Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/Kconfig

@@ -356,6 +356,16 @@ config HOTPLUG_CPU
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
 
+config LOCAL_TIMERS
+	bool "Use local timer interrupts"
+	depends on SMP && n
+	default y
+	help
+	  Enable support for local timers on SMP platforms, rather then the
+	  legacy IPI broadcast method.  Local timers allows the system
+	  accounting to be spread across the timer interval, preventing a
+	  "thundering herd" at every timer tick.
+
 config PREEMPT
 	bool "Preemptible Kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL

arch/arm/boot/compressed/misc.c

@@ -283,8 +283,14 @@ void flush_window(void)
 	putstr(".");
 }
 
+#ifndef arch_error
+#define arch_error(x)
+#endif
+
 static void error(char *x)
 {
+	arch_error(x);
+
 	putstr("\n\n");
 	putstr(x);
 	putstr("\n\n -- System halted");

arch/arm/common/scoop.c

@@ -19,12 +19,6 @@
 
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
-/* PCMCIA to Scoop linkage structures for pxa2xx_sharpsl.c
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device */
-int scoop_num;
-struct scoop_pcmcia_dev *scoop_devs;
-
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;

arch/arm/kernel/armksyms.c

@@ -9,6 +9,7 @@
  */
 #include <linux/module.h>
 #include <linux/string.h>
+#include <linux/cryptohash.h>
 #include <linux/delay.h>
 #include <linux/in6.h>
 #include <linux/syscalls.h>
@@ -126,6 +127,9 @@ EXPORT_SYMBOL(__put_user_2);
 EXPORT_SYMBOL(__put_user_4);
 EXPORT_SYMBOL(__put_user_8);
 
+	/* crypto hash */
+EXPORT_SYMBOL(sha_transform);
+
 	/* gcc lib functions */
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);

arch/arm/kernel/entry-armv.S

@@ -47,6 +47,13 @@
 	movne	r0, sp
 	adrne	lr, 1b
 	bne	do_IPI
+
+#ifdef CONFIG_LOCAL_TIMERS
+	test_for_ltirq r0, r6, r5, lr
+	movne	r0, sp
+	adrne	lr, 1b
+	bne	do_local_timer
+#endif
 #endif
 
 	.endm

arch/arm/kernel/irq.c

@@ -264,6 +264,7 @@ int show_interrupts(struct seq_file *p, void *v)
 #endif
 #ifdef CONFIG_SMP
 		show_ipi_list(p);
+		show_local_irqs(p);
 #endif
 		seq_printf(p, "Err: %10lu\n", irq_err_count);
 	}
@@ -995,7 +996,7 @@ void __init init_irq_proc(void)
 	struct proc_dir_entry *dir;
 	int irq;
 
-	dir = proc_mkdir("irq", 0);
+	dir = proc_mkdir("irq", NULL);
 	if (!dir)
 		return;
 

arch/arm/kernel/smp.c

@@ -142,7 +142,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			ret = -EIO;
 	}
 
-	secondary_data.stack = 0;
+	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
 	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
@@ -184,6 +184,11 @@ int __cpuexit __cpu_disable(void)
 	 */
 	migrate_irqs();
 
+	/*
+	 * Stop the local timer for this CPU.
+	 */
+	local_timer_stop(cpu);
+
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
 	 * from the vm mask set of all processes.
@@ -289,6 +294,11 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 */
 	cpu_set(cpu, cpu_online_map);
 
+	/*
+	 * Setup local timer for this CPU.
+	 */
+	local_timer_setup(cpu);
+
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
@@ -359,8 +369,8 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
  * You must not call this function with disabled interrupts, from a
  * hardware interrupt handler, nor from a bottom half handler.
  */
-int smp_call_function_on_cpu(void (*func)(void *info), void *info, int retry,
-                             int wait, cpumask_t callmap)
+static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
+				    int retry, int wait, cpumask_t callmap)
 {
 	struct smp_call_struct data;
 	unsigned long timeout;
@@ -454,6 +464,18 @@ void show_ipi_list(struct seq_file *p)
 	seq_putc(p, '\n');
 }
 
+void show_local_irqs(struct seq_file *p)
+{
+	unsigned int cpu;
+
+	seq_printf(p, "LOC: ");
+
+	for_each_present_cpu(cpu)
+		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+
+	seq_putc(p, '\n');
+}
+
 static void ipi_timer(struct pt_regs *regs)
 {
 	int user = user_mode(regs);
@@ -464,6 +486,18 @@ static void ipi_timer(struct pt_regs *regs)
 	irq_exit();
 }
 
+#ifdef CONFIG_LOCAL_TIMERS
+asmlinkage void do_local_timer(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	if (local_timer_ack()) {
+		irq_stat[cpu].local_timer_irqs++;
+		ipi_timer(regs);
+	}
+}
+#endif
+
 /*
  * ipi_call_function - handle IPI from smp_call_function()
  *
@@ -515,7 +549,7 @@ static void ipi_cpu_stop(unsigned int cpu)
  *
  *  Bit 0 - Inter-processor function call
  */
-void do_IPI(struct pt_regs *regs)
+asmlinkage void do_IPI(struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
 	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);

arch/arm/mach-pxa/corgi.c

@@ -62,6 +62,37 @@ static struct scoop_config corgi_scoop_setup = {
 	.io_out		= CORGI_SCOOP_IO_OUT,
 };
 
+struct platform_device corgiscoop_device = {
+	.name		= "sharp-scoop",
+	.id		= -1,
+	.dev		= {
+ 		.platform_data	= &corgi_scoop_setup,
+	},
+	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
+	.resource	= corgi_scoop_resources,
+};
+
+static void corgi_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -71,16 +102,14 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 },
 };
 
-struct platform_device corgiscoop_device = {
-	.name		= "sharp-scoop",
-	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_scoop_setup,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_scoop_resources),
-	.resource	= corgi_scoop_resources,
+static struct scoop_pcmcia_config corgi_pcmcia_config = {
+	.devs         = &corgi_pcmcia_scoop[0],
+	.num_devs     = 1,
+	.pcmcia_init  = corgi_pcmcia_init,
 };
 
+EXPORT_SYMBOL(corgiscoop_device);
+
 
 /*
  * Corgi SSP Device
@@ -294,8 +323,7 @@ static void __init corgi_init(void)
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 
-	scoop_num = 1;
-	scoop_devs = &corgi_pcmcia_scoop[0];
+	platform_scoop_config = &corgi_pcmcia_config;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

arch/arm/mach-pxa/poodle.c

@@ -65,6 +65,27 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
+static void poodle_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
 static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 {
 	.dev        = &poodle_scoop_device.dev,
@@ -74,6 +95,14 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 },
 };
 
+static struct scoop_pcmcia_config poodle_pcmcia_config = {
+	.devs         = &poodle_pcmcia_scoop[0],
+	.num_devs     = 1,
+	.pcmcia_init  = poodle_pcmcia_init,
+};
+
+EXPORT_SYMBOL(poodle_scoop_device);
+
 
 /* LoCoMo device */
 static struct resource locomo_resources[] = {
@@ -268,8 +297,7 @@ static void __init poodle_init(void)
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 
-	scoop_num = 1;
-	scoop_devs = &poodle_pcmcia_scoop[0];
+	platform_scoop_config = &poodle_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {

arch/arm/mach-pxa/spitz.c

@@ -104,6 +104,66 @@ struct platform_device spitzscoop2_device = {
 	.resource	= spitz_scoop2_resources,
 };
 
+#define SPITZ_PWR_SD 0x01
+#define SPITZ_PWR_CF 0x02
+
+/* Power control is shared with between one of the CF slots and SD */
+static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
+{
+	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
+
+	if (new_cpr & 0x0007) {
+	        set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		if (!(cpr & 0x0002) && !(cpr & 0x0004))
+		        mdelay(5);
+		if (device == SPITZ_PWR_CF)
+		        cpr |= 0x0002;
+		if (device == SPITZ_PWR_SD)
+		        cpr |= 0x0004;
+	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+	} else {
+		if (device == SPITZ_PWR_CF)
+		        cpr &= ~0x0002;
+		if (device == SPITZ_PWR_SD)
+		        cpr &= ~0x0004;
+	        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
+		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
+		        mdelay(1);
+		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		}
+	}
+}
+
+static void spitz_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) |	GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
+	GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO85_nPCE_1_MD);
+	pxa_gpio_mode(GPIO54_nPCE_2_MD);
+	pxa_gpio_mode(GPIO104_pSKTSEL_MD);
+}
+
+static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
+{
+	/* Only need to override behaviour for slot 0 */
+	if (nr == 0)
+		spitz_card_pwr_ctrl(SPITZ_PWR_CF, cpr);
+	else
+		write_scoop_reg(scoop, SCOOP_CPR, cpr);
+}
+
 static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 {
 	.dev        = &spitzscoop_device.dev,
@@ -117,6 +177,16 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 },
 };
 
+static struct scoop_pcmcia_config spitz_pcmcia_config = {
+	.devs         = &spitz_pcmcia_scoop[0],
+	.num_devs     = 2,
+	.pcmcia_init  = spitz_pcmcia_init,
+	.power_ctrl   = spitz_pcmcia_pwr,
+};
+
+EXPORT_SYMBOL(spitzscoop_device);
+EXPORT_SYMBOL(spitzscoop2_device);
+
 
 /*
  * Spitz SSP Device
@@ -235,27 +305,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
 	return 0;
 }
 
-/* Power control is shared with one of the CF slots so we have a mess */
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		/* printk(KERN_DEBUG "%s: on\n", __FUNCTION__); */
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
-		mdelay(2);
-		write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | 0x04);
-	} else {
-		/* printk(KERN_DEBUG "%s: off\n", __FUNCTION__); */
-		write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr & ~0x04);
-
-		if (!(cpr | 0x02)) {
-			mdelay(1);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
-		}
-	}
+	if (( 1 << vdd) & p_d->ocr_mask)
+		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0004);
+	else
+		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
 static int spitz_mci_get_ro(struct device *dev)
@@ -351,8 +408,8 @@ static void __init common_init(void)
 
 static void __init spitz_init(void)
 {
-	scoop_num = 2;
-	scoop_devs = &spitz_pcmcia_scoop[0];
+	platform_scoop_config = &spitz_pcmcia_config;
+
 	spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
 
 	common_init();

arch/arm/mach-pxa/time.c

@@ -132,11 +132,13 @@ static void __init pxa_timer_init(void)
 	tv.tv_sec = pxa_get_rtc_time();
 	do_settimeofday(&tv);
 
-	OSMR0 = 0;		/* set initial match at 0 */
+	OIER = 0;		/* disable any timer interrupts */
+	OSCR = LATCH*2;		/* push OSCR out of the way */
+	OSMR0 = LATCH;		/* set initial match */
 	OSSR = 0xf;		/* clear status on all timers */
 	setup_irq(IRQ_OST0, &pxa_timer_irq);
-	OIER |= OIER_E0;	/* enable match on timer 0 to cause interrupts */
-	OSCR = 0;		/* initialize free-running timer, force first match */
+	OIER = OIER_E0;		/* enable match on timer 0 to cause interrupts */
+	OSCR = 0;		/* initialize free-running timer */
 }
 
 #ifdef CONFIG_NO_IDLE_HZ

arch/arm/mach-pxa/tosa.c

@@ -98,6 +98,9 @@ struct platform_device tosascoop_jc_device = {
 	.resource	= tosa_scoop_jc_resources,
 };
 
+/*
+ * PCMCIA
+ */
 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
 {
 	.dev        = &tosascoop_device.dev,
@@ -111,16 +114,155 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
 },
 };
 
+static void tosa_pcmcia_init(void)
+{
+	/* Setup default state of GPIO outputs
+	   before we enable them as outputs. */
+	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
+		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
+		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
+		GPIO_bit(GPIO53_nPCE_2);
+
+	pxa_gpio_mode(GPIO48_nPOE_MD);
+	pxa_gpio_mode(GPIO49_nPWE_MD);
+	pxa_gpio_mode(GPIO50_nPIOR_MD);
+	pxa_gpio_mode(GPIO51_nPIOW_MD);
+	pxa_gpio_mode(GPIO55_nPREG_MD);
+	pxa_gpio_mode(GPIO56_nPWAIT_MD);
+	pxa_gpio_mode(GPIO57_nIOIS16_MD);
+	pxa_gpio_mode(GPIO52_nPCE_1_MD);
+	pxa_gpio_mode(GPIO53_nPCE_2_MD);
+	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+}
+
+static struct scoop_pcmcia_config tosa_pcmcia_config = {
+	.devs         = &tosa_pcmcia_scoop[0],
+	.num_devs     = 2,
+	.pcmcia_init  = tosa_pcmcia_init,
+};
+
+/*
+ * USB Device Controller
+ */
+static void tosa_udc_command(int cmd)
+{
+	switch(cmd)	{
+		case PXA2XX_UDC_CMD_CONNECT:
+			set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+			break;
+		case PXA2XX_UDC_CMD_DISCONNECT:
+			reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
+			break;
+	}
+}
+
+static int tosa_udc_is_connected(void)
+{
+	return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
+}
+
+
+static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.udc_command		= tosa_udc_command,
+	.udc_is_connected	= tosa_udc_is_connected,
+};
+
+/*
+ * MMC/SD Device
+ */
+static struct pxamci_platform_data tosa_mci_platform_data;
+
+static int tosa_mci_init(struct device *dev, irqreturn_t (*tosa_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+
+	/* setup GPIO for PXA25x MMC controller */
+	pxa_gpio_mode(GPIO6_MMCCLK_MD);
+	pxa_gpio_mode(GPIO8_MMCCS0_MD);
+	pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
+
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, SA_INTERRUPT,
+				"MMC/SD card detect", data);
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+
+	set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
+
+	return 0;
+}
+
+static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+	} else {
+		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+	}
+}
+
+static int tosa_mci_get_ro(struct device *dev)
+{
+	return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
+}
+
+static void tosa_mci_exit(struct device *dev, void *data)
+{
+	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+}
+
+static struct pxamci_platform_data tosa_mci_platform_data = {
+	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           = tosa_mci_init,
+	.get_ro		= tosa_mci_get_ro,
+	.setpower       = tosa_mci_setpower,
+	.exit           = tosa_mci_exit,
+};
+
+/*
+ * Irda
+ */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+		pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
+		pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
+	} else {
+		pxa_gpio_mode(GPIO47_STTXD_MD);
+		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+	}
+}
+
+static struct pxaficp_platform_data tosa_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_OFF,
+	.transceiver_mode = tosa_irda_transceiver_mode,
+};
+
+/*
+ * Tosa Keyboard
+ */
+static struct platform_device tosakbd_device = {
+	.name		= "tosa-keyboard",
+	.id		= -1,
+};
 
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tosakbd_device,
 };
 
 static void __init tosa_init(void)
 {
 	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
 	pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
 
 	/* setup sleep mode values */
 	PWER  = 0x00000002;
@@ -131,13 +273,15 @@ static void __init tosa_init(void)
 	PGSR2 = 0x00014000;
 	PCFR |= PCFR_OPDE;
 
-	// enable batt_fault
+	/* enable batt_fault */
 	PMCR = 0x01;
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_mci_info(&tosa_mci_platform_data);
+	pxa_set_udc_info(&udc_info);
+	pxa_set_ficp_info(&tosa_ficp_platform_data);
+	platform_scoop_config = &tosa_pcmcia_config;
 
-	scoop_num = 2;
-	scoop_devs = &tosa_pcmcia_scoop[0];
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 static void __init fixup_tosa(struct machine_desc *desc,

arch/arm/mach-realview/core.c

@@ -550,6 +550,11 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_reg
 
 	timer_tick(regs);
 
+#ifdef CONFIG_SMP
+	smp_send_timer();
+	update_process_times(user_mode(regs));
+#endif
+
 	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;

arch/arm/mach-realview/platsmp.c

@@ -32,7 +32,7 @@ static unsigned int __init get_core_count(void)
 {
 	unsigned int ncores;
 
-	ncores = __raw_readl(IO_ADDRESS(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
+	ncores = __raw_readl(__io_address(REALVIEW_MPCORE_SCU_BASE) + SCU_CONFIG);
 
 	return (ncores & 0x03) + 1;
 }
@@ -133,12 +133,12 @@ static void __init poke_milo(void)
 #if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
 	__raw_writel(virt_to_phys(realview_secondary_startup),
-		     (IO_ADDRESS(REALVIEW_SYS_BASE) +
-		      REALVIEW_SYS_FLAGSS_OFFSET));
+		     __io_address(REALVIEW_SYS_BASE) +
+		     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
 	__raw_writel(3,
-		     (IO_ADDRESS(REALVIEW_SYS_BASE) +
-		      REALVIEW_SYS_FLAGSC_OFFSET));
+		     __io_address(REALVIEW_SYS_BASE) +
+		     REALVIEW_SYS_FLAGSC_OFFSET);
 #endif
 
 	mb();

arch/arm/mach-s3c2410/Kconfig

@@ -121,6 +121,14 @@ config S3C2410_BOOT_WATCHDOG
 	  system resets depends on the value of PCLK. The timeout on an
 	  200MHz s3c2410 should be about 30 seconds.
 
