm7k_sc_inv
+};
+
+void __init rm7k_sc_init(void)
 {
 	unsigned int config = read_c0_config();
 
-	if ((config >> 31) & 1)
-		return 0;
+	if ((config >> 31) & 1)		/* Bit 31 set -> no S-Cache */
+		return;
 
 	printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
 	       (scache_size >> 10), sc_lsize);
 
-	if ((config >> 3) & 1)                          /* CONF_SE */
-		return 1;
+	if (!((config >> 3) & 1))	/* CONF_SE */
+		rm7k_sc_enable();
 
 	/*
 	 * While we're at it let's deal with the tertiary cache.
 	 */
-	if ((config >> 17) & 1)
-		return 1;
-
-	/*
-	 * We can't enable the L3 cache yet. There may be board-specific
-	 * magic necessary to turn it on, and blindly asking the CPU to
-	 * start using it would may give cache errors.
-	 *
-	 * Also, board-specific knowledge may allow us to use the
-	 * CACHE Flash_Invalidate_T instruction if the tag RAM supports
-	 * it, and may specify the size of the L3 cache so we don't have
-	 * to probe it.
-	 */
-	printk(KERN_INFO "Tertiary cache present, %s enabled\n",
-	       config&(1<<12) ? "already" : "not (yet)");
-
-	if ((config >> 12) & 1)
-		rm7k_tcache_enabled = 1;
-
-	return 1;
-}
-
-struct bcache_ops rm7k_sc_ops = {
-	.bc_enable = rm7k_sc_enable,
-	.bc_disable = rm7k_sc_disable,
-	.bc_wback_inv = rm7k_sc_wback_inv,
-	.bc_inv = rm7k_sc_inv
-};
-
-void __init rm7k_sc_init(void)
-{
-	if (rm7k_sc_probe()) {
-		rm7k_sc_enable();
-		bcops = &rm7k_sc_ops;
+	if (!((config >> 17) & 1)) {
+
+		/*
+		 * We can't enable the L3 cache yet. There may be board-specific
+		 * magic necessary to turn it on, and blindly asking the CPU to
+		 * start using it would may give cache errors.
+		 *
+		 * Also, board-specific knowledge may allow us to use the
+		 * CACHE Flash_Invalidate_T instruction if the tag RAM supports
+		 * it, and may specify the size of the L3 cache so we don't have
+		 * to probe it.
+		 */
+		printk(KERN_INFO "Tertiary cache present, %s enabled\n",
+		       config&(1<<12) ? "already" : "not (yet)");
+
+		if ((config >> 12) & 1)
+			rm7k_tcache_enabled = 1;
 	}
+
+	bcops = &rm7k_sc_ops;
 }

arch/mips/momentum/jaguar_atx/prom.c

@@ -33,7 +33,6 @@ extern void ja_setup_console(void);
 
 struct callvectors *debug_vectors;
 
-extern unsigned long mv64340_base;
 extern unsigned long cpu_clock;
 
 const char *get_system_type(void)
@@ -185,13 +184,13 @@ void __init prom_init(void)
 			break;
 
 		if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-			mv64340_base = simple_strtol(ptr + strlen("gtbase="),
+			marvell_base = simple_strtol(ptr + strlen("gtbase="),
 							NULL, 16);
 
-			if ((mv64340_base & 0xffffffff00000000) == 0)
-				mv64340_base |= 0xffffffff00000000;
+			if ((marvell_base & 0xffffffff00000000) == 0)
+				marvell_base |= 0xffffffff00000000;
 
-			printk("mv64340_base set to 0x%016lx\n", mv64340_base);
+			printk("marvell_base set to 0x%016lx\n", marvell_base);
 		}
 		if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
 			cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
@@ -218,7 +217,7 @@ void __init prom_init(void)
 
 	while (*env) {
 		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-			mv64340_base = simple_strtol(*env + strlen("gtbase="),
+			marvell_base = simple_strtol(*env + strlen("gtbase="),
 							NULL, 16);
 		}
 		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {

arch/mips/momentum/jaguar_atx/setup.c

@@ -46,6 +46,7 @@
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/swap.h>
 #include <linux/ioport.h>
@@ -119,19 +120,21 @@ static __init void wire_stupidity_into_tlb(void)
 //	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
 //	                0xfe000000UL, PM_16M);
 
-	mv64340_base = 0xf4000000;
+	marvell_base = 0xf4000000;
 	//mv64340_sram_base = 0xfe000000;	/* Currently unused */
 #endif
 }
 
-unsigned long mv64340_base	= 0xf4000000L;
+unsigned long marvell_base	= 0xf4000000L;
 unsigned long ja_fpga_base	= JAGUAR_ATX_CS0_ADDR;
 unsigned long uart_base		= 0xfd000000L;
 static unsigned char *rtc_base	= (unsigned char*) 0xfc800000L;
 
+EXPORT_SYMBOL(marvell_base);
+
 static __init int per_cpu_mappings(void)
 {
-	mv64340_base	= (unsigned long) ioremap(0xf4000000, 0x10000);
+	marvell_base	= (unsigned long) ioremap(0xf4000000, 0x10000);
 	ja_fpga_base	= (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR,  0x1000);
 	uart_base	= (unsigned long) ioremap(0xfd000000UL, 0x1000);
 	rtc_base	= ioremap(0xfc000000UL, 0x8000);
@@ -233,12 +236,14 @@ static struct resource mv_pci_mem0_resource = {
 	.flags	= IORESOURCE_MEM
 };
 
-extern struct pci_ops mv64340_bus0_pci_ops;
-
-static struct pci_controller mv_bus0_controller = {
-	.pci_ops	= &mv64340_bus0_pci_ops,
-	.mem_resource	= &mv_pci_mem0_resource,
-	.io_resource	= &mv_pci_io_mem0_resource,
+static struct mv_pci_controller mv_bus0_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &mv_pci_mem0_resource,
+		.io_resource	= &mv_pci_io_mem0_resource,
+	},
+	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
 };
 
 static uint32_t mv_io_base, mv_io_size;
@@ -253,16 +258,16 @@ static void ja_pci0_init(void)
 	mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
 	mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
 
-	mv_pci_io_mem0_resource.start	= 0;
-	mv_pci_io_mem0_resource.end	= io_size - 1;
-	mv_pci_mem0_resource.start	= mem0_base;
-	mv_pci_mem0_resource.end	= mem0_base + mem0_size - 1;
-	mv_bus0_controller.mem_offset	= mem0_base;
-	mv_bus0_controller.io_offset	= 0;
+	mv_pci_io_mem0_resource.start		= 0;
+	mv_pci_io_mem0_resource.end		= io_size - 1;
+	mv_pci_mem0_resource.start		= mem0_base;
+	mv_pci_mem0_resource.end		= mem0_base + mem0_size - 1;
+	mv_bus0_controller.pcic.mem_offset	= mem0_base;
+	mv_bus0_controller.pcic.io_offset	= 0;
 
 	ioport_resource.end		= io_size - 1;
 
-	register_pci_controller(&mv_bus0_controller);
+	register_pci_controller(&mv_bus0_controller.pcic);
 
 	mv_io_base = io_base;
 	mv_io_size = io_size;
@@ -278,12 +283,14 @@ static struct resource mv_pci_mem1_resource = {
 	.flags	= IORESOURCE_MEM
 };
 
-extern struct pci_ops mv64340_bus1_pci_ops;
-
-static struct pci_controller mv_bus1_controller = {
-	.pci_ops	= &mv64340_bus1_pci_ops,
-	.mem_resource	= &mv_pci_mem1_resource,
-	.io_resource	= &mv_pci_io_mem1_resource,
+static struct mv_pci_controller mv_bus1_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &mv_pci_mem1_resource,
+		.io_resource	= &mv_pci_io_mem1_resource,
+	},
+	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
 };
 
 static __init void ja_pci1_init(void)
@@ -301,16 +308,16 @@ static __init void ja_pci1_init(void)
 	 * the first.  A gap is no problem but would waste address space for
 	 * remapping the port space.
 	 */
-	mv_pci_io_mem1_resource.start	= mv_io_size;
-	mv_pci_io_mem1_resource.end	= mv_io_size + io_size - 1;
-	mv_pci_mem1_resource.start	= mem0_base;
-	mv_pci_mem1_resource.end	= mem0_base + mem0_size - 1;
-	mv_bus1_controller.mem_offset	= mem0_base;
-	mv_bus1_controller.io_offset	= 0;
+	mv_pci_io_mem1_resource.start		= mv_io_size;
+	mv_pci_io_mem1_resource.end		= mv_io_size + io_size - 1;
+	mv_pci_mem1_resource.start		= mem0_base;
+	mv_pci_mem1_resource.end		= mem0_base + mem0_size - 1;
+	mv_bus1_controller.pcic.mem_offset	= mem0_base;
+	mv_bus1_controller.pcic.io_offset	= 0;
 
 	ioport_resource.end		= io_base + io_size -mv_io_base - 1;
 
-	register_pci_controller(&mv_bus1_controller);
+	register_pci_controller(&mv_bus1_controller.pcic);
 
 	mv_io_size = io_base + io_size - mv_io_base;
 }

arch/mips/momentum/ocelot_c/prom.c

@@ -29,7 +29,7 @@
 
 struct callvectors* debug_vectors;
 
-extern unsigned long mv64340_base;
+extern unsigned long marvell_base;
 extern unsigned long cpu_clock;
 
 #ifdef CONFIG_MV64340_ETH
@@ -180,13 +180,13 @@ void __init prom_init(void)
 			break;
 
 		if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
-			mv64340_base = simple_strtol(ptr + strlen("gtbase="),
+			marvell_base = simple_strtol(ptr + strlen("gtbase="),
 							NULL, 16);
 
-			if ((mv64340_base & 0xffffffff00000000) == 0)
-				mv64340_base |= 0xffffffff00000000;
+			if ((marvell_base & 0xffffffff00000000) == 0)
+				marvell_base |= 0xffffffff00000000;
 
-			printk("mv64340_base set to 0x%016lx\n", mv64340_base);
+			printk("marvell_base set to 0x%016lx\n", marvell_base);
 		}
 		if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
 			cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
@@ -213,7 +213,7 @@ void __init prom_init(void)
 
 	while (*env) {
 		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-			mv64340_base = simple_strtol(*env + strlen("gtbase="),
+			marvell_base = simple_strtol(*env + strlen("gtbase="),
 							NULL, 16);
 		}
 		if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {

arch/mips/momentum/ocelot_c/setup.c

@@ -67,7 +67,7 @@
 #include <asm/mv64340.h>
 #include "ocelot_c_fpga.h"
 
-unsigned long mv64340_base;
+unsigned long marvell_base;
 extern unsigned long mv64340_sram_base;
 unsigned long cpu_clock;
 
@@ -117,7 +117,7 @@ void PMON_v2_setup(void)
 	/* m-sys and internal SRAM */
 	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
 
-	mv64340_base = 0xfffffffff4000000;
+	marvell_base = 0xfffffffff4000000;
 	mv64340_sram_base = 0xfffffffffe000000;
 #else
 	/* marvell and extra space */
@@ -127,7 +127,7 @@ void PMON_v2_setup(void)
 	/* m-sys and internal SRAM */
 	add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
 
-	mv64340_base = 0xf4000000;
+	marvell_base = 0xf4000000;
 	mv64340_sram_base = 0xfe000000;
 #endif
 }

arch/mips/momentum/ocelot_g/gt-irq.c

@@ -114,10 +114,10 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
 	int handled;
 
 	/* get the low interrupt cause register */
-	irq_src = GT_READ(LOW_INTERRUPT_CAUSE_REGISTER);
+	irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
 
 	/* get the mask register for this pin */
-	irq_src_mask = GT_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
+	irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
 
 	/* mask off only the interrupts we're interested in */
 	irq_src = irq_src & irq_src_mask;
@@ -130,7 +130,7 @@ static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
 		irq_src &= ~0x00000100;
 
 		/* Clear any pending cause bits */
-		GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+		MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
 
 		/* handle the timer call */
 		do_timer(regs);
@@ -160,10 +160,10 @@ void gt64240_time_init(void)
 	static struct irqaction timer;
 
 	/* Stop the timer -- we'll use timer #0 */
-	GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
+	MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
 
 	/* Load timer value for 100 Hz */
-	GT_WRITE(TIMER_COUNTER0, bus_clock / 100);
+	MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
 
 	/*
 	 * Create the IRQ structure entry for the timer.  Since we're too early
@@ -181,16 +181,16 @@ void gt64240_time_init(void)
 	enable_irq(6);
 
 	/* Clear any pending cause bits */
-	GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+	MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
 
 	/* Enable the interrupt for timer 0 */
-	GT_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
+	MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
 
 	/* Enable the timer interrupt for GT-64240 pin P0_INT# */
-	GT_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
+	MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
 
 	/* Configure and start the timer */
-	GT_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
+	MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
 }
 
 void gt64240_irq_init(void)

arch/mips/momentum/ocelot_g/prom.c

@@ -26,7 +26,7 @@
 
 struct callvectors* debug_vectors;
 
-extern unsigned long gt64240_base;
+extern unsigned long marvell_base;
 extern unsigned long bus_clock;
 
 #ifdef CONFIG_GALILLEO_GT64240_ETH
@@ -69,7 +69,7 @@ void __init prom_init(void)
 
 	while (*env) {
 		if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
-			gt64240_base = simple_strtol(*env + strlen("gtbase="),
+			marvell_base = simple_strtol(*env + strlen("gtbase="),
 							NULL, 16);
 		}
 		if (strncmp("busclock", *env, strlen("busclock")) == 0) {

arch/mips/momentum/ocelot_g/setup.c

@@ -67,7 +67,7 @@
 extern unsigned char prom_mac_addr_base[6];
 #endif
 
-unsigned long gt64240_base;
+unsigned long marvell_base;
 
 /* These functions are used for rebooting or halting the machine*/
 extern void momenco_ocelot_restart(char *command);
@@ -117,7 +117,7 @@ void PMON_v2_setup(void)
 	add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
 	                    0xfc800000, PM_64K);
 
-	gt64240_base = 0xf4000000;
+	marvell_base = 0xf4000000;
 }
 
 extern int rm7k_tcache_enabled;
@@ -133,7 +133,7 @@ static void __init setup_l3cache(unsigned long size)
 	printk("Enabling L3 cache...");
 
 	/* Enable the L3 cache in the GT64120A's CPU Configuration register */
-	GT_WRITE(0, GT_READ(0) | (1<<14));
+	MV_WRITE(0, MV_READ(0) | (1<<14));
 
 	/* Enable the L3 cache in the CPU */
 	set_c0_config(1<<12 /* CONF_TE */);
@@ -239,7 +239,7 @@ static int  __init momenco_ocelot_g_setup(void)
 	}
 
 	/* FIXME: Fix up the DiskOnChip mapping */
-	GT_WRITE(0x468, 0xfef73);
+	MV_WRITE(0x468, 0xfef73);
 
 	return 0;
 }

arch/mips/pci/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
 obj-$(CONFIG_MIPS_GT64111)	+= ops-gt64111.o
 obj-$(CONFIG_MIPS_GT64120)	+= ops-gt64120.o
 obj-$(CONFIG_MIPS_GT96100)	+= ops-gt96100.o
-obj-$(CONFIG_MIPS_MV64340)	+= ops-mv64340.o
+obj-$(CONFIG_PCI_MARVELL)	+= ops-marvell.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
 obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
@@ -38,8 +38,7 @@ obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o
 obj-$(CONFIG_MOMENCO_JAGUAR_ATX)+= fixup-jaguar.o
 obj-$(CONFIG_MOMENCO_OCELOT)	+= fixup-ocelot.o pci-ocelot.o
 obj-$(CONFIG_MOMENCO_OCELOT_C)	+= fixup-ocelot-c.o pci-ocelot-c.o
-obj-$(CONFIG_MOMENCO_OCELOT_G)	+= fixup-ocelot-g.o ops-gt64240.o pci-ocelot-g.o
-obj-$(CONFIG_NEC_EAGLE)		+= fixup-eagle.o ops-vrc4173.o
+obj-$(CONFIG_MOMENCO_OCELOT_G)	+= fixup-ocelot-g.o pci-ocelot-g.o
 obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 				   pci-yosemite.o
 obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o

arch/mips/pci/fixup-eagle.c

-/*
- * arch/mips/vr41xx/nec-eagle/pci_fixup.c
- *
- * The NEC Eagle/Hawk Board specific PCI fixups.
- *
- * Author: Yoichi Yuasa <you@mvista.com, or source@mvista.com>
- *
- * 2001-2002,2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/vr41xx/eagle.h>
-#include <asm/vr41xx/vrc4173.h>
-
-/*
- * Shortcuts
- */
-#define INTA	CP_INTA_IRQ
-#define INTB	CP_INTB_IRQ
-#define INTC	CP_INTC_IRQ
-#define INTD	CP_INTD_IRQ
-#define PCMCIA1	VRC4173_PCMCIA1_IRQ
-#define PCMCIA2	VRC4173_PCMCIA2_IRQ
-#define LAN	LANINTA_IRQ
-#define SLOT	PCISLOT_IRQ
-
-static char irq_tab_eagle[][5] __initdata = {
- [ 8] = { 0,    INTA, INTB, INTC, INTD },
- [ 9] = { 0,    INTD, INTA, INTB, INTC },
- [10] = { 0,    INTC, INTD, INTA, INTB },
- [12] = { 0, PCMCIA1,    0,    0,    0 },
- [13] = { 0, PCMCIA2,    0,    0,    0 },
- [28] = { 0,     LAN,    0,    0,    0 },
- [29] = { 0,    SLOT, INTB, INTC, INTD },
-};
-
-/*
- * This is a multifunction device.
- */
-static char irq_func_tab[] __initdata = {
-	VRC4173_CASCADE_IRQ,
-	VRC4173_AC97_IRQ,
-	VRC4173_USB_IRQ
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (slot == 30)
-		return irq_func_tab[PCI_FUNC(dev->devfn)];
-
-	return irq_tab_eagle[slot][pin];
-}
-
-struct pci_fixup pcibios_fixups[] __initdata = {
-	{	.pass = 0,	},
-};

arch/mips/pci/ops-gt64240.c

-/*
- * Copyright 2002 Momentum Computer
- * Author: Matthew Dharm <mdharm@momenco.com>
- * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/gt64240.h>
-
-
-#define MASTER_ABORT_BIT 0x100
-
-/*
- * galileo_pcibios_(read/write)_config_(dword/word/byte) -
- *
- * reads/write a dword/word/byte register from the configuration space
- * of a device.
- *
- * Note that bus 0 and bus 1 are local, and we assume all other busses are
- * bridged from bus 1.  This is a safe assumption, since any other
- * configuration will require major modifications to the CP7000G
- *
- * Inputs :
- * bus - bus number
- * dev - device number
- * offset - register offset in the configuration space
- * val - value to be written / read
- *
- * Outputs :
- * PCIBIOS_SUCCESSFUL when operation was succesfull
- * PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous
- * PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned
- */
-
-
-static int gt_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-	int size, u32 *val, u32 address_reg, u32 data_reg)
-{
-	uint32_t address;
-	int dev, busno;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-
-	/* verify the range */
-	if (dev == 31)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
-
-	/* start the configuration cycle */
-	GT_WRITE(address_reg, address);
-
-	switch (size) {
-	case 1:
-		GT_READ_8(data_reg + (offset & 0x3), val);
-		break;
-	case 2:
-		GT_READ_16(data_reg + (offset & 0x3), val);
-		break;
-	case 4:
-		*val = GT_READ(data_reg);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int gt_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-	int size, u32 val, u32 address_reg, u32 data_reg)
-{
-	unsigned int address;
-	int dev, busno;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-
-	/* verify the range */
-	if (dev == 31)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	address = (busno << 16) | (devfn << 8) | (offset & 0xfc) | 0x80000000;
-
-	/* start the configuration cycle */
-	GT_WRITE(address_reg, address);
-
-	switch (size) {
-	case 1:
-		GT_WRITE_8(data_reg + (offset & 0x3), val);
-		break;
-	case 2:
-		GT_WRITE_16(data_reg + (offset & 0x3), val);
-		break;
-	case 4:
-		GT_WRITE(data_reg, val);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#define BUILD_PCI_OPS(host)						\
-									\
-static int gt_bus ## host ## _read_config(struct pci_bus *bus,		\
-	unsigned int devfn, int reg, int size, u32 * val)		\
-{									\
-	return gt_read_config(bus, devfn, reg, size, val,		\
-		PCI_ ## host ## CONFIGURATION_ADDRESS,			\
-		PCI_ ## host ## CONFIGURATION_DATA_VIRTUAL_REGISTER);	\
-}									\
-									\
-static int gt_bus ## host ## _write_config(struct pci_bus *bus,		\
-	unsigned int devfn, int reg, int size, u32 val)			\
-{									\
-	return gt_write_config(bus, devfn, reg, size, val,		\
-		PCI_ ## host ## CONFIGURATION_ADDRESS,			\
-		PCI_ ## host ## CONFIGURATION_DATA_VIRTUAL_REGISTER);	\
-}									\
-									\
-struct pci_ops gt_bus ## host ## _pci_ops = {				\
-	.read	= gt_bus ## host ## _read_config,			\
-	.write	= gt_bus ## host ## _write_config			\
-};
-
-BUILD_PCI_OPS(0)
-BUILD_PCI_OPS(1)

arch/mips/pci/ops-marvell.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+
+#include <asm/marvell.h>
+
+static int mv_read_config(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 * val)
+{
+	struct mv_pci_controller *mvbc = bus->sysdata;
+	unsigned long address_reg, data_reg;
+	u32 address;
+
+	address_reg = mvbc->config_addr;
+	data_reg = mvbc->config_vreg;
+
+	/* Accessing device 31 crashes those Marvells.  Since years.
+	   Will they ever make sane controllers ... */
+	if (PCI_SLOT(devfn) == 31)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = (bus->number << 16) | (devfn << 8) |
+	          (where & 0xfc) | 0x80000000;
+
+	/* start the configuration cycle */
+	MV_WRITE(address_reg, address);
+
+	switch (size) {
+	case 1:
+		*val = MV_READ_8(data_reg + (where & 0x3));
+		break;
+
+	case 2:
+		*val = MV_READ_16(data_reg + (where & 0x3));
+		break;
+
+	case 4:
+		*val = MV_READ(data_reg);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int mv_write_config(struct pci_bus *bus, unsigned int devfn,
+	int where, int size, u32 val)
+{
+	struct mv_pci_controller *mvbc = bus->sysdata;
+	unsigned long address_reg, data_reg;
+	u32 address;
+
+	address_reg = mvbc->config_addr;
+	data_reg = mvbc->config_vreg;
+
+	/* Accessing device 31 crashes those Marvells.  Since years.
+	   Will they ever make sane controllers ... */
+	if (PCI_SLOT(devfn) == 31)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	address = (bus->number << 16) | (devfn << 8) |
+	          (where & 0xfc) | 0x80000000;
+
+	/* start the configuration cycle */
+	MV_WRITE(address_reg, address);
+
+	switch (size) {
+	case 1:
+		MV_WRITE_8(data_reg + (where & 0x3), val);
+		break;
+
+	case 2:
+		MV_WRITE_16(data_reg + (where & 0x3), val);
+		break;
+
+	case 4:
+		MV_WRITE(data_reg, val);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops mv_pci_ops = {
+	.read	= mv_read_config,
+	.write	= mv_write_config
+};

arch/mips/pci/ops-mv64340.c

-/*
- * Copyright 2002 Momentum Computer
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <asm/mv64340.h>
-
-/*
- * galileo_pcibios_(read/write)_config_(dword/word/byte) -
- *
- * reads/write a dword/word/byte register from the configuration space
- * of a device.
- *
- * Note that bus 0 and bus 1 are local, and we assume all other busses are
- * bridged from bus 1.  This is a safe assumption, since any other
- * configuration will require major modifications to the CP7000G
- *
- * Inputs :
- * bus - bus number
- * dev - device number
- * offset - register offset in the configuration space
- * val - value to be written / read
- *
- * Outputs :
- * PCIBIOS_SUCCESSFUL when operation was succesfull
- * PCIBIOS_DEVICE_NOT_FOUND when the bus or dev is errorneous
- * PCIBIOS_BAD_REGISTER_NUMBER when accessing non aligned
- */
-
-static int mv64340_read_config(struct pci_bus *bus, unsigned int devfn, int reg,
-	int size, u32 * val, u32 address_reg, u32 data_reg)
-{
-	u32 address;
-
-	/* Accessing device 31 crashes the MV-64340. */
-	if (PCI_SLOT(devfn) > 5)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	address = (bus->number << 16) | (devfn << 8) |
-		  (reg & 0xfc) | 0x80000000;
-
-	/* start the configuration cycle */
-	MV_WRITE(address_reg, address);
-
-	switch (size) {
-	case 1:
-		*val = MV_READ_8(data_reg + (reg & 0x3));
-		break;
-
-	case 2:
-		*val = MV_READ_16(data_reg + (reg & 0x3));
-		break;
-
-	case 4:
-		*val = MV_READ(data_reg);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int mv64340_write_config(struct pci_bus *bus, unsigned int devfn,
-	int reg, int size, u32 val, u32 address_reg, u32 data_reg)
-{
-	u32 address;
-
-	/* Accessing device 31 crashes the MV-64340. */
-	if (PCI_SLOT(devfn) > 5)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	address = (bus->number << 16) | (devfn << 8) |
-		  (reg & 0xfc) | 0x80000000;
-
-	/* start the configuration cycle */
-	MV_WRITE(address_reg, address);
-
-	switch (size) {
-	case 1:
-		/* write the data */
-		MV_WRITE_8(data_reg + (reg & 0x3), val);
-		break;
-
-	case 2:
-		/* write the data */
-		MV_WRITE_16(data_reg + (reg & 0x3), val);
-		break;
-
-	case 4:
-		/* write the data */
-		MV_WRITE(data_reg, val);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#define BUILD_PCI_OPS(host)						\
-									\
-static int mv64340_bus ## host ## _read_config(struct pci_bus *bus,	\
-	unsigned int devfn, int reg, int size, u32 * val)		\
-{									\
-	return mv64340_read_config(bus, devfn, reg, size, val,		\
-	           MV64340_PCI_ ## host ## _CONFIG_ADDR,		\
-	           MV64340_PCI_ ## host ## _CONFIG_DATA_VIRTUAL_REG);	\
-}									\
-									\
-static int mv64340_bus ## host ## _write_config(struct pci_bus *bus,	\
-	unsigned int devfn, int reg, int size, u32 val)			\
-{									\
-	return mv64340_write_config(bus, devfn, reg, size, val,		\
-	           MV64340_PCI_ ## host ## _CONFIG_ADDR,		\
-	           MV64340_PCI_ ## host ## _CONFIG_DATA_VIRTUAL_REG);	\
-}									\
-									\
-struct pci_ops mv64340_bus ## host ## _pci_ops = {			\
-	.read	= mv64340_bus ## host ## _read_config,			\
-	.write	= mv64340_bus ## host ## _write_config			\
-};
-
-BUILD_PCI_OPS(0)
-BUILD_PCI_OPS(1)

arch/mips/pci/ops-vrc4173.c

-/*
- * FILE NAME
- *	arch/mips/vr41xx/nec-eagle/vrc4173.c
- *
- * BRIEF MODULE DESCRIPTION
- *	Pre-setup for NEC VRC4173.
- *
- * Author: Yoichi Yuasa
- *         yyuasa@mvista.com or source@mvista.com
- *
- * Copyright 2001,2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/vr41xx/eagle.h>
-#include <asm/vr41xx/vrc4173.h>
-
-#define PCI_CONFIG_ADDR	KSEG1ADDR(0x0f000c18)
-#define PCI_CONFIG_DATA	KSEG1ADDR(0x0f000c14)
-
-static inline void config_writeb(u8 reg, u8 val)
-{
-	u32 data;
-	int shift;
-
-	writel((1UL << 0x1e) | (reg & 0xfc), PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	shift = (reg & 3) << 3;
-	data &= ~(0xff << shift);
-	data |= (((u32) val) << shift);
-
-	writel(data, PCI_CONFIG_DATA);
-}
-
-static inline u16 config_readw(u8 reg)
-{
-	u32 data;
-
-	writel(((1UL << 30) | (reg & 0xfc)), PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u16) (data >> ((reg & 2) << 3));
-}
-
-static inline u32 config_readl(u8 reg)
-{
-	writel(((1UL << 30) | (reg & 0xfc)), PCI_CONFIG_ADDR);
-
-	return readl(PCI_CONFIG_DATA);
-}
-
-static inline void config_writel(u8 reg, u32 val)
-{
-	writel((1UL << 0x1e) | (reg & 0xfc), PCI_CONFIG_ADDR);
-	writel(val, PCI_CONFIG_DATA);
-}
-
-void __init vrc4173_preinit(void)
-{
-	u32 cmdsts, base;
-	u16 cmu_mask;
-
-
-	if ((config_readw(PCI_VENDOR_ID) == PCI_VENDOR_ID_NEC) &&
-	    (config_readw(PCI_DEVICE_ID) == PCI_DEVICE_ID_NEC_VRC4173)) {
-		/*
-		 * Initialized NEC VRC4173 Bus Control Unit
-		 */
-		cmdsts = config_readl(PCI_COMMAND);
-		config_writel(PCI_COMMAND,
-			      cmdsts |
-			      PCI_COMMAND_IO |
-			      PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-		config_writeb(PCI_LATENCY_TIMER, 0x80);
-
-		config_writel(PCI_BASE_ADDRESS_0, VR41XX_PCI_IO_START);
-		base = config_readl(PCI_BASE_ADDRESS_0);
-		base &= PCI_BASE_ADDRESS_IO_MASK;
-		config_writeb(0x40, 0x01);
-
-		/* CARDU1 IDSEL = AD12, CARDU2 IDSEL = AD13 */
-		config_writeb(0x41, 0);
-
-		cmu_mask = 0x1000;
-		outw(cmu_mask, base + 0x040);
-		cmu_mask |= 0x0800;
-		outw(cmu_mask, base + 0x040);
-
-		outw(0x000f, base + 0x042);	/* Soft reset of CMU */
-		cmu_mask |= 0x05e0;
-		outw(cmu_mask, base + 0x040);
-		cmu_mask = inw(base + 0x040);	/* dummy read */
-		outw(0x0000, base + 0x042);
-	}
-}

arch/mips/pci/pci-ocelot-c.c

@@ -27,12 +27,14 @@ static struct resource mv_pci_mem0_resource = {
 	.flags	= IORESOURCE_MEM
 };
 
-extern struct pci_ops mv64340_bus0_pci_ops;
-
-static struct pci_controller mv_bus0_controller = {
-	.pci_ops	= &mv64340_bus0_pci_ops,
-	.mem_resource	= &mv_pci_mem0_resource,
-	.io_resource	= &mv_pci_io_mem0_resource,
+static struct mv_pci_controller mv_bus0_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &mv_pci_mem0_resource,
+		.io_resource	= &mv_pci_io_mem0_resource,
+	},
+	.config_addr	= MV64340_PCI_0_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
 };
 
 static uint32_t mv_io_base, mv_io_size;
@@ -47,16 +49,16 @@ static void mv64340_pci0_init(void)
 	mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
 	mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
 
-	mv_pci_io_mem0_resource.start	= 0;
-	mv_pci_io_mem0_resource.end	= io_size - 1;
-	mv_pci_mem0_resource.start	= mem0_base;
-	mv_pci_mem0_resource.end	= mem0_base + mem0_size - 1;
-	mv_bus0_controller.mem_offset	= mem0_base;
-	mv_bus0_controller.io_offset	= 0;
+	mv_pci_io_mem0_resource.start		= 0;
+	mv_pci_io_mem0_resource.end		= io_size - 1;
+	mv_pci_mem0_resource.start		= mem0_base;
+	mv_pci_mem0_resource.end		= mem0_base + mem0_size - 1;
+	mv_bus0_controller.pcic.mem_offset	= mem0_base;
+	mv_bus0_controller.pcic.io_offset	= 0;
 
 	ioport_resource.end		= io_size - 1;
 
-	register_pci_controller(&mv_bus0_controller);
+	register_pci_controller(&mv_bus0_controller.pcic);
 
 	mv_io_base = io_base;
 	mv_io_size = io_size;
@@ -72,12 +74,14 @@ static struct resource mv_pci_mem1_resource = {
 	.flags	= IORESOURCE_MEM
 };
 
-extern struct pci_ops mv64340_bus1_pci_ops;
-
-static struct pci_controller mv_bus1_controller = {
-	.pci_ops	= &mv64340_bus1_pci_ops,
-	.mem_resource	= &mv_pci_mem1_resource,
-	.io_resource	= &mv_pci_io_mem1_resource,
+static struct mv_pci_controller mv_bus1_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &mv_pci_mem1_resource,
+		.io_resource	= &mv_pci_io_mem1_resource,
+	},
+	.config_addr	= MV64340_PCI_1_CONFIG_ADDR,
+	.config_vreg	= MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
 };
 
 static __init void mv64340_pci1_init(void)
@@ -95,16 +99,16 @@ static __init void mv64340_pci1_init(void)
 	 * the first.  A gap is no problem but would waste address space for
 	 * remapping the port space.
 	 */
-	mv_pci_io_mem1_resource.start	= mv_io_size;
-	mv_pci_io_mem1_resource.end	= mv_io_size + io_size - 1;
-	mv_pci_mem1_resource.start	= mem0_base;
-	mv_pci_mem1_resource.end	= mem0_base + mem0_size - 1;
-	mv_bus1_controller.mem_offset	= mem0_base;
-	mv_bus1_controller.io_offset	= 0;
+	mv_pci_io_mem1_resource.start		= mv_io_size;
+	mv_pci_io_mem1_resource.end		= mv_io_size + io_size - 1;
+	mv_pci_mem1_resource.start		= mem0_base;
+	mv_pci_mem1_resource.end		= mem0_base + mem0_size - 1;
+	mv_bus1_controller.pcic.mem_offset	= mem0_base;
+	mv_bus1_controller.pcic.io_offset	= 0;
 
 	ioport_resource.end		= io_base + io_size -mv_io_base - 1;
 
-	register_pci_controller(&mv_bus1_controller);
+	register_pci_controller(&mv_bus1_controller.pcic);
 
 	mv_io_size = io_base + io_size - mv_io_base;
 }

arch/mips/pci/pci-ocelot-g.c

@@ -39,12 +39,16 @@ static struct resource gt_pci_io_mem0_resource = {
 	.flags	= IORESOURCE_IO
 };
 
-static struct pci_controller gt_bus0_controller = {
-	.pci_ops	= &gt_bus0_pci_ops,
-	.mem_resource	= &gt_pci_mem0_resource,
-	.mem_offset	= 0xc0000000UL,
-	.io_resource	= &gt_pci_io_mem0_resource,
-	.io_offset	= 0x00000000UL
+static struct mv_pci_controller gt_bus0_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &gt_pci_mem0_resource,
+		.mem_offset	= 0xc0000000UL,
+		.io_resource	= &gt_pci_io_mem0_resource,
+		.io_offset	= 0x00000000UL
+	},
+	.config_addr	= PCI_0CONFIGURATION_ADDRESS,
+	.config_vreg	= PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
 };
 
 static struct resource gt_pci_mem1_resource = {
@@ -61,12 +65,16 @@ static struct resource gt_pci_io_mem1_resource = {
 	.flags	= IORESOURCE_IO
 };
 
-static struct pci_controller gt_bus1_controller = {
-	.pci_ops	= &gt_bus1_pci_ops,
-	.mem_resource	= &gt_pci_mem1_resource,
-	.mem_offset	= 0xd0000000UL,
-	.io_resource	= &gt_pci_io_mem1_resource,
-	.io_offset	= 0x10000000UL
+static struct mv_pci_controller gt_bus1_controller = {
+	.pcic = {
+		.pci_ops	= &mv_pci_ops,
+		.mem_resource	= &gt_pci_mem1_resource,
+		.mem_offset	= 0xd0000000UL,
+		.io_resource	= &gt_pci_io_mem1_resource,
+		.io_offset	= 0x10000000UL
+	},
+	.config_addr	= PCI_1CONFIGURATION_ADDRESS,
+	.config_vreg	= PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER,
 };
 
 static __init int __init ocelot_g_pci_init(void)
@@ -81,8 +89,8 @@ static __init int __init ocelot_g_pci_init(void)
 		set_io_port_base(io_v_base);
 	}
 
-	register_pci_controller(&gt_bus0_controller);
-	register_pci_controller(&gt_bus1_controller);
+	register_pci_controller(&gt_bus0_controller.pcic);
+	register_pci_controller(&gt_bus1_controller.pcic);
 
 	return 0;
 }

arch/mips/sibyte/sb1250/irq_handler.S

@@ -123,7 +123,7 @@
 	 * check the 1250 interrupt registers to figure out what to do
 	 * Need to detect which CPU we're on, now that smp_affinity is supported.
 	 */
-	la	v0, KSEG1 + A_IMR_CPU0_BASE
+	PTR_LA	v0, KSEG1 + A_IMR_CPU0_BASE
 #ifdef CONFIG_SMP
 	lw	t1, TI_CPU($28)
 	sll	t1, IMR_REGISTER_SPACING_SHIFT

arch/mips/vr41xx/nec-eagle/Makefile

-#
-# Makefile for the NEC Eagle/Hawk specific parts of the kernel
-#
-# Author: Yoichi Yuasa
-#         yyuasa@mvista.com or source@mvista.com
-#
-# Copyright 2001,2002 MontaVista Software Inc.
-#
-
-obj-y			+= irq.o setup.o

arch/mips/vr41xx/nec-eagle/irq.c

-/*
- *  irq.c,  Interrupt routines for the NEC Eagle/Hawk board.
- *
- *  Copyright (C) 2002  MontaVista Software, Inc.
- *    Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *  Copyright (C) 2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/*
- * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
- *  - New creation, NEC Eagle is supported.
- *  - Added support for NEC Hawk.
- *
- *  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
- *  - Changed from board_irq_init to driver module.
- */
-#include <linux/config.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/types.h>
-
-#include <asm/io.h>
-#include <asm/vr41xx/eagle.h>
-
-MODULE_DESCRIPTION("IRQ module driver for NEC Eagle/Hawk");
-MODULE_AUTHOR("Yoichi Yuasa <yyuasa@mvista.com>");
-MODULE_LICENSE("GPL");
-
-static void enable_pciint_irq(unsigned int irq)
-{
-	uint8_t val;
-
-	val = readb(NEC_EAGLE_PCIINTMSKREG);
-	val |= (uint8_t)1 << (irq - PCIINT_IRQ_BASE);
-	writeb(val, NEC_EAGLE_PCIINTMSKREG);
-}
-
-static void disable_pciint_irq(unsigned int irq)
-{
-	uint8_t val;
-
-	val = readb(NEC_EAGLE_PCIINTMSKREG);
-	val &= ~((uint8_t)1 << (irq - PCIINT_IRQ_BASE));
-	writeb(val, NEC_EAGLE_PCIINTMSKREG);
-}
-
-static unsigned int startup_pciint_irq(unsigned int irq)
-{
-	enable_pciint_irq(irq);
-	return 0; /* never anything pending */
-}
-
-#define shutdown_pciint_irq	disable_pciint_irq
-#define ack_pciint_irq		disable_pciint_irq
-
-static void end_pciint_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_pciint_irq(irq);
-}
-
-static struct hw_interrupt_type pciint_irq_type = {
-	.typename	= "PCIINT",
-	.startup	= startup_pciint_irq,
-	.shutdown 	= shutdown_pciint_irq,
-	.enable       	= enable_pciint_irq,
-	.disable	= disable_pciint_irq,
-	.ack		= ack_pciint_irq,
-	.end		= end_pciint_irq,
-};
-
-static void enable_sdbint_irq(unsigned int irq)
-{
-	uint8_t val;
-
-	val = readb(NEC_EAGLE_SDBINTMSK);
-	val |= (uint8_t)1 << (irq - SDBINT_IRQ_BASE);
-	writeb(val, NEC_EAGLE_SDBINTMSK);
-}
-
-static void disable_sdbint_irq(unsigned int irq)
-{
-	uint8_t val;
-
-	val = readb(NEC_EAGLE_SDBINTMSK);
-	val &= ~((uint8_t)1 << (irq - SDBINT_IRQ_BASE));
-	writeb(val, NEC_EAGLE_SDBINTMSK);
-}
-
-static unsigned int startup_sdbint_irq(unsigned int irq)
-{
-	enable_sdbint_irq(irq);
-	return 0; /* never anything pending */
-}
-
-#define shutdown_sdbint_irq	disable_sdbint_irq
-#define ack_sdbint_irq		disable_sdbint_irq
-
-static void end_sdbint_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_sdbint_irq(irq);
-}
-
-static struct hw_interrupt_type sdbint_irq_type = {
-	.typename	= "SDBINT",
-	.startup	= startup_sdbint_irq,
-	.shutdown	= shutdown_sdbint_irq,
-	.enable		= enable_sdbint_irq,
-	.disable	= disable_sdbint_irq,
-	.ack		= ack_sdbint_irq,
-	.end		= end_sdbint_irq,
-};
-
-static int eagle_get_irq_number(int irq)
-{
-	uint8_t sdbint, pciint;
-	int i;
-
-	sdbint = readb(NEC_EAGLE_SDBINT);
-	sdbint &= (NEC_EAGLE_SDBINT_DEG | NEC_EAGLE_SDBINT_ENUM |
-	           NEC_EAGLE_SDBINT_SIO1INT | NEC_EAGLE_SDBINT_SIO2INT |
-	           NEC_EAGLE_SDBINT_PARINT);
-	pciint = readb(NEC_EAGLE_PCIINTREG);
-	pciint &= (NEC_EAGLE_PCIINT_CP_INTA | NEC_EAGLE_PCIINT_CP_INTB |
-	           NEC_EAGLE_PCIINT_CP_INTC | NEC_EAGLE_PCIINT_CP_INTD |
-	           NEC_EAGLE_PCIINT_LANINT);
-
-	for (i = 1; i < 6; i++)
-		if (sdbint & (0x01 << i))
-			return SDBINT_IRQ_BASE + i;
-
-	for (i = 0; i < 5; i++)
-		if (pciint & (0x01 << i))
-			return PCIINT_IRQ_BASE + i;
-
-	return -EINVAL;
-}
-
-static int __devinit eagle_irq_init(void)
-{
-	int i, retval;
-
-	writeb(0, NEC_EAGLE_SDBINTMSK);
-	writeb(0, NEC_EAGLE_PCIINTMSKREG);
-
-	vr41xx_set_irq_trigger(PCISLOT_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(PCISLOT_PIN, LEVEL_HIGH);
-
-	vr41xx_set_irq_trigger(FPGA_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(FPGA_PIN, LEVEL_HIGH);
-
-	vr41xx_set_irq_trigger(DCD_PIN, TRIGGER_EDGE, SIGNAL_HOLD);
-	vr41xx_set_irq_level(DCD_PIN, LEVEL_LOW);
-
-	for (i = SDBINT_IRQ_BASE; i <= SDBINT_IRQ_LAST; i++)
-		irq_desc[i].handler = &sdbint_irq_type;
-
-	for (i = PCIINT_IRQ_BASE; i <= PCIINT_IRQ_LAST; i++)
-		irq_desc[i].handler = &pciint_irq_type;
-
-	retval = vr41xx_cascade_irq(FPGA_CASCADE_IRQ, eagle_get_irq_number);
-	if (retval != 0)
-		printk(KERN_ERR "eagle: Cannot cascade IRQ %d\n", FPGA_CASCADE_IRQ);
-
-	return retval;
-}
-
-static void __devexit eagle_irq_exit(void)
-{
-	free_irq(FPGA_CASCADE_IRQ, NULL);
-}
-
-module_init(eagle_irq_init);
-module_exit(eagle_irq_exit);

arch/mips/vr41xx/nec-eagle/setup.c

-/*
- * arch/mips/vr41xx/nec-eagle/setup.c
- *
- * Setup for the NEC Eagle/Hawk board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/config.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/pci_channel.h>
-#include <asm/vr41xx/eagle.h>
-
-#ifdef CONFIG_PCI
-
-extern void vrc4173_preinit(void);
-
-static struct resource vr41xx_pci_io_resource = {
-	"PCI I/O space",
-	VR41XX_PCI_IO_START,
-	VR41XX_PCI_IO_END,
-	IORESOURCE_IO
-};
-
-static struct resource vr41xx_pci_mem_resource = {
-	"PCI memory space",
-	VR41XX_PCI_MEM_START,
-	VR41XX_PCI_MEM_END,
-	IORESOURCE_MEM
-};
-
-extern struct pci_ops vr41xx_pci_ops;
-
-struct pci_controller vr41xx_controller = {
-	.pci_ops	= &vr41xx_pci_ops,
-	.io_resource	= &vr41xx_pci_io_resource,
-	.mem_resource	= &vr41xx_pci_mem_resource,
-};
-
-struct vr41xx_pci_address_space vr41xx_pci_mem1 = {
-	VR41XX_PCI_MEM1_BASE,
-	VR41XX_PCI_MEM1_MASK,
-	IO_MEM1_RESOURCE_START
-};
-
-struct vr41xx_pci_address_space vr41xx_pci_mem2 = {
-	VR41XX_PCI_MEM2_BASE,
-	VR41XX_PCI_MEM2_MASK,
-	IO_MEM2_RESOURCE_START
-};
-
-struct vr41xx_pci_address_space vr41xx_pci_io = {
-	VR41XX_PCI_IO_BASE,
-	VR41XX_PCI_IO_MASK,
-	IO_PORT_RESOURCE_START
-};
-
-static struct vr41xx_pci_address_map pci_address_map = {
-	&vr41xx_pci_mem1,
-	&vr41xx_pci_mem2,
-	&vr41xx_pci_io
-};
-#endif
-
-const char *get_system_type(void)
-{
-	return "NEC SDB-VR4122/VR4131(Eagle/Hawk)";
-}
-
-static int nec_eagle_setup(void)
-{
-	set_io_port_base(IO_PORT_BASE);
-	ioport_resource.start = IO_PORT_RESOURCE_START;
-	ioport_resource.end = IO_PORT_RESOURCE_END;
-
-#ifdef CONFIG_SERIAL_8250
-	vr41xx_select_siu_interface(SIU_RS232C, IRDA_NONE);
-	vr41xx_siu_init();
-	vr41xx_dsiu_init();
-#endif
-
-#ifdef CONFIG_PCI
-	vr41xx_pciu_init(&pci_address_map);
-
-	vrc4173_preinit();
-#endif
-
-	return 0;
-}
-
-early_initcall(nec_eagle_setup);

arch/ppc/Kconfig

@@ -705,6 +705,16 @@ config MPC10X_BRIDGE
 	depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
 	default y
 
+config FSL_OCP
+	bool
+	depends on MPC10X_BRIDGE
+	default y
+
+config MPC10X_OPENPIC
+	bool
+	depends on POWERPMC250 || LOPEC || SANDPOINT
+	default y
+
 config MPC10X_STORE_GATHERING
 	bool "Enable MPC10x store gathering"
 	depends on MPC10X_BRIDGE

arch/ppc/configs/ebony_defconfig

@@ -30,6 +30,7 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -56,6 +57,8 @@ CONFIG_44x=y
 # CONFIG_POWER3 is not set
 # CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+# CONFIG_E500 is not set
+CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_CPU_FREQ is not set
@@ -68,7 +71,6 @@ CONFIG_EBONY=y
 # CONFIG_OCOTEA is not set
 CONFIG_440GP=y
 CONFIG_440=y
-CONFIG_BOOKE=y
 CONFIG_IBM_OCP=y
 # CONFIG_PM is not set
 CONFIG_NOT_COHERENT_CACHE=y
@@ -106,6 +108,8 @@ CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_BOOT_LOAD=0x01000000
 
 #
@@ -115,6 +119,7 @@ CONFIG_BOOT_LOAD=0x01000000
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -141,7 +146,7 @@ CONFIG_BOOT_LOAD=0x01000000
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_LBD=y
 
@@ -247,6 +252,7 @@ CONFIG_NETFILTER=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -272,6 +278,12 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_IBM_EMAC_ERRMSG is not set
+CONFIG_IBM_EMAC_RXB=64
+CONFIG_IBM_EMAC_TXB=8
+CONFIG_IBM_EMAC_FGAP=8
+CONFIG_IBM_EMAC_SKBRES=0
 
 #
 # Ethernet (1000 Mbit)
@@ -310,7 +322,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 
@@ -544,6 +555,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
 #
 # Kernel hacking
 #

arch/ppc/configs/ocotea_defconfig

@@ -21,18 +21,22 @@ CONFIG_BROKEN_ON_SMP=y
 #
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 
 #
@@ -54,6 +58,8 @@ CONFIG_44x=y
 # CONFIG_POWER3 is not set
 # CONFIG_POWER4 is not set
 # CONFIG_8xx is not set
+# CONFIG_E500 is not set
+CONFIG_BOOKE=y
 CONFIG_PTE_64BIT=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_CPU_FREQ is not set
@@ -66,9 +72,7 @@ CONFIG_4xx=y
 CONFIG_OCOTEA=y
 CONFIG_440GX=y
 CONFIG_440A=y
-CONFIG_BOOKE=y
 CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
 CONFIG_IBM_EMAC4=y
 # CONFIG_PM is not set
 CONFIG_NOT_COHERENT_CACHE=y
@@ -106,6 +110,8 @@ CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_BOOT_LOAD=0x01000000
 
 #
@@ -115,6 +121,7 @@ CONFIG_BOOT_LOAD=0x01000000
 #
 # Generic Driver Options
 #
+CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -141,7 +148,7 @@ CONFIG_BOOT_LOAD=0x01000000
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_LBD is not set
 
@@ -163,7 +170,6 @@ CONFIG_BOOT_LOAD=0x01000000
 #
 # Fusion MPT device support
 #
-# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -212,8 +218,6 @@ CONFIG_IP_PNP_BOOTP=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -232,7 +236,9 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -248,21 +254,27 @@ CONFIG_NETFILTER=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
 
 #
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -279,6 +291,12 @@ CONFIG_NET_ETHERNET=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_IBM_EMAC_ERRMSG is not set
+CONFIG_IBM_EMAC_RXB=128
+CONFIG_IBM_EMAC_TXB=128
+CONFIG_IBM_EMAC_FGAP=8
+CONFIG_IBM_EMAC_SKBRES=0
 # CONFIG_NET_PCI is not set
 
 #
@@ -291,7 +309,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 
@@ -299,51 +316,28 @@ CONFIG_NET_ETHERNET=y
 # Ethernet (10000 Mbit)
 #
 # CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
+# CONFIG_S2IO is not set
 
 #
 # Token Ring devices
 #
 # CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
 
 #
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
+# Wireless LAN (non-hamradio)
 #
-# CONFIG_IRDA is not set
+# CONFIG_NET_RADIO is not set
 
 #
-# Bluetooth support
+# Wan interfaces
 #
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # ISDN subsystem
@@ -515,6 +509,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
@@ -555,7 +550,6 @@ CONFIG_SUNRPC=y
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -573,6 +567,12 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
 
 #
 # Kernel hacking
@@ -587,7 +587,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_BDI_SWITCH=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
+CONFIG_PPC_OCP=y
 
 #
 # Security options

arch/ppc/kernel/head_44x.S

@@ -177,11 +177,11 @@ skpinv:	addi	r4,r4,1				/* Increment */
 	rfi
 
 	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,62
+3:	cmpwi	r23,63
 	beq	4f
 	li	r6,0
 	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	sync
+	isync
 
 4:
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
@@ -680,7 +680,7 @@ interrupt_base:
 	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
 	stw	r4,_ESR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x700, ProgramCheckException)
+	EXC_XFER_STD(0x700, ProgramCheckException)
 
 	/* Floating Point Unavailable Interrupt */
 	EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)

arch/ppc/kernel/head_4xx.S

@@ -451,7 +451,7 @@ label:
 	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
 	stw	r4,_ESR(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x700, ProgramCheckException)
+	EXC_XFER_STD(0x700, ProgramCheckException)
 
 	EXCEPTION(0x0800, Trap_08, UnknownException, EXC_XFER_EE)
 	EXCEPTION(0x0900, Trap_09, UnknownException, EXC_XFER_EE)

arch/ppc/platforms/lopec_setup.c

@@ -192,21 +192,8 @@ lopec_init_IRQ(void)
 	OpenPIC_InitSenses = lopec_openpic_initsenses;
 	OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
 
-	/*
-	 * We need to tell openpic_set_sources where things actually are.
-	 * mpc10x_common will setup OpenPIC_Addr at ioremap(EUMB phys base +
-	 * EPIC offset (0x40000));  The EPIC IRQ Register Address Map -
-	 * Interrupt Source Configuration Registers gives these numbers
-	 * as offsets starting at 0x50200, we need to adjust occordinly.
-	 */
-	/* Map serial interrupts 0-15 */
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10200);
-	/* Skip reserved space and map i2c and DMA Ch[01] */
-	openpic_set_sources(16, 3, OpenPIC_Addr + 0x11020);
-	/* Skip reserved space and map Message Unit Interrupt (I2O) */
-	openpic_set_sources(19, 1, OpenPIC_Addr + 0x110C0);
-
-	openpic_init(NUM_8259_INTERRUPTS);
+	mpc10x_set_openpic();
+
 	/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
 	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 			&i8259_irq);

arch/ppc/platforms/powerpmc250.c

@@ -197,7 +197,7 @@ powerpmc250_init_IRQ(void)
 
 	OpenPIC_InitSenses = powerpmc250_openpic_initsenses;
 	OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses);
-	openpic_init(1, 0, 0, -1);
+	mpc10x_set_openpic();
 }
 
 /*

arch/ppc/platforms/sandpoint.c

@@ -433,17 +433,7 @@ sandpoint_init_IRQ(void)
 	OpenPIC_InitSenses = sandpoint_openpic_initsenses;
 	OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
 
-	/*
-	 * We need to tell openpic_set_sources where things actually are.
-	 * mpc10x_common will setup OpenPIC_Addr at ioremap(EUMB phys base +
-	 * EPIC offset (0x40000));  The EPIC IRQ Register Address Map -
-	 * Interrupt Source Configuration Registers gives these numbers
-	 * as offsets starting at 0x50200, we need to adjust occordinly.
-	 */
-	/* Map serial interrupts 0-15 */
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10200);
-
-	openpic_init(NUM_8259_INTERRUPTS);
+	mpc10x_set_openpic();
 	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
 			i8259_irq);
 

arch/ppc/syslib/Makefile

@@ -48,7 +48,7 @@ obj-$(CONFIG_EV64260)		+= gt64260_common.o gt64260_pic.o \
 obj-$(CONFIG_GEMINI)		+= open_pic.o indirect_pci.o
 obj-$(CONFIG_K2)		+= i8259.o indirect_pci.o todc_time.o \
 					pci_auto.o
-obj-$(CONFIG_LOPEC)		+= pci_auto.o open_pic.o i8259.o todc_time.o
+obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
 obj-$(CONFIG_MCPN765)		+= todc_time.o indirect_pci.o pci_auto.o \
 					open_pic.o i8259.o hawk_common.o
 obj-$(CONFIG_MENF1)		+= todc_time.o i8259.o mpc10x_common.o \
@@ -58,14 +58,14 @@ obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o indirect_pci.o \
 obj-$(CONFIG_OCOTEA)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_PAL4)		+= cpc700_pic.o
 obj-$(CONFIG_PCORE)		+= todc_time.o i8259.o pci_auto.o
-obj-$(CONFIG_POWERPMC250)	+= open_pic.o pci_auto.o
+obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
 obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o i8259.o \
 				   indirect_pci.o todc_time.o pci_auto.o
 obj-$(CONFIG_PRPMC750)		+= open_pic.o indirect_pci.o pci_auto.o \
 					hawk_common.o
 obj-$(CONFIG_HARRIER)		+= harrier.o
 obj-$(CONFIG_PRPMC800)		+= open_pic.o indirect_pci.o pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= i8259.o open_pic.o pci_auto.o todc_time.o
+obj-$(CONFIG_SANDPOINT)		+= i8259.o pci_auto.o todc_time.o
 obj-$(CONFIG_SBC82xx)		+= todc_time.o
 obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o indirect_pci.o pci_auto.o \
 				   todc_time.o
@@ -79,6 +79,7 @@ obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
 endif
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_MPC10X_BRIDGE)     += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
 obj-$(CONFIG_40x)		+= dcr.o
 obj-$(CONFIG_BOOKE)		+= dcr.o
 obj-$(CONFIG_85xx)		+= open_pic.o ppc85xx_common.o ppc85xx_setup.o

arch/ppc/syslib/ibm440gp_common.c

@@ -30,7 +30,8 @@ void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
 {
 	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
 	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
-	u32 opdv, epdv;
+	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
+	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
 
 	if (cpc0_sys0 & 0x2){
 		/* Bypass system PLL */
@@ -60,9 +61,6 @@ void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
 		p->plb = vco / fwdvb;
 	}
 
-	opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
-	epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
-
 	p->opb = p->plb / opdv;
 	p->ebc = p->opb / epdv;
 

arch/ppc/syslib/mpc10x_common.c

@@ -30,7 +30,60 @@
 #include <asm/pci-bridge.h>
 #include <asm/open_pic.h>
 #include <asm/mpc10x.h>
+#include <asm/ocp.h>
+
+/* The OCP structure is fixed by code below, before OCP initialises.
+   paddr depends on where the board places the EUMB.
+    - fixed in mpc10x_bridge_init().
+   irq depends on two things:
+    > does the board use the EPIC at all? (PCORE does not).
+    > is the EPIC in serial or parallel mode?
+    - fixed in mpc10x_set_openpic().
+*/
+
+#ifdef CONFIG_MPC10X_OPENPIC
+#ifdef CONFIG_EPIC_SERIAL_MODE
+#define EPIC_IRQ_BASE 16
+#else
+#define EPIC_IRQ_BASE 5
+#endif
+#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
+#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
+#else
+#define MPC10X_I2C_IRQ OCP_IRQ_NA
+#define MPC10X_DMA0_IRQ OCP_IRQ_NA
+#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#endif
+
 
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+static struct ocp_fs_i2c_data mpc10x_i2c_data = {
+	.flags		= 0
+};
+static struct ocp_def mpc10x_i2c_ocp = {
+	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_IIC,
+	.index		= 0,
+	.irq		= MPC10X_I2C_IRQ,
+	.additions	= &mpc10x_i2c_data
+};
+
+static struct ocp_def mpc10x_dma_ocp[2] = {
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 0,
+	.irq		= MPC10X_DMA0_IRQ
+},
+{	.vendor		= OCP_VENDOR_MOTOROLA,
+	.function	= OCP_FUNC_DMA,
+	.index		= 1,
+	.irq		= MPC10X_DMA1_IRQ }
+};
 
 /* Set resources to match bridge memory map */
 void __init
@@ -231,11 +284,21 @@ mpc10x_bridge_init(struct pci_controller *hose,
 					 PCI_DEVFN(0,0),
 					 MPC10X_CFG_EUMBBAR,
 					 phys_eumb_base);
-
-		/* Map EPIC register part of EUMB into vitual memory */
+#ifdef CONFIG_MPC10X_OPENPIC
+		/* Map EPIC register part of EUMB into vitual memory  - PCORE
+		   uses an i8259 instead of EPIC. */
 		OpenPIC_Addr =
 			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
 				MPC10X_EUMB_EPIC_SIZE);
+#endif
+		mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
+		ocp_add_one_device(&mpc10x_i2c_ocp);
+		mpc10x_dma_ocp[0].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x100;
+		ocp_add_one_device(&mpc10x_dma_ocp[0]);
+		mpc10x_dma_ocp[1].paddr = phys_eumb_base +
+					MPC10X_EUMB_DMA_OFFSET + 0x200;
+		ocp_add_one_device(&mpc10x_dma_ocp[1]);
 	}
 
 #ifdef CONFIG_MPC10X_STORE_GATHERING
@@ -397,3 +460,17 @@ mpc10x_disable_store_gathering(struct pci_controller *hose)
 
 	return 0;
 }
+
+#ifdef CONFIG_MPC10X_OPENPIC
+void __init mpc10x_set_openpic(void)
+{
+	/* Map external IRQs */
+	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
+	/* Skip reserved space and map i2c and DMA Ch[01] */
+	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
+	/* Skip reserved space and map Message Unit Interrupt (I2O) */
+	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
+
+	openpic_init(NUM_8259_INTERRUPTS);
+}
+#endif

arch/ppc/syslib/ppc4xx_pic.c

@@ -234,6 +234,9 @@ ppc4xx_uic_disable_and_ack(unsigned int irq)
 	case 1:
 		mtdcr(DCRN_UIC_ER(UIC1), ppc_cached_irq_mask[word]);
 		mtdcr(DCRN_UIC_SR(UIC1), (1 << (31 - bit)));
+#if (NR_UICS == 2)
+		mtdcr(DCRN_UIC_SR(UIC0), (1 << (31 - UIC0_UIC1NC)));
+#endif
 #if (NR_UICS > 2)
 		mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
 #endif
@@ -285,6 +288,9 @@ ppc4xx_uic_end(unsigned int irq)
 			break;
 		case 1:
 			mtdcr(DCRN_UIC_SR(UIC1), 1 << (31 - bit));
+#if (NR_UICS == 2)
+			mtdcr(DCRN_UIC_SR(UIC0), (1 << (31 - UIC0_UIC1NC)));
+#endif
 #if (NR_UICS > 2)
 			mtdcr(DCRN_UIC_SR(UICB),  UICB_UIC1NC);
 #endif
@@ -423,7 +429,7 @@ ppc4xx_extpic_init(void)
 		       bit, sense);
 #endif
 		ppc_cached_sense_mask[word] |=
-		    (sense & IRQ_SENSE_MASK) << (31 - bit);
+		    (~sense & IRQ_SENSE_MASK) << (31 - bit);
 		ppc_cached_pol_mask[word] |=
 		    ((sense & IRQ_POLARITY_MASK) >> 1) << (31 - bit);
 		switch (word) {

arch/ppc64/kernel/ItLpQueue.c

@@ -161,7 +161,7 @@ unsigned ItLpQueue_process( struct ItLpQueue * lpQueue, struct pt_regs *regs )
 	mb();
 	clear_inUse( lpQueue );
 
-	get_paca()->lpEvent_count += numIntsProcessed;
+	get_paca()->lpevent_count += numIntsProcessed;
 
 	return numIntsProcessed;
 }

arch/ppc64/kernel/chrp_setup.c

@@ -189,7 +189,7 @@ chrp_init2(void)
  */
 void __init fwnmi_init(void)
 {
-	long ret;
+	int ret;
 	int ibm_nmi_register = rtas_token("ibm,nmi-register");
 	if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
 		return;

arch/ppc64/kernel/iSeries_proc.c

@@ -68,7 +68,7 @@ static int proc_lpevents_show(struct seq_file *m, void *v)
 	seq_printf(m, "\n  events processed by processor:\n");
 
 	for_each_online_cpu(i)
-		seq_printf(m, "    CPU%02d  %10u\n", i, paca[i].lpEvent_count);
+		seq_printf(m, "    CPU%02d  %10u\n", i, paca[i].lpevent_count);
 
 	return 0;
 }