Commit 9ef7e18b authored by Dan Murphy's avatar Dan Murphy Committed by David S. Miller

net: phy: dp83822: Update the fiber advertisement for speed

Update the fiber advertisement for speed and duplex modes with the
100base-FX full and half linkmode entries.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a29de52b
......@@ -110,9 +110,8 @@
#define DP83822_RX_ER_SHIFT 8
#define MII_DP83822_FIBER_ADVERTISE (ADVERTISED_TP | ADVERTISED_MII | \
ADVERTISED_FIBRE | ADVERTISED_BNC | \
ADVERTISED_Pause | ADVERTISED_Asym_Pause | \
ADVERTISED_100baseT_Full)
ADVERTISED_FIBRE | \
ADVERTISED_Pause | ADVERTISED_Asym_Pause)
struct dp83822_private {
bool fx_signal_det_low;
......@@ -406,6 +405,14 @@ static int dp83822_config_init(struct phy_device *phydev)
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
phydev->advertising);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
phydev->supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
phydev->advertising);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
phydev->advertising);
/* Auto neg is not supported in fiber mode */
bmcr = phy_read(phydev, MII_BMCR);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment