usb: dwc2: Add safety check for STSPHSERCVD intr

STSPHSERCVD (status phase received) interrupt should be
handled when EP0 is in DWC2_EP0_DATA_OUT state.

Sometimes STSPHSERCVD interrupt asserted , when EP0
is not in DATA_OUT state. Spurios interrupt.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc2/gadget.c

@@ -2976,9 +2976,13 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 	if (ints & DXEPINT_STSPHSERCVD) {
 		dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__);
 
-		/* Move to STATUS IN for DDMA */
-		if (using_desc_dma(hsotg))
-			dwc2_hsotg_ep0_zlp(hsotg, true);
+		/* Safety check EP0 state when STSPHSERCVD asserted */
+		if (hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
+			/* Move to STATUS IN for DDMA */
+			if (using_desc_dma(hsotg))
+				dwc2_hsotg_ep0_zlp(hsotg, true);
+		}
+
 	}
 
 	if (ints & DXEPINT_BACK2BACKSETUP)