Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes for the I2C subsystem"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mv64xxx: Document the newly introduced allwinner compatible
  i2c: Fix Kontron PLD prescaler calculation
  i2c: i2c-mxs: Use DMA mode even for small transfers

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -4,7 +4,7 @@
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c"
+ - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :

drivers/i2c/busses/i2c-kempld.c

@@ -246,9 +246,9 @@ static void kempld_i2c_device_init(struct kempld_i2c_data *i2c)
 		bus_frequency = KEMPLD_I2C_FREQ_MAX;
 
 	if (pld->info.spec_major == 1)
-		prescale = pld->pld_clock / bus_frequency * 5 - 1000;
+		prescale = pld->pld_clock / (bus_frequency * 5) - 1000;
 	else
-		prescale = pld->pld_clock / bus_frequency * 4 - 3000;
+		prescale = pld->pld_clock / (bus_frequency * 4) - 3000;
 
 	if (prescale < 0)
 		prescale = 0;

drivers/i2c/busses/i2c-mxs.c

@@ -493,7 +493,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	 * based on this empirical measurement and a lot of previous frobbing.
 	 */
 	i2c->cmd_err = 0;
-	if (msg->len < 8) {
+	if (0) {	/* disable PIO mode until a proper fix is made */
 		ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
 		if (ret)
 			mxs_i2c_reset(i2c);