Commit a02d46dd authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Nicolas Ferre

ARM: at91/dt: Add Acme Arietta G25

Add a minimum Device Tree for Acme Arietta G25.
http://acme.systems/ariettaSigned-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarSergio Tanzilli <tanzilli@acmesystems.it>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent e1e6c322
...@@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ ...@@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
at91sam9n12ek.dtb \ at91sam9n12ek.dtb \
at91sam9rlek.dtb \ at91sam9rlek.dtb \
at91-ariag25.dtb \ at91-ariag25.dtb \
at91-ariettag25.dtb \
at91-cosino_mega2560.dtb \ at91-cosino_mega2560.dtb \
at91-kizboxmini.dtb \ at91-kizboxmini.dtb \
at91sam9g15ek.dtb \ at91sam9g15ek.dtb \
......
/*
* Device Tree file for Arietta G25
* This device tree is minimal, to activate more peripherals, see:
* http://dts.acmesystems.it/arietta/
*/
/dts-v1/;
#include "at91sam9g25.dtsi"
/ {
model = "Acme Systems Arietta G25";
compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
aliases {
serial0 = &dbgu;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
reg = <0x20000000 0x8000000>;
};
clocks {
slow_xtal {
clock-frequency = <32768>;
};
main_xtal {
clock-frequency = <12000000>;
};
};
ahb {
apb {
mmc0: mmc@f0008000 {
pinctrl-0 = <
&pinctrl_mmc0_slot0_clk_cmd_dat0
&pinctrl_mmc0_slot0_dat1_3>;
status = "okay";
slot@0 {
reg = <0>;
bus-width = <4>;
};
};
usb2: gadget@f803c000 {
status = "okay";
};
dbgu: serial@fffff200 {
status = "okay";
};
rtc@fffffeb0 {
status = "okay";
};
};
usb0: ohci@00600000 {
status = "okay";
num-ports = <3>;
};
usb1: ehci@00700000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
arietta_led {
label = "arietta_led";
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
linux,default-trigger = "heartbeat";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment