Commit 9d162ed6 authored by Sean Nyekjaer's avatar Sean Nyekjaer Committed by David S. Miller

net: phy: micrel: add support for KSZ8795

This is adds support for the PHYs in the KSZ8795 5port managed switch.

It will allow to detect the link between the switch and the soc
and uses the same read_status functions as the KSZ8873MLL switch.
Signed-off-by: default avatarSean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 95120ebf
...@@ -1008,6 +1008,20 @@ static struct phy_driver ksphy_driver[] = { ...@@ -1008,6 +1008,20 @@ static struct phy_driver ksphy_driver[] = {
.get_stats = kszphy_get_stats, .get_stats = kszphy_get_stats,
.suspend = genphy_suspend, .suspend = genphy_suspend,
.resume = genphy_resume, .resume = genphy_resume,
}, {
.phy_id = PHY_ID_KSZ8795,
.phy_id_mask = MICREL_PHY_ID_MASK,
.name = "Micrel KSZ8795",
.features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
.config_init = kszphy_config_init,
.config_aneg = ksz8873mll_config_aneg,
.read_status = ksz8873mll_read_status,
.get_sset_count = kszphy_get_sset_count,
.get_strings = kszphy_get_strings,
.get_stats = kszphy_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
} }; } };
module_phy_driver(ksphy_driver); module_phy_driver(ksphy_driver);
......
...@@ -35,6 +35,8 @@ ...@@ -35,6 +35,8 @@
#define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ886X 0x00221430
#define PHY_ID_KSZ8863 0x00221435 #define PHY_ID_KSZ8863 0x00221435
#define PHY_ID_KSZ8795 0x00221550
/* struct phy_device dev_flags definitions */ /* struct phy_device dev_flags definitions */
#define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_50MHZ_CLK 0x00000001
#define MICREL_PHY_FXEN 0x00000002 #define MICREL_PHY_FXEN 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment