Commit 9e4dee95 authored by Yegor Yefremov's avatar Yegor Yefremov Committed by Tony Lindgren

ARM: dts: add DTS for NetCom Plus 1xx and 2xx device series

This DTS file covers all one and two port NetCom Plus devices.
Signed-off-by: default avatarYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 87e6c8d7
......@@ -754,6 +754,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-netcan-plus-1xx.dtb \
am335x-netcom-plus-2xx.dtb \
am335x-pdu001.dtb \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
......
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*/
/*
* VScom OnRISC
* http://www.vscom.de
*/
/dts-v1/;
#include "am335x-baltos.dtsi"
#include "am335x-baltos-leds.dtsi"
/ {
model = "NetCom Plus";
};
&am33xx_pinmux {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0) /* RX */
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0) /* TX */
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0) /* CTS */
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* RTS */
AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1) /* RX */
AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1) /* TX */
AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2) /* CTS */
AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* RTS */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* DTR */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DSR */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7) /* DCD */
AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7) /* RI */
>;
};
};
&usb0_phy {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <1>;
};
};
&cpsw_emac0 {
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
phy-handle = <&phy0>;
};
&cpsw_emac1 {
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment