Commit a052158a authored by Bartosz Markowski's avatar Bartosz Markowski Committed by Kalle Valo

ath10k: fix QCA61X4 boot up

commit a521ee98 ("ath10k: Add new reg_address/mask to hw register
table") broke QCA61x4 support by providing wrong
fw_indicator_address, which should have been 0x0003a028 instead of 0x00009028.

User experience was a failing boot up sequence (crashing device during
initialization):

[  181.663874] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[  181.664787] ath10k_pci 0000:02:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
[  181.688886] ath10k_pci 0000:02:00.0: device has crashed during init
[  181.688897] ath10k_pci 0000:02:00.0: failed to wait for target after cold reset: -70
[  181.688902] ath10k_pci 0000:02:00.0: failed to reset chip: -70
[  181.689774] ath10k_pci: probe of 0000:02:00.0 failed with error -70

Fix it by updating the address with correct value.

Fixes: a521ee98 ("ath10k: Add new reg_address/mask to hw register table")
Signed-off-by: default avatarBartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent d9156b5f
...@@ -63,7 +63,7 @@ const struct ath10k_hw_regs qca6174_regs = { ...@@ -63,7 +63,7 @@ const struct ath10k_hw_regs qca6174_regs = {
.soc_reset_control_ce_rst_mask = 0x00000001, .soc_reset_control_ce_rst_mask = 0x00000001,
.soc_chip_id_address = 0x000000f0, .soc_chip_id_address = 0x000000f0,
.scratch_3_address = 0x00000028, .scratch_3_address = 0x00000028,
.fw_indicator_address = 0x00009028, .fw_indicator_address = 0x0003a028,
.pcie_local_base_address = 0x00080000, .pcie_local_base_address = 0x00080000,
.ce_wrap_intr_sum_host_msi_lsb = 0x00000008, .ce_wrap_intr_sum_host_msi_lsb = 0x00000008,
.ce_wrap_intr_sum_host_msi_mask = 0x0000ff00, .ce_wrap_intr_sum_host_msi_mask = 0x0000ff00,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment