clk: meson: clk-pll: drop CLK_GET_RATE_NOCACHE where unnecessary

[ Upstream commit 2303a9ca ]

CLK_GET_RATE_NOCACHE should only be necessary when the registers
controlling the rate of clock may change outside of CCF. On Amlogic,
it should only be the case for the hdmi pll which is directly controlled
by the display driver (WIP to fix this).

The other plls should not require this flag.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/clk/meson/axg.c

@@ -96,7 +96,6 @@ static struct clk_regmap axg_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 

drivers/clk/meson/gxbb.c

@@ -213,7 +213,6 @@ static struct clk_regmap gxbb_fixed_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -276,6 +275,10 @@ static struct clk_regmap gxbb_hdmi_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "hdmi_pll_pre_mult" },
 		.num_parents = 1,
+		/*
+		 * Display directly handle hdmi pll registers ATM, we need
+		 * NOCACHE to keep our view of the clock as accurate as possible
+		 */
 		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
@@ -334,6 +337,10 @@ static struct clk_regmap gxl_hdmi_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
+		/*
+		 * Display directly handle hdmi pll registers ATM, we need
+		 * NOCACHE to keep our view of the clock as accurate as possible
+		 */
 		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
@@ -371,7 +378,6 @@ static struct clk_regmap gxbb_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -418,7 +424,6 @@ static struct clk_regmap gxbb_gp0_pll = {
 		.ops = &meson_clk_pll_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -472,7 +477,6 @@ static struct clk_regmap gxl_gp0_pll = {
 		.ops = &meson_clk_pll_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 

drivers/clk/meson/meson8b.c

@@ -132,7 +132,6 @@ static struct clk_regmap meson8b_fixed_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -169,7 +168,6 @@ static struct clk_regmap meson8b_vid_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };
 
@@ -207,7 +205,6 @@ static struct clk_regmap meson8b_sys_pll = {
 		.ops = &meson_clk_pll_ro_ops,
 		.parent_names = (const char *[]){ "xtal" },
 		.num_parents = 1,
-		.flags = CLK_GET_RATE_NOCACHE,
 	},
 };