+config S3C2410_BOOT_ERROR_RESET
+	bool "S3C2410 Reboot on decompression error"
+	depends on ARCH_S3C2410
+	help
+	  Say y here to use the watchdog to reset the system if the
+	  kernel decompressor detects an error during decompression.
+
+
 comment "S3C2410 Setup"
 
 config S3C2410_DMA

arch/arm/mach-s3c2410/mach-bast.c

@@ -89,32 +89,63 @@
 
 /* macros to modify the physical addresses for io space */
 
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
 
 static struct map_desc bast_iodesc[] __initdata = {
   /* ISA IO areas */
-
-  { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO),   SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO),   SZ_16M, MT_DEVICE },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	  .pfn		= PA_CS3(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
   /* bast CPLD control registers, and external interrupt controls */
-  { (u32)BAST_VA_CTRL1, BAST_PA_CTRL1,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL2, BAST_PA_CTRL2,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL3, BAST_PA_CTRL3,		   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_CTRL4, BAST_PA_CTRL4,		   SZ_1M, MT_DEVICE },
-
+  {
+	  .virtual	= (u32)BAST_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(BAST_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
   /* PC104 IRQ mux */
-  { (u32)BAST_VA_PC104_IRQREQ,  BAST_PA_PC104_IRQREQ,   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_PC104_IRQRAW,  BAST_PA_PC104_IRQRAW,   SZ_1M, MT_DEVICE },
-  { (u32)BAST_VA_PC104_IRQMASK, BAST_PA_PC104_IRQMASK,  SZ_1M, MT_DEVICE },
+  {
+	  .virtual	= (u32)BAST_VA_PC104_IRQREQ,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQREQ),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQRAW,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQRAW),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)BAST_VA_PC104_IRQMASK,
+	  .pfn		= __phys_to_pfn(BAST_PA_PC104_IRQMASK),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
 
   /* peripheral space... one for each of fast/slow/byte/16bit */
   /* note, ide is only decoded in word space, even though some registers

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -74,27 +74,47 @@
 
 /* macros to modify the physical addresses for io space */
 
-#define PA_CS2(item) ((item) + S3C2410_CS2)
-#define PA_CS3(item) ((item) + S3C2410_CS3)
-#define PA_CS4(item) ((item) + S3C2410_CS4)
-#define PA_CS5(item) ((item) + S3C2410_CS5)
+#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
+#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
+#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
+#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
 
 static struct map_desc vr1000_iodesc[] __initdata = {
   /* ISA IO areas */
-
-  { (u32)S3C24XX_VA_ISA_BYTE, PA_CS2(BAST_PA_ISAIO),	   SZ_16M, MT_DEVICE },
-  { (u32)S3C24XX_VA_ISA_WORD, PA_CS3(BAST_PA_ISAIO),	   SZ_16M, MT_DEVICE },
-
-  /* we could possibly compress the next set down into a set of smaller tables
-   * pagetables, but that would mean using an L2 section, and it still means
-   * we cannot actually feed the same register to an LDR due to 16K spacing
-   */
-
-  /* bast CPLD control registers, and external interrupt controls */
-  { (u32)VR1000_VA_CTRL1, VR1000_PA_CTRL1,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL2, VR1000_PA_CTRL2,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL3, VR1000_PA_CTRL3,	       SZ_1M, MT_DEVICE },
-  { (u32)VR1000_VA_CTRL4, VR1000_PA_CTRL4,	       SZ_1M, MT_DEVICE },
+  {
+	  .virtual	= (u32)S3C24XX_VA_ISA_BYTE,
+	  .pfn		= PA_CS2(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)S3C24XX_VA_ISA_WORD,
+	  .pfn		= PA_CS3(BAST_PA_ISAIO),
+	  .length	= SZ_16M,
+	  .type		= MT_DEVICE,
+  },
+
+  /*  CPLD control registers, and external interrupt controls */
+  {
+	  .virtual	= (u32)VR1000_VA_CTRL1,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL1),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL2,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL2),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL3,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL3),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  }, {
+	  .virtual	= (u32)VR1000_VA_CTRL4,
+	  .pfn		= __phys_to_pfn(VR1000_PA_CTRL4),
+	  .length	= SZ_1M,
+	  .type		= MT_DEVICE,
+  },
 
   /* peripheral space... one for each of fast/slow/byte/16bit */
   /* note, ide is only decoded in word space, even though some registers

arch/arm/mach-sa1100/time.c

@@ -124,11 +124,13 @@ static void __init sa1100_timer_init(void)
 	tv.tv_sec = sa1100_get_rtc_time();
 	do_settimeofday(&tv);
 
-	OSMR0 = 0;		/* set initial match at 0 */
+	OIER = 0;		/* disable any timer interrupts */
+	OSCR = LATCH*2;		/* push OSCR out of the way */
+	OSMR0 = LATCH;		/* set initial match */
 	OSSR = 0xf;		/* clear status on all timers */
 	setup_irq(IRQ_OST0, &sa1100_timer_irq);
-	OIER |= OIER_E0;	/* enable match on timer 0 to cause interrupts */
-	OSCR = 0;		/* initialize free-running timer, force first match */
+	OIER = OIER_E0;		/* enable match on timer 0 to cause interrupts */
+	OSCR = 0;		/* initialize free-running timer */
 }
 
 #ifdef CONFIG_NO_IDLE_HZ

drivers/pcmcia/pxa2xx_sharpsl.c

@@ -22,16 +22,20 @@
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/hardware/scoop.h>
-#ifdef CONFIG_SA1100_COLLIE
-#include <asm/arch-sa1100/collie.h>
-#else
-#include <asm/arch-pxa/pxa-regs.h>
-#endif
 
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
 
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+#define SCOOP_DEV platform_scoop_config->devs
+
 static void sharpsl_pcmcia_init_reset(struct scoop_pcmcia_dev *scoopdev)
 {
 	reset_scoop(scoopdev->dev);
@@ -43,38 +47,16 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	int ret;
 
-#ifndef CONFIG_SA1100_COLLIE
-	/*
-	 * Setup default state of GPIO outputs
-	 * before we enable them as outputs.
-	 */
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-#endif
+	if (platform_scoop_config->pcmcia_init)
+		platform_scoop_config->pcmcia_init();
 
 	/* Register interrupts */
-	if (scoop_devs[skt->nr].cd_irq >= 0) {
+	if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
 		struct pcmcia_irqs cd_irq;
 
 		cd_irq.sock = skt->nr;
-		cd_irq.irq  = scoop_devs[skt->nr].cd_irq;
-		cd_irq.str  = scoop_devs[skt->nr].cd_irq_str;
+		cd_irq.irq  = SCOOP_DEV[skt->nr].cd_irq;
+		cd_irq.str  = SCOOP_DEV[skt->nr].cd_irq_str;
 		ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
 
 		if (ret) {
@@ -83,19 +65,19 @@ static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 		}
 	}
 
-	skt->irq = scoop_devs[skt->nr].irq;
+	skt->irq = SCOOP_DEV[skt->nr].irq;
 
 	return 0;
 }
 
 static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
-	if (scoop_devs[skt->nr].cd_irq >= 0) {
+	if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
 		struct pcmcia_irqs cd_irq;
 
 		cd_irq.sock = skt->nr;
-		cd_irq.irq  = scoop_devs[skt->nr].cd_irq;
-		cd_irq.str  = scoop_devs[skt->nr].cd_irq_str;
+		cd_irq.irq  = SCOOP_DEV[skt->nr].cd_irq;
+		cd_irq.str  = SCOOP_DEV[skt->nr].cd_irq_str;
 		soc_pcmcia_free_irqs(skt, &cd_irq, 1);
 	}
 }
@@ -105,9 +87,9 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 				    struct pcmcia_state *state)
 {
 	unsigned short cpr, csr;
-	struct device *scoop = scoop_devs[skt->nr].dev;
+	struct device *scoop = SCOOP_DEV[skt->nr].dev;
 
-	cpr = read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR);
+	cpr = read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR);
 
 	write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
 	write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
@@ -116,21 +98,25 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	if (csr & 0x0004) {
 		/* card eject */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+		SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
 	}
-	else if (!(scoop_devs[skt->nr].keep_vs & NO_KEEP_VS)) {
+	else if (!(SCOOP_DEV[skt->nr].keep_vs & NO_KEEP_VS)) {
 		/* keep vs1,vs2 */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		csr |= scoop_devs[skt->nr].keep_vs;
+		csr |= SCOOP_DEV[skt->nr].keep_vs;
 	}
 	else if (cpr & 0x0003) {
 		/* power on */
 		write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
-		scoop_devs[skt->nr].keep_vs = (csr & 0x00C0);
+		SCOOP_DEV[skt->nr].keep_vs = (csr & 0x00C0);
 	}
 	else {
 		/* card detect */
-		write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
+	        if ((machine_is_spitz() || machine_is_borzoi()) && skt->nr == 1) {
+	                write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
+	        } else {
+		        write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
+	        }
 	}
 
 	state->detect = (csr & 0x0004) ? 0 : 1;
@@ -144,7 +130,6 @@ static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 	if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
 		printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
 	}
-
 }
 
 
@@ -152,7 +137,7 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				       const socket_state_t *state)
 {
 	unsigned long flags;
-	struct device *scoop = scoop_devs[skt->nr].dev;
+	struct device *scoop = SCOOP_DEV[skt->nr].dev;
 
 	unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
 
@@ -177,8 +162,13 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 	nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
 	nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
 
-	ncpr |= (state->Vcc == 33) ? 0x0001 :
-				(state->Vcc == 50) ? 0x0002 : 0;
+	if ((machine_is_spitz() || machine_is_borzoi() || machine_is_akita()) && skt->nr == 0) {
+	        ncpr |= (state->Vcc == 33) ? 0x0002 :
+		        (state->Vcc == 50) ? 0x0002 : 0;
+	} else {
+	        ncpr |= (state->Vcc == 33) ? 0x0001 :
+		        (state->Vcc == 50) ? 0x0002 : 0;
+	}
 	nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
 	ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
 	nccr |= (state->flags&SS_RESET)? 0x0080: 0;
@@ -190,18 +180,22 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 			((skt->status&SS_WRPROT) ? 0x0008 : 0);
 
 	if (!(ncpr & 0x0003)) {
-		scoop_devs[skt->nr].keep_rd = 0;
-	} else if (!scoop_devs[skt->nr].keep_rd) {
+		SCOOP_DEV[skt->nr].keep_rd = 0;
+	} else if (!SCOOP_DEV[skt->nr].keep_rd) {
 		if (nccr & 0x0080)
-			scoop_devs[skt->nr].keep_rd = 1;
+			SCOOP_DEV[skt->nr].keep_rd = 1;
 		else
 			nccr |= 0x0080;
 	}
 
 	if (mcr != nmcr)
 		write_scoop_reg(scoop, SCOOP_MCR, nmcr);
-	if (cpr != ncpr)
-		write_scoop_reg(scoop, SCOOP_CPR, ncpr);
+	if (cpr != ncpr) {
+		if (platform_scoop_config->power_ctrl)
+			platform_scoop_config->power_ctrl(scoop, ncpr , skt->nr);
+		else
+		        write_scoop_reg(scoop, SCOOP_CPR, ncpr);
+	}
 	if (ccr != nccr)
 		write_scoop_reg(scoop, SCOOP_CCR, nccr);
 	if (imr != nimr)
@@ -214,43 +208,43 @@ static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 
 static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
-	sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
 
 	/* Enable interrupt */
-	write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
-	write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
-	scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
+	write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
+	SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
 
 	if (machine_is_collie())
 		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
+		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
 	/* CF_BUS_OFF */
-	sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+	sharpsl_pcmcia_init_reset(&SCOOP_DEV[skt->nr]);
 
 	if (machine_is_collie())
 		/* We need to disable SS_OUTPUT_ENA here. */
-		write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
+		write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR, read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR) & ~0x0080);
 }
 
 static struct pcmcia_low_level sharpsl_pcmcia_ops = {
-	.owner				= THIS_MODULE,
-	.hw_init			= sharpsl_pcmcia_hw_init,
-	.hw_shutdown		= sharpsl_pcmcia_hw_shutdown,
-	.socket_state		= sharpsl_pcmcia_socket_state,
-	.configure_socket	= sharpsl_pcmcia_configure_socket,
-	.socket_init		= sharpsl_pcmcia_socket_init,
-	.socket_suspend		= sharpsl_pcmcia_socket_suspend,
-	.first				= 0,
-	.nr					= 0,
+	.owner                  = THIS_MODULE,
+	.hw_init                = sharpsl_pcmcia_hw_init,
+	.hw_shutdown            = sharpsl_pcmcia_hw_shutdown,
+	.socket_state           = sharpsl_pcmcia_socket_state,
+	.configure_socket       = sharpsl_pcmcia_configure_socket,
+	.socket_init            = sharpsl_pcmcia_socket_init,
+	.socket_suspend         = sharpsl_pcmcia_socket_suspend,
+	.first                  = 0,
+	.nr                     = 0,
 };
 
-static struct platform_device *sharpsl_pcmcia_device;
-
 #ifdef CONFIG_SA1100_COLLIE
+#include "sa11xx_base.h"
+
 int __init pcmcia_collie_init(struct device *dev)
 {
        int ret = -ENODEV;
@@ -263,11 +257,13 @@ int __init pcmcia_collie_init(struct device *dev)
 
 #else
 
+static struct platform_device *sharpsl_pcmcia_device;
+
 static int __init sharpsl_pcmcia_init(void)
 {
 	int ret;
 
-	sharpsl_pcmcia_ops.nr=scoop_num;
+	sharpsl_pcmcia_ops.nr=platform_scoop_config->num_devs;
 	sharpsl_pcmcia_device = kmalloc(sizeof(*sharpsl_pcmcia_device), GFP_KERNEL);
 	if (!sharpsl_pcmcia_device)
 		return -ENOMEM;
@@ -275,7 +271,7 @@ static int __init sharpsl_pcmcia_init(void)
 	memset(sharpsl_pcmcia_device, 0, sizeof(*sharpsl_pcmcia_device));
 	sharpsl_pcmcia_device->name = "pxa2xx-pcmcia";
 	sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
-	sharpsl_pcmcia_device->dev.parent=scoop_devs[0].dev;
+	sharpsl_pcmcia_device->dev.parent=platform_scoop_config->devs[0].dev;
 
 	ret = platform_device_register(sharpsl_pcmcia_device);
 	if (ret)

drivers/video/amba-clcd.c

@@ -518,7 +518,7 @@ static struct amba_driver clcd_driver = {
 	.id_table	= clcdfb_id_table,
 };
 
-int __init amba_clcdfb_init(void)
+static int __init amba_clcdfb_init(void)
 {
 	if (fb_get_options("ambafb", NULL))
 		return -ENODEV;

include/asm-arm/arch-s3c2410/uncompress.h

@@ -116,6 +116,8 @@ putstr(const char *ptr)
 	}
 }
 
+#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
+
 /* CONFIG_S3C2410_BOOT_WATCHDOG
  *
  * Simple boot-time watchdog setup, to reboot the system if there is
@@ -126,8 +128,6 @@ putstr(const char *ptr)
 
 #define WDOG_COUNT (0xff00)
 
-#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
-
 static inline void arch_decomp_wdog(void)
 {
 	__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
@@ -145,6 +145,24 @@ static void arch_decomp_wdog_start(void)
 #define arch_decomp_wdog()
 #endif
 
+#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+	putstr("\n\n");
+	putstr(x);
+	putstr("\n\n -- System resetting\n");
+
+	__raw_writel(0x4000, S3C2410_WTDAT);
+	__raw_writel(0x4000, S3C2410_WTCNT);
+	__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+	while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
 static void error(char *err);
 
 static void

include/asm-arm/hardirq.h

@@ -8,6 +8,7 @@
 
 typedef struct {
 	unsigned int __softirq_pending;
+	unsigned int local_timer_irqs;
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */

include/asm-arm/hardware/scoop.h

@@ -52,8 +52,14 @@ struct scoop_pcmcia_dev {
 	unsigned char keep_rd;
 };
 
-extern int scoop_num;
-extern struct scoop_pcmcia_dev *scoop_devs;
+struct scoop_pcmcia_config {
+	struct scoop_pcmcia_dev *devs;
+	int num_devs;
+	void (*pcmcia_init)(void);
+	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
+};
+
+extern struct scoop_pcmcia_config *platform_scoop_config;
 
 void reset_scoop(struct device *dev);
 unsigned short set_scoop_gpio(struct device *dev, unsigned short bit);

include/asm-arm/smp.h

@@ -36,6 +36,11 @@ struct seq_file;
  */
 extern void show_ipi_list(struct seq_file *p);
 
+/*
+ * Called from assembly code, this handles an IPI.
+ */
+asmlinkage void do_IPI(struct pt_regs *regs);
+
 /*
  * Move global data into per-processor storage.
  */
@@ -46,12 +51,23 @@ extern void smp_store_cpu_info(unsigned int cpuid);
  */
 extern void smp_cross_call(cpumask_t callmap);
 
+/*
+ * Broadcast a timer interrupt to the other CPUs.
+ */
+extern void smp_send_timer(void);
+
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
  */
 extern int boot_secondary(unsigned int cpu, struct task_struct *);
 
+/*
+ * Called from platform specific assembly code, this is the
+ * secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
 /*
  * Perform platform specific initialisation of the specified CPU.
  */
@@ -76,4 +92,42 @@ extern void platform_cpu_die(unsigned int cpu);
 extern int platform_cpu_kill(unsigned int cpu);
 extern void platform_cpu_enable(unsigned int cpu);
 
+#ifdef CONFIG_LOCAL_TIMERS
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+extern void local_timer_setup(unsigned int cpu);
+
+/*
+ * Stop a local timer interrupt.
+ */
+extern void local_timer_stop(unsigned int cpu);
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ
+ */
+extern int local_timer_ack(void);
+
+#else
+
+static inline void local_timer_setup(unsigned int cpu)
+{
+}
+
+static inline void local_timer_stop(unsigned int cpu)
+{
+}
+
+#endif
+
+/*
+ * show local interrupt info
+ */
+extern void show_local_irqs(struct seq_file *);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
 #endif /* ifndef __ASM_ARM_SMP_H */