Commit 9df81dd7 authored by Florian Fainelli's avatar Florian Fainelli Committed by David S. Miller

net: phy: allow PHY drivers to implement their own software reset

As pointed out by Shaohui, most 10G PHYs out there have a non-standard
compliant software reset sequence, eventually something much more
complex than just toggling the BMCR_RESET bit. Allow PHY driver to
implement their own soft_reset() callback to deal with that. If no
callback is provided, call into genphy_soft_reset() which makes sure the
existing behavior is kept intact.
Reported-by: default avatarShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 797ac071
......@@ -535,12 +535,16 @@ static int phy_poll_reset(struct phy_device *phydev)
int phy_init_hw(struct phy_device *phydev)
{
int ret;
int ret = 0;
if (!phydev->drv || !phydev->drv->config_init)
return 0;
ret = genphy_soft_reset(phydev);
if (phydev->drv->soft_reset)
ret = phydev->drv->soft_reset(phydev);
else
ret = genphy_soft_reset(phydev);
if (ret < 0)
return ret;
......@@ -1108,6 +1112,12 @@ static int genphy_config_init(struct phy_device *phydev)
return 0;
}
static int gen10g_soft_reset(struct phy_device *phydev)
{
/* Do nothing for now */
return 0;
}
static int gen10g_config_init(struct phy_device *phydev)
{
/* Temporarily just say we support everything */
......@@ -1282,6 +1292,7 @@ static struct phy_driver genphy_driver[] = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
.soft_reset = genphy_soft_reset,
.config_init = genphy_config_init,
.features = 0,
.config_aneg = genphy_config_aneg,
......@@ -1294,6 +1305,7 @@ static struct phy_driver genphy_driver[] = {
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic 10G PHY",
.soft_reset = gen10g_soft_reset,
.config_init = gen10g_config_init,
.features = 0,
.config_aneg = gen10g_config_aneg,
......
......@@ -439,6 +439,11 @@ struct phy_driver {
u32 features;
u32 flags;
/*
* Called to issue a PHY software reset
*/
int (*soft_reset)(struct phy_device *phydev);
/*
* Called to initialize the PHY,
* including after a reset
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment